Project

General

Profile

1
# -----------------------------
2
# PostgreSQL configuration file
3
# -----------------------------
4
#
5
# This file consists of lines of the form:
6
#
7
#   name = value
8
#
9
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
10
# "#" anywhere on a line.  The complete list of parameter names and allowed
11
# values can be found in the PostgreSQL documentation.
12
#
13
# The commented-out settings shown in this file represent the default values.
14
# Re-commenting a setting is NOT sufficient to revert it to the default value;
15
# you need to reload the server.
16
#
17
# This file is read on server startup and when the server receives a SIGHUP
18
# signal.  If you edit the file on a running system, you have to SIGHUP the
19
# server for the changes to take effect, or use "pg_ctl reload".  Some
20
# parameters, which are marked below, require a server shutdown and restart to
21
# take effect.
22
#
23
# Any parameter can also be given as a command-line option to the server, e.g.,
24
# "postgres -c log_connections=on".  Some parameters can be changed at run time
25
# with the "SET" SQL command.
26
#
27
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
28
#                MB = megabytes                     s   = seconds
29
#                GB = gigabytes                     min = minutes
30
#                                                   h   = hours
31
#                                                   d   = days
32

    
33

    
34
#------------------------------------------------------------------------------
35
# FILE LOCATIONS
36
#------------------------------------------------------------------------------
37

    
38
# The default values of these variables are driven from the -D command-line
39
# option or PGDATA environment variable, represented here as ConfigDir.
40

    
41
#data_directory = 'ConfigDir'		# use data in another directory
42
					# (change requires restart)
43
#hba_file = 'ConfigDir/pg_hba.conf'	# host-based authentication file
44
					# (change requires restart)
45
#ident_file = 'ConfigDir/pg_ident.conf'	# ident configuration file
46
					# (change requires restart)
47

    
48
# If external_pid_file is not explicitly set, no extra PID file is written.
49
#external_pid_file = ''			# write an extra PID file
50
					# (change requires restart)
51

    
52

    
53
#------------------------------------------------------------------------------
54
# CONNECTIONS AND AUTHENTICATION
55
#------------------------------------------------------------------------------
56

    
57
# - Connection Settings -
58

    
59
listen_addresses = '*'		# what IP address(es) to listen on;
60
					# comma-separated list of addresses;
61
					# defaults to 'localhost'; use '*' for all
62
					# (change requires restart)
63
port = 5432				# (change requires restart)
64
max_connections = 100			# (change requires restart)
65
# Note:  Increasing max_connections costs ~400 bytes of shared memory per
66
# connection slot, plus lock space (see max_locks_per_transaction).
67
#superuser_reserved_connections = 3	# (change requires restart)
68
unix_socket_directories = '/tmp'	# comma-separated list of directories
69
					# (change requires restart)
70
#unix_socket_group = ''			# (change requires restart)
71
#unix_socket_permissions = 0777		# begin with 0 to use octal notation
72
					# (change requires restart)
73
#bonjour = off				# advertise server via Bonjour
74
					# (change requires restart)
75
#bonjour_name = ''			# defaults to the computer name
76
					# (change requires restart)
77

    
78
# - Security and Authentication -
79

    
80
#authentication_timeout = 1min		# 1s-600s
81
#ssl = off				# (change requires restart)
82
#ssl_ciphers = 'DEFAULT:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
83
					# (change requires restart)
84
#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
85
#ssl_cert_file = 'server.crt'		# (change requires restart)
86
#ssl_key_file = 'server.key'		# (change requires restart)
87
#ssl_ca_file = ''			# (change requires restart)
88
#ssl_crl_file = ''			# (change requires restart)
89
#password_encryption = on
90
#db_user_namespace = off
91

    
92
# Kerberos and GSSAPI
93
#krb_server_keyfile = ''
94
#krb_srvname = 'postgres'		# (Kerberos only)
95
#krb_caseins_users = off
96

    
97
# - TCP Keepalives -
98
# see "man 7 tcp" for details
99

    
100
#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
101
					# 0 selects the system default
102
#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
103
					# 0 selects the system default
104
#tcp_keepalives_count = 0		# TCP_KEEPCNT;
105
					# 0 selects the system default
106

    
107

    
108
#------------------------------------------------------------------------------
109
# RESOURCE USAGE (except WAL)
110
#------------------------------------------------------------------------------
111

