Project

General

Profile

1 1722 aaronmk
# -----------------------------
2
# PostgreSQL configuration file
3
# -----------------------------
4
#
5
# This file consists of lines of the form:
6
#
7
#   name = value
8
#
9
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
10
# "#" anywhere on a line.  The complete list of parameter names and allowed
11
# values can be found in the PostgreSQL documentation.
12
#
13
# The commented-out settings shown in this file represent the default values.
14
# Re-commenting a setting is NOT sufficient to revert it to the default value;
15
# you need to reload the server.
16
#
17
# This file is read on server startup and when the server receives a SIGHUP
18
# signal.  If you edit the file on a running system, you have to SIGHUP the
19
# server for the changes to take effect, or use "pg_ctl reload".  Some
20
# parameters, which are marked below, require a server shutdown and restart to
21
# take effect.
22
#
23
# Any parameter can also be given as a command-line option to the server, e.g.,
24
# "postgres -c log_connections=on".  Some parameters can be changed at run time
25
# with the "SET" SQL command.
26
#
27
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
28
#                MB = megabytes                     s   = seconds
29
#                GB = gigabytes                     min = minutes
30
#                                                   h   = hours
31
#                                                   d   = days
32
33
34
#------------------------------------------------------------------------------
35
# FILE LOCATIONS
36
#------------------------------------------------------------------------------
37
38
# The default values of these variables are driven from the -D command-line
39
# option or PGDATA environment variable, represented here as ConfigDir.
40
41
#data_directory = 'ConfigDir'		# use data in another directory
42
					# (change requires restart)
43
#hba_file = 'ConfigDir/pg_hba.conf'	# host-based authentication file
44
					# (change requires restart)
45
#ident_file = 'ConfigDir/pg_ident.conf'	# ident configuration file
46
					# (change requires restart)
47
48
# If external_pid_file is not explicitly set, no extra PID file is written.
49
#external_pid_file = '(none)'		# write an extra PID file
50
					# (change requires restart)
51
52
53
#------------------------------------------------------------------------------
54
# CONNECTIONS AND AUTHENTICATION
55
#------------------------------------------------------------------------------
56
57
# - Connection Settings -
58
59 11088 aaronmk
listen_addresses = '*'		# what IP address(es) to listen on;
60 1722 aaronmk
					# comma-separated list of addresses;
61
					# defaults to 'localhost', '*' = all
62
					# (change requires restart)
63
#port = 5432				# (change requires restart)
64
max_connections = 100			# (change requires restart)
65 6195 aaronmk
# Note:  Increasing max_connections costs ~400 bytes of shared memory per
66 1722 aaronmk
# connection slot, plus lock space (see max_locks_per_transaction).
67
#superuser_reserved_connections = 3	# (change requires restart)
68 6199 aaronmk
unix_socket_directory = '/tmp'		# (change requires restart)
69 1722 aaronmk
#unix_socket_directory = ''		# (change requires restart)
70
#unix_socket_group = ''			# (change requires restart)
71
#unix_socket_permissions = 0777		# begin with 0 to use octal notation
72
					# (change requires restart)
73
#bonjour = off				# advertise server via Bonjour
74
					# (change requires restart)
75
#bonjour_name = ''			# defaults to the computer name
76
					# (change requires restart)
77
78
# - Security and Authentication -
79
80
#authentication_timeout = 1min		# 1s-600s
81 6195 aaronmk
#ssl = off				# (change requires restart)
82 1722 aaronmk
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
83
					# (change requires restart)
84
#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
85
#password_encryption = on
86
#db_user_namespace = off
87
88
# Kerberos and GSSAPI
89
#krb_server_keyfile = ''
90
#krb_srvname = 'postgres'		# (Kerberos only)
91
#krb_caseins_users = off
92
93
# - TCP Keepalives -
94
# see "man 7 tcp" for details
95
96
#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
97
					# 0 selects the system default
98
#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
99
					# 0 selects the system default
100
#tcp_keepalives_count = 0		# TCP_KEEPCNT;
