Revision 673
Added by Aaron Marcuse-Kubitza almost 13 years ago
| SALVIAS-VegBIEN.organisms.csv | ||
|---|---|---|
| 7 | 7 |
intercept_cm,"/aggregateoccurrence/definedvalue[*_id/userdefined[tablename=aggregateoccurrence,userdefinedname=interceptCm]]:[@fkey=tableRecord_ID]/definedvalue","Brad: Incorrect for VegBank This is an aggregate observation. Used in line-intercept methodology only, describes the point along centerline at which an individual intercepts the center line of the plot. Used to determin relative abundance." |
| 8 | 8 |
height_m,/aggregateoccurrence/plantobservation/overallheight,Brad: Incorrect for VegBank. This is a measurement applied to a single tree. Check with Bob |
| 9 | 9 |
stem_height_m,/aggregateoccurrence/plantobservation/overallheight,"Brad: Same as for height, but applies to individuals stems, not trees. Rare." |
| 10 |
stem_tag1,/aggregateoccurrence/plantobservation/stem/authorstemcode,"Brad: Same as tag1 & tag2, but applied to individual stems. I'm still not clear how to distinguish between methods which tag only individuals trees, and those which tag individual stems." |
|
| 11 |
stem_tag2,/aggregateoccurrence/plantobservation/stem/authorstemcode,Brad: see above |
|
| 12 |
tag2,/aggregateoccurrence/plantobservation/stem/authorstemcode/_alt/1,"Brad: See commend for tag1. Your mapping for tag2 looks correct. Probably both values would go here, only nested, with one superceding the other." |
|
| 13 |
tag1,/aggregateoccurrence/plantobservation/stem/authorstemcode/_alt/2,"Brad: Another type of code, typically a number, used by the original data provider to indicate an individual tree. These are numbers on physical tags attached to the tree. Tag2 Is the same thing, only used if the first tag was lost. Obviously not a good system as it's possible a tree tag could be lost and changed more than once." |
|
| 14 |
basal_diam,"/aggregateoccurrence/plantobservation/stem/definedvalue[*_id/userdefined[tablename=stem,userdefinedname=basalDiameter]]:[@fkey=tableRecord_ID]/definedvalue",
|
|
| 15 |
stem_canopy_form,"/aggregateoccurrence/plantobservation/stem/definedvalue[*_id/userdefined[tablename=stem,userdefinedname=canopyForm]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Should also be userDefined for VegBank.
|
|
| 16 |
stem_canopy_position,"/aggregateoccurrence/plantobservation/stem/definedvalue[*_id/userdefined[tablename=stem,userdefinedname=canopyPosition]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Should also be userDefined for VegBank.
|
|
| 17 |
ht_first_branch_m,"/aggregateoccurrence/plantobservation/stem/definedvalue[*_id/userdefined[tablename=stem,userdefinedname=heightFirstBranchM]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Incorrect for VegBank. This is a measurement applied to a single tree. Check with Bob
|
|
| 18 |
stem_height_first_branch_m,"/aggregateoccurrence/plantobservation/stem/definedvalue[*_id/userdefined[tablename=stem,userdefinedname=heightFirstBranchM]]:[@fkey=tableRecord_ID]/definedvalue","Brad: Should also be userDefined for VegBank. Same as for ht_first_branch_m, but applies to individuals stems, not trees. Rare."
|
|
| 19 |
stem_liana_infestation,"/aggregateoccurrence/plantobservation/stem/definedvalue[*_id/userdefined[tablename=stem,userdefinedname=lianaInfestation]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Should also be userDefined for VegBank.
|
|
| 20 |
stem_dbh,/aggregateoccurrence/plantobservation/stem/diameter, |
|
| 21 |
x_position,/aggregateoccurrence/plantobservation/stem/xposition,"Brad: Correct for VegBank. I'm not so sure for VegX. Let's ask Nick about this. These are important, fundamental values of many tree plots, and should be accommodated within VegX." |
|
| 22 |
y_position,/aggregateoccurrence/plantobservation/stem/yposition,Brad: See comment above for x_position |
|
| 10 |
stem_tag1,/aggregateoccurrence/plantobservation/stemobservation/authorstemcode,"Brad: Same as tag1 & tag2, but applied to individual stems. I'm still not clear how to distinguish between methods which tag only individuals trees, and those which tag individual stems."