    
112
# - Memory -
113

    
114
# Set to slightly less than SHMMAX = 1.4GB
115
shared_buffers = 1400MB			# min 128kB
116
#shared_buffers = 128MB			# min 128kB
117
					# (change requires restart)
118
#temp_buffers = 8MB			# min 800kB
119
#max_prepared_transactions = 0		# zero disables the feature
120
					# (change requires restart)
121
# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
122
# per transaction slot, plus lock space (see max_locks_per_transaction).
123
# It is not advisable to set max_prepared_transactions nonzero unless you
124
# actively intend to use prepared transactions.
125
work_mem = 256MB				# min 64kB
126
#work_mem = 1MB				# min 64kB
127
maintenance_work_mem = 256MB		# min 1MB
128
#maintenance_work_mem = 16MB		# min 1MB
129
#max_stack_depth = 2MB			# min 100kB
130

    
131
# - Disk -
132

    
133
#temp_file_limit = -1			# limits per-session temp file space
134
					# in kB, or -1 for no limit
135

    
136
# - Kernel Resource Usage -
137

    
138
#max_files_per_process = 1000		# min 25
139
					# (change requires restart)
140
#shared_preload_libraries = ''		# (change requires restart)
141

    
142
# - Cost-Based Vacuum Delay -
143

    
144
#vacuum_cost_delay = 0			# 0-100 milliseconds
145
#vacuum_cost_page_hit = 1		# 0-10000 credits
146
#vacuum_cost_page_miss = 10		# 0-10000 credits
147
#vacuum_cost_page_dirty = 20		# 0-10000 credits
148
#vacuum_cost_limit = 200		# 1-10000 credits
149

    
150
# - Background Writer -
151

    
152
#bgwriter_delay = 200ms			# 10-10000ms between rounds
153
#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
154
#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
155

    
156
# - Asynchronous Behavior -
157

    
158
#effective_io_concurrency = 1		# 1-1000; 0 disables prefetching
159

    
160

    
161
#------------------------------------------------------------------------------
162
# WRITE AHEAD LOG
163
#------------------------------------------------------------------------------
164

    
165
# - Settings -
166

    
167
#wal_level = minimal			# minimal, archive, or hot_standby
168
					# (change requires restart)
169
#fsync = on				# turns forced synchronization on or off
170
##### WARNING: Switching this off may cause data loss.
171
# It is used to improve performance with frequent commits. Each datasource makes
172
# ~10 commits/sec (which will hopefully increase after optimization), and there
173
# can be 10+ datasources running simultaneously, so the 100 commit/sec limit may
174
# be exceeded. See synchronous_commit at
175
# <http://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server#synchronous_commit>
176
#####
177
synchronous_commit = off		# immediate fsync at commit
178
#synchronous_commit = on		# synchronization level;
179
					# off, local, remote_write, or on
180
#wal_sync_method = fsync		# the default is the first option
181
					# supported by the operating system:
182
					#   open_datasync
183
					#   fdatasync (default on Linux)
184
					#   fsync
185
					#   fsync_writethrough
186
					#   open_sync
187
#full_page_writes = on			# recover from partial page writes
188
#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
189
					# (change requires restart)
190
#wal_writer_delay = 200ms		# 1-10000 milliseconds
191

    
192
#commit_delay = 0			# range 0-100000, in microseconds
193
#commit_siblings = 5			# range 1-1000
194

    
195
# - Checkpoints -
196

    
197
checkpoint_segments = 32		# in logfile segments, min 1, 16MB each
198
#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
199
checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
200
#checkpoint_timeout = 5min		# range 30s-1h
201
#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
202
#checkpoint_warning = 30s		# 0 disables
203

    
204
# - Archiving -
205

    
206
#archive_mode = off		# allows archiving to be done
207
				# (change requires restart)
208
#archive_command = ''		# command to use to archive a logfile segment
209
				# placeholders: %p = path of file to archive
210
				#               %f = file name only
211
				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
212
#archive_timeout = 0		# force a logfile segment switch after this
213
				# number of seconds; 0 disables
214

    
215

    
216
#------------------------------------------------------------------------------
217
# REPLICATION
218
#------------------------------------------------------------------------------
219