101
					# 0 selects the system default
102
103
104
#------------------------------------------------------------------------------
105
# RESOURCE USAGE (except WAL)
106
#------------------------------------------------------------------------------
107
108
# - Memory -
109
110
# Set to slightly less than SHMMAX = 1.4GB
111
shared_buffers = 1400MB			# min 128kB
112
#shared_buffers = 32MB			# min 128kB
113
					# (change requires restart)
114
#temp_buffers = 8MB			# min 800kB
115
#max_prepared_transactions = 0		# zero disables the feature
116
					# (change requires restart)
117
# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
118
# per transaction slot, plus lock space (see max_locks_per_transaction).
119
# It is not advisable to set max_prepared_transactions nonzero unless you
120
# actively intend to use prepared transactions.
121
work_mem = 256MB				# min 64kB
122
#work_mem = 1MB				# min 64kB
123
maintenance_work_mem = 256MB		# min 1MB
124
#maintenance_work_mem = 16MB		# min 1MB
125
#max_stack_depth = 2MB			# min 100kB
126
127
# - Kernel Resource Usage -
128
129
#max_files_per_process = 1000		# min 25
130
					# (change requires restart)
131
#shared_preload_libraries = ''		# (change requires restart)
132
133
# - Cost-Based Vacuum Delay -
134
135
#vacuum_cost_delay = 0ms		# 0-100 milliseconds
136
#vacuum_cost_page_hit = 1		# 0-10000 credits
137
#vacuum_cost_page_miss = 10		# 0-10000 credits
138
#vacuum_cost_page_dirty = 20		# 0-10000 credits
139
#vacuum_cost_limit = 200		# 1-10000 credits
140
141
# - Background Writer -
142
143
#bgwriter_delay = 200ms			# 10-10000ms between rounds
144
#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
145
#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
146
147
# - Asynchronous Behavior -
148
149
#effective_io_concurrency = 1		# 1-1000. 0 disables prefetching
150
151
152
#------------------------------------------------------------------------------
153
# WRITE AHEAD LOG
154
#------------------------------------------------------------------------------
155
156
# - Settings -
157
158
#wal_level = minimal			# minimal, archive, or hot_standby
159
					# (change requires restart)
160
#fsync = on				# turns forced synchronization on or off
161
##### WARNING: Switching this off may cause data loss.
162
# It is used to improve performance with frequent commits. Each datasource makes
163
# ~10 commits/sec (which will hopefully increase after optimization), and there
164
# can be 10+ datasources running simultaneously, so the 100 commit/sec limit may
165
# be exceeded. See synchronous_commit at
166
# <http://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server#synchronous_commit>
167
#####
168
synchronous_commit = off		# immediate fsync at commit
169 6195 aaronmk
#wal_sync_method = fsync		# the default is the first option
170 1722 aaronmk
					# supported by the operating system:
171
					#   open_datasync
172
					#   fdatasync (default on Linux)
173
					#   fsync
174
					#   fsync_writethrough
175
					#   open_sync
176
#full_page_writes = on			# recover from partial page writes
177 6195 aaronmk
#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
178 1722 aaronmk
					# (change requires restart)
179
#wal_writer_delay = 200ms		# 1-10000 milliseconds
180
181
#commit_delay = 0			# range 0-100000, in microseconds
182
#commit_siblings = 5			# range 1-1000
183
184
# - Checkpoints -
185
186
checkpoint_segments = 32		# in logfile segments, min 1, 16MB each
187
#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
188
#checkpoint_timeout = 5min		# range 30s-1h
189
checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
190
#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
191
#checkpoint_warning = 30s		# 0 disables
192
193
# - Archiving -
194
195
#archive_mode = off		# allows archiving to be done
196
				# (change requires restart)
197
#archive_command = ''		# command to use to archive a logfile segment
198
#archive_timeout = 0		# force a logfile segment switch after this
199
				# number of seconds; 0 disables
200
201
202 6195 aaronmk
#------------------------------------------------------------------------------
203
# REPLICATION
204
#------------------------------------------------------------------------------
205
206
# - Master Server -
207
208
# These settings are ignored on a standby server
209
210 1722 aaronmk
#max_wal_senders = 0		# max number of walsender processes
211
				# (change requires restart)
212 6195 aaronmk
#wal_sender_delay = 1s		# walsender cycle time, 1-10000 milliseconds
213 1722 aaronmk
