Project

General

Profile

1 1583 aaronmk
# -----------------------------
2
# PostgreSQL configuration file
3
# -----------------------------
4
#
5
# This file consists of lines of the form:
6
#
7
#   name = value
8
#
9
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
10
# "#" anywhere on a line.  The complete list of parameter names and allowed
11
# values can be found in the PostgreSQL documentation.
12
#
13
# The commented-out settings shown in this file represent the default values.
14
# Re-commenting a setting is NOT sufficient to revert it to the default value;
15
# you need to reload the server.
16
#
17
# This file is read on server startup and when the server receives a SIGHUP
18
# signal.  If you edit the file on a running system, you have to SIGHUP the
19
# server for the changes to take effect, or use "pg_ctl reload".  Some
20
# parameters, which are marked below, require a server shutdown and restart to
21
# take effect.
22
#
23
# Any parameter can also be given as a command-line option to the server, e.g.,
24
# "postgres -c log_connections=on".  Some parameters can be changed at run time
25
# with the "SET" SQL command.
26
#
27
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
28
#                MB = megabytes                     s   = seconds
29
#                GB = gigabytes                     min = minutes
30
#                                                   h   = hours
31
#                                                   d   = days
32
33
34
#------------------------------------------------------------------------------
35
# FILE LOCATIONS
36
#------------------------------------------------------------------------------
37
38
# The default values of these variables are driven from the -D command-line
39
# option or PGDATA environment variable, represented here as ConfigDir.
40
41 11670 aaronmk
data_directory = '/var/lib/postgresql/9.3/main'		# use data in another directory
42 1583 aaronmk
					# (change requires restart)
43 11670 aaronmk
hba_file = '/etc/postgresql/9.3/main/pg_hba.conf'	# host-based authentication file
44 1583 aaronmk
					# (change requires restart)
45 11670 aaronmk
ident_file = '/etc/postgresql/9.3/main/pg_ident.conf'	# ident configuration file
46 1583 aaronmk
					# (change requires restart)
47
48
# If external_pid_file is not explicitly set, no extra PID file is written.
49 11670 aaronmk
external_pid_file = '/var/run/postgresql/9.3-main.pid'			# write an extra PID file
50 1583 aaronmk
					# (change requires restart)
51
52
53
#------------------------------------------------------------------------------
54
# CONNECTIONS AND AUTHENTICATION
55
#------------------------------------------------------------------------------
56
57
# - Connection Settings -
58
59 11670 aaronmk
listen_addresses = '*'		# what IP address(es) to listen on;
60
#listen_addresses = 'localhost'		# what IP address(es) to listen on;
61 1583 aaronmk
					# comma-separated list of addresses;
62 11670 aaronmk
					# defaults to 'localhost'; use '*' for all
63 1583 aaronmk
					# (change requires restart)
64
port = 5432				# (change requires restart)
65
max_connections = 100			# (change requires restart)