    
220
# - Sending Server(s) -
221

    
222
# Set these on the master and on any standby that will send replication data.
223

    
224
#max_wal_senders = 0		# max number of walsender processes
225
				# (change requires restart)
226
#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
227
#wal_sender_timeout = 60s	# in milliseconds; 0 disables
228

    
229
# - Master Server -
230

    
231
# These settings are ignored on a standby server.
232

    
233
#synchronous_standby_names = ''	# standby servers that provide sync rep
234
				# comma-separated list of application_name
235
				# from standby(s); '*' = all
236
#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
237

    
238
# - Standby Servers -
239

    
240
# These settings are ignored on a master server.
241

    
242
#hot_standby = off			# "on" allows queries during recovery
243
					# (change requires restart)
244
#max_standby_archive_delay = 30s	# max delay before canceling queries
245
					# when reading WAL from archive;
246
					# -1 allows indefinite delay
247
#max_standby_streaming_delay = 30s	# max delay before canceling queries
248
					# when reading streaming WAL;
249
					# -1 allows indefinite delay
250
#wal_receiver_status_interval = 10s	# send replies at least this often
251
					# 0 disables
252
#hot_standby_feedback = off		# send info from standby to prevent
253
					# query conflicts
254
#wal_receiver_timeout = 60s		# time that receiver waits for
255
					# communication from master
256
					# in milliseconds; 0 disables
257

    
258

    
259
#------------------------------------------------------------------------------
260
# QUERY TUNING
261
#------------------------------------------------------------------------------
262

    
263
# - Planner Method Configuration -
264

    
265
#enable_bitmapscan = on
266
#enable_hashagg = on
267
#enable_hashjoin = on
268
#enable_indexscan = on
269
#enable_indexonlyscan = on
270
#enable_material = on
271
#enable_mergejoin = on
272
#enable_nestloop = on
273
#enable_seqscan = on
274
#enable_sort = on
275
#enable_tidscan = on
276

    
277
# - Planner Cost Constants -
278

    
279
#seq_page_cost = 1.0			# measured on an arbitrary scale
280
#random_page_cost = 4.0			# same scale as above
281
#cpu_tuple_cost = 0.01			# same scale as above
282
#cpu_index_tuple_cost = 0.005		# same scale as above
283
#cpu_operator_cost = 0.0025		# same scale as above
284
effective_cache_size = 4GB
285
#effective_cache_size = 128MB
286

    
287
# - Genetic Query Optimizer -
288

    
289
#geqo = on
290
#geqo_threshold = 12
291
#geqo_effort = 5			# range 1-10
292
#geqo_pool_size = 0			# selects default based on effort
293
#geqo_generations = 0			# selects default based on effort
294
#geqo_selection_bias = 2.0		# range 1.5-2.0
295
#geqo_seed = 0.0			# range 0.0-1.0
296

    
297
# - Other Planner Options -
298

    
299
#default_statistics_target = 100	# range 1-10000
300
#constraint_exclusion = partition	# on, off, or partition
301
#cursor_tuple_fraction = 0.1		# range 0.0-1.0
302
#from_collapse_limit = 8
303
#join_collapse_limit = 8		# 1 disables collapsing of explicit
304
					# JOIN clauses
305

    
306

    
307
#------------------------------------------------------------------------------
308
# ERROR REPORTING AND LOGGING
309
#------------------------------------------------------------------------------
310

    
311
# - Where to Log -
312

    
313
log_destination = 'stderr'		# Valid values are combinations of
314
					# stderr, csvlog, syslog, and eventlog,
315
					# depending on platform.  csvlog
316
					# requires logging_collector to be on.
317

    
318
# This is used when logging to stderr:
319
logging_collector = on		# Enable capturing of stderr and csvlog
320
					# into log files. Required to be on for
321
					# csvlogs.
322
					# (change requires restart)
323

    
324
# These are only used if logging_collector is on:
325
#log_directory = 'pg_log'		# directory where log files are written,
326
					# can be absolute or relative to PGDATA
327
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
328
					# can include strftime() escapes
329
#log_file_mode = 0600			# creation mode for log files,
330
					# begin with 0 to use octal notation
331
#log_truncate_on_rotation = off		# If on, an existing log file with the
332
					# same name as the new log file will be
333
					# truncated rather than appended to.
334
					# But such truncation only occurs on
335
					# time-driven rotation, not on restarts
336
					# or size-driven rotation.  Default is
337
					# off, meaning append to existing files
338
					# in all cases.
339
#log_rotation_age = 1d			# Automatic rotation of logfiles will
340
					# happen after that time.  0 disables.
341
#log_rotation_size = 10MB		# Automatic rotation of logfiles will
342
					# happen after that much log output.
343
					# 0 disables.
344