|
|
| 11 |
stem_tag2,/aggregateoccurrence/plantobservation/stemobservation/authorstemcode,Brad: see above
|
|
| 12 |
tag2,/aggregateoccurrence/plantobservation/stemobservation/authorstemcode/_alt/1,"Brad: See commend for tag1. Your mapping for tag2 looks correct. Probably both values would go here, only nested, with one superceding the other."
|
|
| 13 |
tag1,/aggregateoccurrence/plantobservation/stemobservation/authorstemcode/_alt/2,"Brad: Another type of code, typically a number, used by the original data provider to indicate an individual tree. These are numbers on physical tags attached to the tree. Tag2 Is the same thing, only used if the first tag was lost. Obviously not a good system as it's possible a tree tag could be lost and changed more than once."
|
|
| 14 |
basal_diam,"/aggregateoccurrence/plantobservation/stemobservation/definedvalue[*_id/userdefined[tablename=stemobservation,userdefinedname=basalDiameter]]:[@fkey=tableRecord_ID]/definedvalue",
|
|
| 15 |
stem_canopy_form,"/aggregateoccurrence/plantobservation/stemobservation/definedvalue[*_id/userdefined[tablename=stemobservation,userdefinedname=canopyForm]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Should also be userDefined for VegBank.
|
|
| 16 |
stem_canopy_position,"/aggregateoccurrence/plantobservation/stemobservation/definedvalue[*_id/userdefined[tablename=stemobservation,userdefinedname=canopyPosition]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Should also be userDefined for VegBank.
|
|
| 17 |
ht_first_branch_m,"/aggregateoccurrence/plantobservation/stemobservation/definedvalue[*_id/userdefined[tablename=stemobservation,userdefinedname=heightFirstBranchM]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Incorrect for VegBank. This is a measurement applied to a single tree. Check with Bob
|
|
| 18 |
stem_height_first_branch_m,"/aggregateoccurrence/plantobservation/stemobservation/definedvalue[*_id/userdefined[tablename=stemobservation,userdefinedname=heightFirstBranchM]]:[@fkey=tableRecord_ID]/definedvalue","Brad: Should also be userDefined for VegBank. Same as for ht_first_branch_m, but applies to individuals stems, not trees. Rare."
|
|
| 19 |
stem_liana_infestation,"/aggregateoccurrence/plantobservation/stemobservation/definedvalue[*_id/userdefined[tablename=stemobservation,userdefinedname=lianaInfestation]]:[@fkey=tableRecord_ID]/definedvalue",Brad: Should also be userDefined for VegBank.
|
|
| 20 |
stem_dbh,/aggregateoccurrence/plantobservation/stemobservation/diameter,
|
|
| 21 |
x_position,/aggregateoccurrence/plantobservation/stemobservation/xposition,"Brad: Correct for VegBank. I'm not so sure for VegX. Let's ask Nick about this. These are important, fundamental values of many tree plots, and should be accommodated within VegX."
|
|
| 22 |
y_position,/aggregateoccurrence/plantobservation/stemobservation/yposition,Brad: See comment above for x_position
|
|
| 23 | 23 |
census_no,"/definedvalue[*_id/userdefined[tablename=taxonoccurrence,userdefinedname=censusNo]]:[@fkey=tableRecord_ID]/definedvalue","Brad: Assigned by SALVIAS. 1 for first plot, then 2, 3, etc. I can't recall if we even have repeat censuses in SALVIAS. Probably not." |
| 24 | 24 |
habit,"/definedvalue[*_id/userdefined[tablename=taxonoccurrence,userdefinedname=habit]]:[@fkey=tableRecord_ID]/definedvalue","Brad: Incorrect for VegBank, correct for VegX. This is growth form (tree, shrub, herb, etc.). It is an observation of a trait." |
| 25 | 25 |
individual_code,"/definedvalue[*_id/userdefined[tablename=taxonoccurrence,userdefinedname=individualCode]]:[@fkey=tableRecord_ID]/definedvalue","Brad: Code, if any, used by the data provider to indicate an individual tree. Scope is unknown, although typically this value is unique only within plot, or sometimes only within subplot." |
Also available in: Unified diff
VegBIEN: Renamed stem to stemobservation