66 11670 aaronmk
# Note:  Increasing max_connections costs ~400 bytes of shared memory per
67 1583 aaronmk
# connection slot, plus lock space (see max_locks_per_transaction).
68
#superuser_reserved_connections = 3	# (change requires restart)
69 11670 aaronmk
unix_socket_directories = '/var/run/postgresql'	# comma-separated list of directories
70
					# (change requires restart)
71 1583 aaronmk
#unix_socket_group = ''			# (change requires restart)
72
#unix_socket_permissions = 0777		# begin with 0 to use octal notation
73
					# (change requires restart)
74 11670 aaronmk
#bonjour = off				# advertise server via Bonjour
75
					# (change requires restart)
76 1583 aaronmk
#bonjour_name = ''			# defaults to the computer name
77
					# (change requires restart)
78
79
# - Security and Authentication -
80
81
#authentication_timeout = 1min		# 1s-600s
82
ssl = true				# (change requires restart)
83 11670 aaronmk
#ssl_ciphers = 'DEFAULT:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
84 1583 aaronmk
					# (change requires restart)
85
#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
86 11670 aaronmk
ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'		# (change requires restart)
87
ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'		# (change requires restart)
88
#ssl_ca_file = ''			# (change requires restart)
89
#ssl_crl_file = ''			# (change requires restart)
90 1583 aaronmk
#password_encryption = on
91
#db_user_namespace = off
92
93
# Kerberos and GSSAPI
94
#krb_server_keyfile = ''
95
#krb_srvname = 'postgres'		# (Kerberos only)
96
#krb_caseins_users = off
97
98
# - TCP Keepalives -
99
# see "man 7 tcp" for details
100
101
#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
102
					# 0 selects the system default
103
#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
104
					# 0 selects the system default
105
#tcp_keepalives_count = 0		# TCP_KEEPCNT;
106
					# 0 selects the system default
107
108
109
#------------------------------------------------------------------------------
110
# RESOURCE USAGE (except WAL)
111
#------------------------------------------------------------------------------
112
113
# - Memory -
114
115 6502 aaronmk
# Must be less than total memory and less than ~95% of SHMMAX
116 8609 aaronmk
# 32-bit Linux (e.g. Ubuntu VM) may support less:
117
# http://www.postgresql.org/message-id/27470.1323837026@sss.pgh.pa.us
118 8611 aaronmk
shared_buffers = 2700MB			# min 128kB
119 11670 aaronmk
#shared_buffers = 128MB			# min 128kB
120 1583 aaronmk
					# (change requires restart)
121
#temp_buffers = 8MB			# min 800kB
122
#max_prepared_transactions = 0		# zero disables the feature
123
					# (change requires restart)
124
# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
125
# per transaction slot, plus lock space (see max_locks_per_transaction).
126
# It is not advisable to set max_prepared_transactions nonzero unless you
127
# actively intend to use prepared transactions.
128 11797 aaronmk
# this is *multiplied* by max_connections
129
# i.e. 256 MB * 100 = *26 GB*, which approaches total memory (32 GB)
130 1654 aaronmk
work_mem = 256MB				# min 64kB
131 1583 aaronmk
#work_mem = 1MB				# min 64kB
132 1654 aaronmk
maintenance_work_mem = 256MB		# min 1MB
133 1583 aaronmk
#maintenance_work_mem = 16MB		# min 1MB
134
#max_stack_depth = 2MB			# min 100kB
135
136 11670 aaronmk
# - Disk -
137
138
#temp_file_limit = -1			# limits per-session temp file space
139
					# in kB, or -1 for no limit
140
141 1583 aaronmk
# - Kernel Resource Usage -
142
143
#max_files_per_process = 1000		# min 25
144
					# (change requires restart)
145
#shared_preload_libraries = ''		# (change requires restart)
