Revision 4908
Added by Aaron Marcuse-Kubitza about 12 years ago
| map.csv | ||
|---|---|---|
| 16 | 16 |
precip_mm,precipitation,, |
| 17 | 17 |
slope_aspect,slopeAspect,, |
| 18 | 18 |
slope_gradient,slopeGradient,, |
| 19 |
clay_percent,clay,"/_units:[default=""%"",to=]/value", |
|
| 20 |
silt_percent,silt,"/_units:[default=""%"",to=]/value", |
|
| 21 |
sand_percent,sand,"/_units:[default=""%"",to=]/value", |
|
| 22 |
organic_percent,organic,"/_units:[default=""%"",to=]/value", |
|
| 19 |
clay_percent,clay_percent,"/_units:[default=""%"",to=]/value",
|
|
| 20 |
silt_percent,silt_percent,"/_units:[default=""%"",to=]/value",
|
|
| 21 |
sand_percent,sand_percent,"/_units:[default=""%"",to=]/value",
|
|
| 22 |
organic_percent,organic_percent,"/_units:[default=""%"",to=]/value",
|
|
| 23 | 23 |
pH,ph,,"Brad: For all these soil variables, how do we store information on method, units. Seems like an ontological structure would be more appropriate (measurementName, measurementValue, measurementUnits, measurementMethod). Same as BIEN traits table. Something to discuss." |
| 24 |
soil_N,nitrogen,"/_units:[default=""%"",to=]/value", |
|
| 25 |
soil_P,phosphorus,"/_units:[default=""%"",to=]/value/_map:[""<1,5""=0,*=*]/value", |
|
| 26 |
soil_C,carbon,"/_units:[default=""%"",to=]/value", |
|
| 27 |
soil_K,potassium,"/_units:[default=""%"",to=]/value", |
|
| 28 |
soil_Mg,magnesium,"/_units:[default=""%"",to=]/value", |
|
| 29 |
soil_Ca,calcium,"/_units:[default=""%"",to=]/value", |
|
| 30 |
soil_Na,sodium,"/_units:[default=""%"",to=]/value", |
|
| 31 |
soil_acidity,acidity,"/_units:[default=""%"",to=]/value/_map:[""<0.05""=0,*=*]/value", |
|
| 32 |
soil_base,baseSaturation,"/_units:[default=""%"",to=]/value", |
|
| 33 |
soil_cation_cap,cationExchangeCapacity,, |
|
| 24 |
soil_N,nitrogen_percent,"/_units:[default=""%"",to=]/value",
|
|
| 25 |
soil_P,phosphorus_percent,"/_units:[default=""%"",to=]/value/_map:[""<1,5""=0,*=*]/value",
|
|
| 26 |
soil_C,carbon_percent,"/_units:[default=""%"",to=]/value",
|
|
| 27 |
soil_K,potassium_percent,"/_units:[default=""%"",to=]/value",
|
|
| 28 |
soil_Mg,magnesium_percent,"/_units:[default=""%"",to=]/value",
|
|
| 29 |
soil_Ca,calcium_percent,"/_units:[default=""%"",to=]/value",
|
|
| 30 |
soil_Na,sodium_percent,"/_units:[default=""%"",to=]/value",
|
|
| 31 |
soil_acidity,acidity_percent,"/_units:[default=""%"",to=]/value/_map:[""<0.05""=0,*=*]/value",
|
|
| 32 |
soil_base,baseSaturation_percent,"/_units:[default=""%"",to=]/value",
|
|
| 33 |
soil_cation_cap,cationExchangeCapacity_cmol_kg,,
|
|
| 34 | 34 |
soil_conductivity,conductivity,, |
| 35 | 35 |
soil_texture,texture,, |
| 36 | 36 |
holdridge_life_zone,communityID,, |
Also available in: Unified diff
mappings/VegCore.csv: Soil component measurements: Added default units of percent (cmol_kg for cationExchangeCapacity). This involves translating the names everywhere and adding a _percent_to_fraction conversion in mappings/VegCore-VegBIEN.csv.