    
345
# These are relevant when logging to syslog:
346
#syslog_facility = 'LOCAL0'
347
#syslog_ident = 'postgres'
348

    
349
# This is only relevant when logging to eventlog (win32):
350
#event_source = 'PostgreSQL'
351

    
352
# - When to Log -
353

    
354
#client_min_messages = notice		# values in order of decreasing detail:
355
					#   debug5
356
					#   debug4
357
					#   debug3
358
					#   debug2
359
					#   debug1
360
					#   log
361
					#   notice
362
					#   warning
363
					#   error
364

    
365
#log_min_messages = warning		# values in order of decreasing detail:
366
					#   debug5
367
					#   debug4
368
					#   debug3
369
					#   debug2
370
					#   debug1
371
					#   info
372
					#   notice
373
					#   warning
374
					#   error
375
					#   log
376
					#   fatal
377
					#   panic
378

    
379
#log_min_error_statement = error	# values in order of decreasing detail:
380
				 	#   debug5
381
					#   debug4
382
					#   debug3
383
					#   debug2
384
					#   debug1
385
				 	#   info
386
					#   notice
387
					#   warning
388
					#   error
389
					#   log
390
					#   fatal
391
					#   panic (effectively off)
392

    
393
#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
394
					# and their durations, > 0 logs only
395
					# statements running at least this number
396
					# of milliseconds
397

    
398

    
399
# - What to Log -
400

    
401
#debug_print_parse = off
402
#debug_print_rewritten = off
403
#debug_print_plan = off
404
#debug_pretty_print = on
405
#log_checkpoints = off
406
#log_connections = off
407
#log_disconnections = off
408
#log_duration = off
409
#log_error_verbosity = default		# terse, default, or verbose messages
410
#log_hostname = off
411
log_line_prefix = '%t '			# special values:
412
					#   %a = application name
413
					#   %u = user name
414
					#   %d = database name
415
					#   %r = remote host and port
416
					#   %h = remote host
417
					#   %p = process ID
418
					#   %t = timestamp without milliseconds
419
					#   %m = timestamp with milliseconds
420
					#   %i = command tag
421
					#   %e = SQL state
422
					#   %c = session ID
423
					#   %l = session line number
424
					#   %s = session start timestamp
425
					#   %v = virtual transaction ID
426
					#   %x = transaction ID (0 if none)
427
					#   %q = stop here in non-session
428
					#        processes
429
					#   %% = '%'
430
					# e.g. '<%u%%%d> '
431
#log_lock_waits = off			# log lock waits >= deadlock_timeout
432
#log_statement = 'none'			# none, ddl, mod, all
433
#log_temp_files = -1			# log temporary files equal or larger
434
					# than the specified size in kilobytes;
435
					# -1 disables, 0 logs all temp files
436
log_timezone = 'US/Pacific'
437

    
438

    
439
#------------------------------------------------------------------------------
440
# RUNTIME STATISTICS
441
#------------------------------------------------------------------------------
442

    
443
# - Query/Index Statistics Collector -
444

    
445
#track_activities = on
446
#track_counts = on
447
#track_io_timing = off
448
#track_functions = none			# none, pl, all
449
#track_activity_query_size = 1024 	# (change requires restart)
450
#update_process_title = on
451
#stats_temp_directory = 'pg_stat_tmp'
452

    
453

    
454
# - Statistics Monitoring -
455

    
456
#log_parser_stats = off
457
#log_planner_stats = off
458
#log_executor_stats = off
459
#log_statement_stats = off
460

    
461

    
462
#------------------------------------------------------------------------------
463
# AUTOVACUUM PARAMETERS
464
#------------------------------------------------------------------------------
465

