Revision 1226
Added by Aaron Marcuse-Kubitza almost 13 years ago
| VegX.plots.full.csv | ||
|---|---|---|
| 16 | 16 |
"precip_mm","/simpleUserdefined[name=precipMm]/value", |
| 17 | 17 |
"slope_aspect","/*UniqueIdentifierID->/*s/plot/slopeAspect", |
| 18 | 18 |
"slope_gradient","/*UniqueIdentifierID->/*s/plot/slopeGradient", |
| 19 |
"clay_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=clayPercent]/value", |
|
| 20 |
"silt_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=siltPercent]/value", |
|
| 21 |
"sand_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=sandPercent]/value", |
|
| 22 |
"organic_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=organicPercent]/value", |
|
| 19 |
"clay_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=clayPercent]/value/_units:[units=""%""]/value",
|
|
| 20 |
"silt_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=siltPercent]/value/_units:[units=""%""]/value",
|
|
| 21 |
"sand_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=sandPercent]/value/_units:[units=""%""]/value",
|
|
| 22 |
"organic_percent","->/*s/abioticObservation[*ID]/simpleUserdefined[name=organicPercent]/value/_units:[units=""%""]/value",
|
|
| 23 | 23 |
"pH","->/*s/abioticObservation[*ID]/ph","Brad: For all these soil variables, how do we store information on method, units. Seems like an ontological structure would be more appropriate (measurementName, measurementValue, measurementUnits, measurementMethod). Same as BIEN traits table. Something to discuss." |
| 24 |
"soil_N","->/*s/abioticObservation[*ID]/nitrogen", |
|
| 25 |
"soil_P","->/*s/abioticObservation[*ID]/phosphorus", |
|
| 26 |
"soil_C","->/*s/abioticObservation[*ID]/simpleUserdefined[name=carbon]/value", |
|
| 27 |
"soil_K","->/*s/abioticObservation[*ID]/pottasium", |
|
| 28 |
"soil_Mg","->/*s/abioticObservation[*ID]/magnesium", |
|
| 29 |
"soil_Ca","->/*s/abioticObservation[*ID]/simpleUserdefined[name=calcium]/value", |
|
| 30 |
"soil_Na","->/*s/abioticObservation[*ID]/simpleUserdefined[name=sodium]/value", |
|
| 31 |
"soil_acidity","->/*s/abioticObservation[*ID]/simpleUserdefined[name=acidity]/value", |
|
| 32 |
"soil_base","->/*s/abioticObservation[*ID]/simpleUserdefined[name=base]/value", |
|
| 24 |
"soil_N","->/*s/abioticObservation[*ID]/nitrogen/_units:[units=""%""]/value",
|
|
| 25 |
"soil_P","->/*s/abioticObservation[*ID]/phosphorus/_map:[""<1,5""=0]/value/_units:[units=""%""]/value",
|
|
| 26 |
"soil_C","->/*s/abioticObservation[*ID]/simpleUserdefined[name=carbon]/value/_units:[units=""%""]/value",
|
|
| 27 |
"soil_K","->/*s/abioticObservation[*ID]/pottasium/_units:[units=""%""]/value",
|
|
| 28 |
"soil_Mg","->/*s/abioticObservation[*ID]/magnesium/_units:[units=""%""]/value",
|
|
| 29 |
"soil_Ca","->/*s/abioticObservation[*ID]/simpleUserdefined[name=calcium]/value/_units:[units=""%""]/value",
|
|
| 30 |
"soil_Na","->/*s/abioticObservation[*ID]/simpleUserdefined[name=sodium]/value/_units:[units=""%""]/value",
|
|
| 31 |
"soil_acidity","->/*s/abioticObservation[*ID]/simpleUserdefined[name=acidity]/value/_map:[""<0.05""=0]/value/_units:[units=""%""]/value",
|
|
| 32 |
"soil_base","->/*s/abioticObservation[*ID]/simpleUserdefined[name=base]/value/_units:[units=""%""]/value",
|
|
| 33 | 33 |
"soil_cation_cap","->/*s/abioticObservation[*ID]/simpleUserdefined[name=cationCap]/value", |
| 34 | 34 |
"soil_conductivity","->/*s/abioticObservation[*ID]/simpleUserdefined[name=conductivity]/value", |
| 35 | 35 |
"soil_texture","->/*s/abioticObservation[*ID]/simpleUserdefined[name=texture]/value", |
Also available in: Unified diff
SALVIAS inputs: Use new _units:[units="%"] on soil fields that are percents. Replace "<..." values with 0.