146
147
# - Cost-Based Vacuum Delay -
148
149 11670 aaronmk
#vacuum_cost_delay = 0			# 0-100 milliseconds
150 1583 aaronmk
#vacuum_cost_page_hit = 1		# 0-10000 credits
151
#vacuum_cost_page_miss = 10		# 0-10000 credits
152
#vacuum_cost_page_dirty = 20		# 0-10000 credits
153
#vacuum_cost_limit = 200		# 1-10000 credits
154
155
# - Background Writer -
156
157
#bgwriter_delay = 200ms			# 10-10000ms between rounds
158
#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
159
#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
160
161
# - Asynchronous Behavior -
162
163 11670 aaronmk
#effective_io_concurrency = 1		# 1-1000; 0 disables prefetching
164 1583 aaronmk
165
166
#------------------------------------------------------------------------------
167
# WRITE AHEAD LOG
168
#------------------------------------------------------------------------------
169
170
# - Settings -
171
172 11670 aaronmk
#wal_level = minimal			# minimal, archive, or hot_standby
173
					# (change requires restart)
174 1583 aaronmk
#fsync = on				# turns forced synchronization on or off
175 1654 aaronmk
##### WARNING: Switching this off may cause data loss.
176
# It is used to improve performance with frequent commits. Each datasource makes
177
# ~10 commits/sec (which will hopefully increase after optimization), and there
178
# can be 10+ datasources running simultaneously, so the 100 commit/sec limit may
179
# be exceeded. See synchronous_commit at
180
# <http://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server#synchronous_commit>
181
#####
182
synchronous_commit = off		# immediate fsync at commit
183 11670 aaronmk
#synchronous_commit = on		# synchronization level;
184
					# off, local, remote_write, or on
185
#wal_sync_method = fsync		# the default is the first option
186 1583 aaronmk
					# supported by the operating system:
187
					#   open_datasync
188 11670 aaronmk
					#   fdatasync (default on Linux)
189 1583 aaronmk
					#   fsync
190
					#   fsync_writethrough
191
					#   open_sync
192
#full_page_writes = on			# recover from partial page writes
193 11670 aaronmk
#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
194 1583 aaronmk
					# (change requires restart)
195
#wal_writer_delay = 200ms		# 1-10000 milliseconds
196
197
#commit_delay = 0			# range 0-100000, in microseconds
198
#commit_siblings = 5			# range 1-1000
199
200
# - Checkpoints -
201
202 1721 aaronmk
checkpoint_segments = 32		# in logfile segments, min 1, 16MB each
203 1583 aaronmk
#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
204
#checkpoint_timeout = 5min		# range 30s-1h
205 1721 aaronmk
checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
206 1583 aaronmk
#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
207
#checkpoint_warning = 30s		# 0 disables
208
209
# - Archiving -
210
211
#archive_mode = off		# allows archiving to be done
212
				# (change requires restart)
213
#archive_command = ''		# command to use to archive a logfile segment
214 11670 aaronmk
				# placeholders: %p = path of file to archive
215
				#               %f = file name only
216
				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
217 1583 aaronmk
#archive_timeout = 0		# force a logfile segment switch after this
218
				# number of seconds; 0 disables
219
220
221
#------------------------------------------------------------------------------
222 11670 aaronmk
# REPLICATION
223
#------------------------------------------------------------------------------
224
225
# - Sending Server(s) -
226
227
# Set these on the master and on any standby that will send replication data.
228
229
#max_wal_senders = 0		# max number of walsender processes
230
				# (change requires restart)
231
#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
232
#wal_sender_timeout = 60s	# in milliseconds; 0 disables
233
234
# - Master Server -
235
236
# These settings are ignored on a standby server.
237
238
#synchronous_standby_names = ''	# standby servers that provide sync rep
239
				# comma-separated list of application_name
240
				# from standby(s); '*' = all
241
#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