#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
214
#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
215 6195 aaronmk
#replication_timeout = 60s	# in milliseconds; 0 disables
216
#synchronous_standby_names = ''	# standby servers that provide sync rep
217
				# comma-separated list of application_name
218
				# from standby(s); '*' = all
219 1722 aaronmk
220
# - Standby Servers -
221
222 6195 aaronmk
# These settings are ignored on a master server
223
224 1722 aaronmk
#hot_standby = off			# "on" allows queries during recovery
225
					# (change requires restart)
226
#max_standby_archive_delay = 30s	# max delay before canceling queries
227
					# when reading WAL from archive;
228
					# -1 allows indefinite delay
229
#max_standby_streaming_delay = 30s	# max delay before canceling queries
230
					# when reading streaming WAL;
231
					# -1 allows indefinite delay
232 6195 aaronmk
#wal_receiver_status_interval = 10s	# send replies at least this often
233
					# 0 disables
234
#hot_standby_feedback = off		# send info from standby to prevent
235
					# query conflicts
236 1722 aaronmk
237
238
#------------------------------------------------------------------------------
239
# QUERY TUNING
240
#------------------------------------------------------------------------------
241
242
# - Planner Method Configuration -
243
244
#enable_bitmapscan = on
245
#enable_hashagg = on
246
#enable_hashjoin = on
247
#enable_indexscan = on
248
#enable_material = on
249
#enable_mergejoin = on
250
#enable_nestloop = on
251
#enable_seqscan = on
252
#enable_sort = on
253
#enable_tidscan = on
254
255
# - Planner Cost Constants -
256
257
#seq_page_cost = 1.0			# measured on an arbitrary scale
258
#random_page_cost = 4.0			# same scale as above
259
#cpu_tuple_cost = 0.01			# same scale as above
260
#cpu_index_tuple_cost = 0.005		# same scale as above
261
#cpu_operator_cost = 0.0025		# same scale as above
262
effective_cache_size = 4GB
263
#effective_cache_size = 128MB
264
265
# - Genetic Query Optimizer -
266
267
#geqo = on
268
#geqo_threshold = 12
269
#geqo_effort = 5			# range 1-10
270
#geqo_pool_size = 0			# selects default based on effort
271
#geqo_generations = 0			# selects default based on effort
272
#geqo_selection_bias = 2.0		# range 1.5-2.0
273
#geqo_seed = 0.0			# range 0.0-1.0
274
275
# - Other Planner Options -
276
277
#default_statistics_target = 100	# range 1-10000
278
#constraint_exclusion = partition	# on, off, or partition
279
#cursor_tuple_fraction = 0.1		# range 0.0-1.0
280
#from_collapse_limit = 8
281 6195 aaronmk
#join_collapse_limit = 8		# 1 disables collapsing of explicit
282 1722 aaronmk
					# JOIN clauses
283
284
285
#------------------------------------------------------------------------------
286
# ERROR REPORTING AND LOGGING
287
#------------------------------------------------------------------------------
288
289
# - Where to Log -
290
291
#log_destination = 'stderr'		# Valid values are combinations of
292
					# stderr, csvlog, syslog, and eventlog,
293
					# depending on platform.  csvlog
294
					# requires logging_collector to be on.
295
296
# This is used when logging to stderr:
297
#logging_collector = off		# Enable capturing of stderr and csvlog
298
					# into log files. Required to be on for
299
					# csvlogs.
300
					# (change requires restart)
301
302
# These are only used if logging_collector is on:
303
#log_directory = 'pg_log'		# directory where log files are written,
304
					# can be absolute or relative to PGDATA
305
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
306
					# can include strftime() escapes
307 6195 aaronmk
#log_file_mode = 0600			# creation mode for log files,
308
					# begin with 0 to use octal notation
309
#log_truncate_on_rotation = off		# If on, an existing log file with the
310 1722 aaronmk
					# same name as the new log file will be
311
					# truncated rather than appended to.
312
					# But such truncation only occurs on
313
					# time-driven rotation, not on restarts
314
					# or size-driven rotation.  Default is
315
					# off, meaning append to existing files
316
					# in all cases.
317
#log_rotation_age = 1d			# Automatic rotation of logfiles will
318
					# happen after that time.  0 disables.
319 6195 aaronmk
#log_rotation_size = 10MB		# Automatic rotation of logfiles will
320 1722 aaronmk
					# happen after that much log output.
321
					# 0 disables.
322
323
# These are relevant when logging to syslog:
324
#syslog_facility = 'LOCAL0'
325
#syslog_ident = 'postgres'
326
327
#silent_mode = off			# Run server silently.