242
243
# - Standby Servers -
244
245
# These settings are ignored on a master server.
246
247
#hot_standby = off			# "on" allows queries during recovery
248
					# (change requires restart)
249
#max_standby_archive_delay = 30s	# max delay before canceling queries
250
					# when reading WAL from archive;
251
					# -1 allows indefinite delay
252
#max_standby_streaming_delay = 30s	# max delay before canceling queries
253
					# when reading streaming WAL;
254
					# -1 allows indefinite delay
255
#wal_receiver_status_interval = 10s	# send replies at least this often
256
					# 0 disables
257
#hot_standby_feedback = off		# send info from standby to prevent
258
					# query conflicts
259
#wal_receiver_timeout = 60s		# time that receiver waits for
260
					# communication from master
261
					# in milliseconds; 0 disables
262
263
264
#------------------------------------------------------------------------------
265 1583 aaronmk
# QUERY TUNING
266
#------------------------------------------------------------------------------
267
268
# - Planner Method Configuration -
269
270
#enable_bitmapscan = on
271
#enable_hashagg = on
272
#enable_hashjoin = on
273
#enable_indexscan = on
274 11670 aaronmk
#enable_indexonlyscan = on
275
#enable_material = on
276 1583 aaronmk
#enable_mergejoin = on
277
#enable_nestloop = on
278
#enable_seqscan = on
279
#enable_sort = on
280
#enable_tidscan = on
281
282
# - Planner Cost Constants -
283
284
#seq_page_cost = 1.0			# measured on an arbitrary scale
285
#random_page_cost = 4.0			# same scale as above
286
#cpu_tuple_cost = 0.01			# same scale as above
287
#cpu_index_tuple_cost = 0.005		# same scale as above
288
#cpu_operator_cost = 0.0025		# same scale as above
289 1654 aaronmk
effective_cache_size = 12GB
290 1583 aaronmk
#effective_cache_size = 128MB
291
292
# - Genetic Query Optimizer -
293
294
#geqo = on
295
#geqo_threshold = 12
296
#geqo_effort = 5			# range 1-10
297
#geqo_pool_size = 0			# selects default based on effort
298
#geqo_generations = 0			# selects default based on effort
299
#geqo_selection_bias = 2.0		# range 1.5-2.0
300 11670 aaronmk
#geqo_seed = 0.0			# range 0.0-1.0
301 1583 aaronmk
302
# - Other Planner Options -
303
304
#default_statistics_target = 100	# range 1-10000
305
#constraint_exclusion = partition	# on, off, or partition
306
#cursor_tuple_fraction = 0.1		# range 0.0-1.0
307
#from_collapse_limit = 8
308 11670 aaronmk
#join_collapse_limit = 8		# 1 disables collapsing of explicit
309 1583 aaronmk
					# JOIN clauses
310
311
312
#------------------------------------------------------------------------------
313
# ERROR REPORTING AND LOGGING
314
#------------------------------------------------------------------------------
315
316
# - Where to Log -
317
318
#log_destination = 'stderr'		# Valid values are combinations of
319 11670 aaronmk
					# stderr, csvlog, syslog, and eventlog,
320 1583 aaronmk
					# depending on platform.  csvlog
321
					# requires logging_collector to be on.
322
323
# This is used when logging to stderr:
324 6298 aaronmk
logging_collector = on
325 1583 aaronmk
#logging_collector = off		# Enable capturing of stderr and csvlog
326
					# into log files. Required to be on for
327
					# csvlogs.
328
					# (change requires restart)
329
330
# These are only used if logging_collector is on:
331
#log_directory = 'pg_log'		# directory where log files are written,
332
					# can be absolute or relative to PGDATA
333
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
334
					# can include strftime() escapes
335 11670 aaronmk
#log_file_mode = 0600			# creation mode for log files,
336
					# begin with 0 to use octal notation
337
#log_truncate_on_rotation = off		# If on, an existing log file with the
338 1583 aaronmk
					# same name as the new log file will be
339
					# truncated rather than appended to.
340
					# But such truncation only occurs on
341
					# time-driven rotation, not on restarts
342
					# or size-driven rotation.  Default is
343
					# off, meaning append to existing files
344
					# in all cases.
345