328
					# DO NOT USE without syslog or
329
					# logging_collector
330
					# (change requires restart)
331
332
333
# - When to Log -
334
335
#client_min_messages = notice		# values in order of decreasing detail:
336
					#   debug5
337
					#   debug4
338
					#   debug3
339
					#   debug2
340
					#   debug1
341
					#   log
342
					#   notice
343
					#   warning
344
					#   error
345
346
#log_min_messages = warning		# values in order of decreasing detail:
347
					#   debug5
348
					#   debug4
349
					#   debug3
350
					#   debug2
351
					#   debug1
352
					#   info
353
					#   notice
354
					#   warning
355
					#   error
356
					#   log
357
					#   fatal
358
					#   panic
359
360
#log_min_error_statement = error	# values in order of decreasing detail:
361
				 	#   debug5
362
					#   debug4
363
					#   debug3
364
					#   debug2
365
					#   debug1
366
				 	#   info
367
					#   notice
368
					#   warning
369
					#   error
370
					#   log
371
					#   fatal
372
					#   panic (effectively off)
373
374
#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
375
					# and their durations, > 0 logs only
376
					# statements running at least this number
377
					# of milliseconds
378
379
380
# - What to Log -
381
382
#debug_print_parse = off
383
#debug_print_rewritten = off
384
#debug_print_plan = off
385
#debug_pretty_print = on
386
#log_checkpoints = off
387
#log_connections = off
388
#log_disconnections = off
389
#log_duration = off
390
#log_error_verbosity = default		# terse, default, or verbose messages
391
#log_hostname = off
392
#log_line_prefix = ''			# special values:
393
					#   %a = application name
394
					#   %u = user name
395
					#   %d = database name
396
					#   %r = remote host and port
397
					#   %h = remote host
398
					#   %p = process ID
399
					#   %t = timestamp without milliseconds
400
					#   %m = timestamp with milliseconds
401
					#   %i = command tag
402
					#   %e = SQL state
403
					#   %c = session ID
404
					#   %l = session line number
405
					#   %s = session start timestamp
406
					#   %v = virtual transaction ID
407
					#   %x = transaction ID (0 if none)
408
					#   %q = stop here in non-session
409
					#        processes
410
					#   %% = '%'
411
					# e.g. '<%u%%%d> '
412
#log_lock_waits = off			# log lock waits >= deadlock_timeout
413
#log_statement = 'none'			# none, ddl, mod, all
414
#log_temp_files = -1			# log temporary files equal or larger
415
					# than the specified size in kilobytes;
416
					# -1 disables, 0 logs all temp files
417 6195 aaronmk
#log_timezone = '(defaults to server environment setting)'
418 1722 aaronmk
419
420
#------------------------------------------------------------------------------
421
# RUNTIME STATISTICS
422
#------------------------------------------------------------------------------
423
424
# - Query/Index Statistics Collector -
425
426
#track_activities = on
427
#track_counts = on
428
#track_functions = none			# none, pl, all
429
#track_activity_query_size = 1024 	# (change requires restart)
430
#update_process_title = on
431
#stats_temp_directory = 'pg_stat_tmp'
432
433
434
# - Statistics Monitoring -
435
436
#log_parser_stats = off
437
#log_planner_stats = off
438
#log_executor_stats = off
439
#log_statement_stats = off
440
441
442
#------------------------------------------------------------------------------
443
# AUTOVACUUM PARAMETERS
444
#------------------------------------------------------------------------------
445
446 6195 aaronmk
#autovacuum = on			# Enable autovacuum subprocess?  'on'