#log_rotation_age = 1d			# Automatic rotation of logfiles will
346
					# happen after that time.  0 disables.
347 11670 aaronmk
#log_rotation_size = 10MB		# Automatic rotation of logfiles will
348 1583 aaronmk
					# happen after that much log output.
349
					# 0 disables.
350
351
# These are relevant when logging to syslog:
352
#syslog_facility = 'LOCAL0'
353
#syslog_ident = 'postgres'
354
355 11670 aaronmk
# This is only relevant when logging to eventlog (win32):
356
#event_source = 'PostgreSQL'
357 1583 aaronmk
358
# - When to Log -
359
360
#client_min_messages = notice		# values in order of decreasing detail:
361
					#   debug5
362
					#   debug4
363
					#   debug3
364
					#   debug2
365
					#   debug1
366
					#   log
367
					#   notice
368
					#   warning
369
					#   error
370
371
#log_min_messages = warning		# values in order of decreasing detail:
372
					#   debug5
373
					#   debug4
374
					#   debug3
375
					#   debug2
376
					#   debug1
377
					#   info
378
					#   notice
379
					#   warning
380
					#   error
381
					#   log
382
					#   fatal
383
					#   panic
384
385
#log_min_error_statement = error	# values in order of decreasing detail:
386
				 	#   debug5
387
					#   debug4
388
					#   debug3
389
					#   debug2
390
					#   debug1
391
				 	#   info
392
					#   notice
393
					#   warning
394
					#   error
395
					#   log
396
					#   fatal
397
					#   panic (effectively off)
398
399
#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
400
					# and their durations, > 0 logs only
401
					# statements running at least this number
402
					# of milliseconds
403
404
405
# - What to Log -
406
407
#debug_print_parse = off
408
#debug_print_rewritten = off
409
#debug_print_plan = off
410
#debug_pretty_print = on
411
#log_checkpoints = off
412
#log_connections = off
413
#log_disconnections = off
414
#log_duration = off
415 11670 aaronmk
#log_error_verbosity = default		# terse, default, or verbose messages
416 1583 aaronmk
#log_hostname = off
417
log_line_prefix = '%t '			# special values:
418 11670 aaronmk
					#   %a = application name
419 1583 aaronmk
					#   %u = user name
420
					#   %d = database name
421
					#   %r = remote host and port
422
					#   %h = remote host
423
					#   %p = process ID
424
					#   %t = timestamp without milliseconds
425
					#   %m = timestamp with milliseconds
426
					#   %i = command tag
427 11670 aaronmk
					#   %e = SQL state
428 1583 aaronmk
					#   %c = session ID
429
					#   %l = session line number
430
					#   %s = session start timestamp
431
					#   %v = virtual transaction ID
432
					#   %x = transaction ID (0 if none)
433
					#   %q = stop here in non-session
434
					#        processes
435
					#   %% = '%'
436
					# e.g. '<%u%%%d> '
437
#log_lock_waits = off			# log lock waits >= deadlock_timeout
438
#log_statement = 'none'			# none, ddl, mod, all
439
#log_temp_files = -1			# log temporary files equal or larger
440
					# than the specified size in kilobytes;
441
					# -1 disables, 0 logs all temp files
442 11670 aaronmk
log_timezone = 'localtime'
443 1583 aaronmk
444
445
#------------------------------------------------------------------------------
446
# RUNTIME STATISTICS
447
#------------------------------------------------------------------------------
448
449
# - Query/Index Statistics Collector -
450
451
#track_activities = on
452
#track_counts = on
453 11670 aaronmk
#track_io_timing = off
454 1583 aaronmk
#track_functions = none			# none, pl, all
455 11670 aaronmk
#track_activity_query_size = 1024 	# (change requires restart)
456 1583 aaronmk
#update_process_title = on
457
#stats_temp_directory = 'pg_stat_tmp'
458
459
460
# - Statistics Monitoring -
461
462
#log_parser_stats = off
463
#log_planner_stats = off
464
#log_executor_stats = off
465
#log_statement_stats = off
466
467
468
#------------------------------------------------------------------------------
469
# AUTOVACUUM PARAMETERS
470
#------------------------------------------------------------------------------
471
472 11670 aaronmk
#autovacuum = on			# Enable autovacuum subprocess?  'on'
473 1583 aaronmk
					# requires track_counts to also be on.
474 10830 aaronmk
log_autovacuum_min_duration = 0	# -1 disables, 0 logs all actions and
475 11670 aaronmk
#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
476 1583 aaronmk
					# their durations, > 0 logs only
477
					# actions running at least this number
478
					# of milliseconds.
479
#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
480 11670 aaronmk
					# (change requires restart)
481 1583 aaronmk
#autovacuum_naptime = 1min		# time between autovacuum runs
482
#autovacuum_vacuum_threshold = 50	# min number of row updates before
483
					# vacuum
484 11670 aaronmk
#autovacuum_analyze_threshold = 50	# min number of row updates before
485 1583 aaronmk
					# analyze
486
#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
487
#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
488
#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
489
					# (change requires restart)
490
#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
491
					# autovacuum, in milliseconds;
492
					# -1 means use vacuum_cost_delay
493
#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
494
					# autovacuum, -1 means use
495
					# vacuum_cost_limit
496
497
498
#------------------------------------------------------------------------------
499
# CLIENT CONNECTION DEFAULTS
500
#------------------------------------------------------------------------------
501
502
# - Statement Behavior -
503
504
#search_path = '"$user",public'		# schema names
505
#default_tablespace = ''		# a tablespace name, '' uses the default
506
#temp_tablespaces = ''			# a list of tablespace names, '' uses
507
					# only default tablespace
508
#check_function_bodies = on
509
#default_transaction_isolation = 'read committed'
510
#default_transaction_read_only = off
511 11670 aaronmk
#default_transaction_deferrable = off
512 1583 aaronmk
#session_replication_role = 'origin'
513
#statement_timeout = 0			# in milliseconds, 0 is disabled
514 11670 aaronmk
#lock_timeout = 0			# in milliseconds, 0 is disabled
515 1583 aaronmk
#vacuum_freeze_min_age = 50000000
516
#vacuum_freeze_table_age = 150000000
517 11670 aaronmk
#bytea_output = 'hex'			# hex, escape
518 1583 aaronmk
#xmlbinary = 'base64'
519
#xmloption = 'content'
520
521
# - Locale and Formatting -
522
523
datestyle = 'iso, mdy'
524
#intervalstyle = 'postgres'
525 11670 aaronmk
timezone = 'localtime'
526 1583 aaronmk
#timezone_abbreviations = 'Default'     # Select the set of available time zone
527
					# abbreviations.  Currently, there are
528
					#   Default
529
					#   Australia
530
					#   India
531
					# You can create your own file in
532
					# share/timezonesets/.
533 11670 aaronmk
#extra_float_digits = 0			# min -15, max 3
534 1583 aaronmk
#client_encoding = sql_ascii		# actually, defaults to database
535
					# encoding
536
537
# These settings are initialized by initdb, but they can be changed.
538
lc_messages = 'en_US.UTF-8'			# locale for system error message
539
					# strings
540
lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
541
lc_numeric = 'en_US.UTF-8'			# locale for number formatting
542
lc_time = 'en_US.UTF-8'				# locale for time formatting
543
544
# default configuration for text search
545
default_text_search_config = 'pg_catalog.english'
546
547
# - Other Defaults -
548
549
#dynamic_library_path = '$libdir'
550
#local_preload_libraries = ''
551
552
553
#------------------------------------------------------------------------------
554
# LOCK MANAGEMENT
555
#------------------------------------------------------------------------------
556
557
#deadlock_timeout = 1s
558
#max_locks_per_transaction = 64		# min 10
559
					# (change requires restart)
560
# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
561
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
562
# lock table slots.
563 11670 aaronmk
#max_pred_locks_per_transaction = 64	# min 10
564
					# (change requires restart)
565 1583 aaronmk
566
567
#------------------------------------------------------------------------------
568
# VERSION/PLATFORM COMPATIBILITY
569
#------------------------------------------------------------------------------
570
571
# - Previous PostgreSQL Versions -
572
573
#array_nulls = on
574
#backslash_quote = safe_encoding	# on, off, or safe_encoding
575
#default_with_oids = off
576
#escape_string_warning = on
577 11670 aaronmk
#lo_compat_privileges = off
578
#quote_all_identifiers = off
579 1583 aaronmk
#sql_inheritance = on
580 11670 aaronmk
#standard_conforming_strings = on
581 1583 aaronmk
#synchronize_seqscans = on
582
583
# - Other Platforms and Clients -
584
585
#transform_null_equals = off
586
587
588
#------------------------------------------------------------------------------
589 11670 aaronmk
# ERROR HANDLING
590
#------------------------------------------------------------------------------
591
592
#exit_on_error = off			# terminate session on any error?
593
#restart_after_crash = on		# reinitialize after backend crash?
594
595
596
#------------------------------------------------------------------------------
597
# CONFIG FILE INCLUDES
598
#------------------------------------------------------------------------------
599
600
# These options allow settings to be loaded from files other than the
601
# default postgresql.conf.
602
603
#include_dir = 'conf.d'			# include files ending in '.conf' from
604
					# directory 'conf.d'
605
#include_if_exists = 'exists.conf'	# include file only if it exists
606
#include = 'special.conf'		# include file
607
608
609
#------------------------------------------------------------------------------
610 1583 aaronmk
# CUSTOMIZED OPTIONS
611
#------------------------------------------------------------------------------
612
613 11670 aaronmk
# Add settings for extensions here