447 1722 aaronmk
					# requires track_counts to also be on.
448 10830 aaronmk
log_autovacuum_min_duration = 0	# -1 disables, 0 logs all actions and
449 1722 aaronmk
					# their durations, > 0 logs only
450
					# actions running at least this number
451
					# of milliseconds.
452
#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
453
					# (change requires restart)
454
#autovacuum_naptime = 1min		# time between autovacuum runs
455
#autovacuum_vacuum_threshold = 50	# min number of row updates before
456
					# vacuum
457 6195 aaronmk
#autovacuum_analyze_threshold = 50	# min number of row updates before
458 1722 aaronmk
					# analyze
459
#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
460
#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
461
#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
462
					# (change requires restart)
463
#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
464
					# autovacuum, in milliseconds;
465
					# -1 means use vacuum_cost_delay
466
#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
467
					# autovacuum, -1 means use
468
					# vacuum_cost_limit
469
470
471
#------------------------------------------------------------------------------
472
# CLIENT CONNECTION DEFAULTS
473
#------------------------------------------------------------------------------
474
475
# - Statement Behavior -
476
477
#search_path = '"$user",public'		# schema names
478
#default_tablespace = ''		# a tablespace name, '' uses the default
479
#temp_tablespaces = ''			# a list of tablespace names, '' uses
480
					# only default tablespace
481
#check_function_bodies = on
482
#default_transaction_isolation = 'read committed'
483
#default_transaction_read_only = off
484 6195 aaronmk
#default_transaction_deferrable = off
485 1722 aaronmk
#session_replication_role = 'origin'
486
#statement_timeout = 0			# in milliseconds, 0 is disabled
487
#vacuum_freeze_min_age = 50000000
488
#vacuum_freeze_table_age = 150000000
489
#bytea_output = 'hex'			# hex, escape
490
#xmlbinary = 'base64'
491
#xmloption = 'content'
492
493
# - Locale and Formatting -
494
495
datestyle = 'iso, mdy'
496
#intervalstyle = 'postgres'
497 6195 aaronmk
#timezone = '(defaults to server environment setting)'
498 1722 aaronmk
#timezone_abbreviations = 'Default'     # Select the set of available time zone
499
					# abbreviations.  Currently, there are
500
					#   Default
501
					#   Australia
502
					#   India
503
					# You can create your own file in
504
					# share/timezonesets/.
505
#extra_float_digits = 0			# min -15, max 3
506
#client_encoding = sql_ascii		# actually, defaults to database
507
					# encoding
508
509
# These settings are initialized by initdb, but they can be changed.
510
lc_messages = 'en_US.UTF-8'			# locale for system error message
511
					# strings
512
lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
513
lc_numeric = 'en_US.UTF-8'			# locale for number formatting
514
lc_time = 'en_US.UTF-8'				# locale for time formatting
515
516
# default configuration for text search
517
default_text_search_config = 'pg_catalog.english'
518
519
# - Other Defaults -
520
521
#dynamic_library_path = '$libdir'
522
#local_preload_libraries = ''
523
524
525
#------------------------------------------------------------------------------
526
# LOCK MANAGEMENT
527
#------------------------------------------------------------------------------
528
529
#deadlock_timeout = 1s
530
#max_locks_per_transaction = 64		# min 10
531
					# (change requires restart)
532
# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
533
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
534
# lock table slots.
535 6195 aaronmk
#max_pred_locks_per_transaction = 64	# min 10
536
					# (change requires restart)
537 1722 aaronmk
538
#------------------------------------------------------------------------------
539
# VERSION/PLATFORM COMPATIBILITY
540
#------------------------------------------------------------------------------
541
542
# - Previous PostgreSQL Versions -
543
544
#array_nulls = on
545
#backslash_quote = safe_encoding	# on, off, or safe_encoding
546
#default_with_oids = off
547
#escape_string_warning = on
548
#lo_compat_privileges = off
549 6195 aaronmk
#quote_all_identifiers = off
550 1722 aaronmk
#sql_inheritance = on
551 6195 aaronmk
#standard_conforming_strings = on
552 1722 aaronmk
#synchronize_seqscans = on
553
554
# - Other Platforms and Clients -
555
556
#transform_null_equals = off
557
558
559
#------------------------------------------------------------------------------
560 6195 aaronmk
# ERROR HANDLING
561
#------------------------------------------------------------------------------
562
563
#exit_on_error = off				# terminate session on any error?
564
#restart_after_crash = on			# reinitialize after backend crash?
565
566
567
#------------------------------------------------------------------------------
568 1722 aaronmk
# CUSTOMIZED OPTIONS
569
#------------------------------------------------------------------------------
570
571
#custom_variable_classes = ''		# list of custom variable class names