    
466
#autovacuum = on			# Enable autovacuum subprocess?  'on'
467
					# requires track_counts to also be on.
468
log_autovacuum_min_duration = 0	# -1 disables, 0 logs all actions and
469
#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
470
					# their durations, > 0 logs only
471
					# actions running at least this number
472
					# of milliseconds.
473
#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
474
					# (change requires restart)
475
#autovacuum_naptime = 1min		# time between autovacuum runs
476
#autovacuum_vacuum_threshold = 50	# min number of row updates before
477
					# vacuum
478
#autovacuum_analyze_threshold = 50	# min number of row updates before
479
					# analyze
480
#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
481
#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
482
#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
483
					# (change requires restart)
484
#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
485
					# autovacuum, in milliseconds;
486
					# -1 means use vacuum_cost_delay
487
#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
488
					# autovacuum, -1 means use
489
					# vacuum_cost_limit
490

    
491

    
492
#------------------------------------------------------------------------------
493
# CLIENT CONNECTION DEFAULTS
494
#------------------------------------------------------------------------------
495

    
496
# - Statement Behavior -
497

    
498
#search_path = '"$user",public'		# schema names
499
#default_tablespace = ''		# a tablespace name, '' uses the default
500
#temp_tablespaces = ''			# a list of tablespace names, '' uses
501
					# only default tablespace
502
#check_function_bodies = on
503
#default_transaction_isolation = 'read committed'
504
#default_transaction_read_only = off
505
#default_transaction_deferrable = off
506
#session_replication_role = 'origin'
507
#statement_timeout = 0			# in milliseconds, 0 is disabled
508
#lock_timeout = 0			# in milliseconds, 0 is disabled
509
#vacuum_freeze_min_age = 50000000
510
#vacuum_freeze_table_age = 150000000
511
#bytea_output = 'hex'			# hex, escape
512
#xmlbinary = 'base64'
513
#xmloption = 'content'
514

    
515
# - Locale and Formatting -
516

    
517
datestyle = 'iso, mdy'
518
#intervalstyle = 'postgres'
519
timezone = 'US/Pacific'
520
#timezone_abbreviations = 'Default'     # Select the set of available time zone
521
					# abbreviations.  Currently, there are
522
					#   Default
523
					#   Australia
524
					#   India
525
					# You can create your own file in
526
					# share/timezonesets/.
527
#extra_float_digits = 0			# min -15, max 3
528
#client_encoding = sql_ascii		# actually, defaults to database
529
					# encoding
530

    
531
# These settings are initialized by initdb, but they can be changed.
532
lc_messages = 'C'			# locale for system error message
533
					# strings
534
lc_monetary = 'C'			# locale for monetary formatting
535
lc_numeric = 'C'			# locale for number formatting
536
lc_time = 'C'				# locale for time formatting
537

    
538
# default configuration for text search
539
default_text_search_config = 'pg_catalog.english'
540

    
541
# - Other Defaults -
542

    
543
#dynamic_library_path = '$libdir'
544
#local_preload_libraries = ''
545

    
546

    
547
#------------------------------------------------------------------------------
548
# LOCK MANAGEMENT
549
#------------------------------------------------------------------------------
550

    
551
#deadlock_timeout = 1s
552
#max_locks_per_transaction = 64		# min 10
553
					# (change requires restart)
554
# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
555
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
556
# lock table slots.
557
#max_pred_locks_per_transaction = 64	# min 10
558
					# (change requires restart)
559

    
560

    
561
#------------------------------------------------------------------------------
562
# VERSION/PLATFORM COMPATIBILITY
563
#------------------------------------------------------------------------------
564

    
565
# - Previous PostgreSQL Versions -
566

    
567
#array_nulls = on
568
#backslash_quote = safe_encoding	# on, off, or safe_encoding
569
#default_with_oids = off
570
#escape_string_warning = on
571
#lo_compat_privileges = off
572
#quote_all_identifiers = off
573
#sql_inheritance = on
574
#standard_conforming_strings = on
575
#synchronize_seqscans = on
576

    
577
# - Other Platforms and Clients -
578

    
579
#transform_null_equals = off
580

    
581

    
582
#------------------------------------------------------------------------------
583
# ERROR HANDLING
584
#------------------------------------------------------------------------------
585

    
586
#exit_on_error = off			# terminate session on any error?
587
#restart_after_crash = on		# reinitialize after backend crash?
588

    
589

    
590
#------------------------------------------------------------------------------
591
# CONFIG FILE INCLUDES
592
#------------------------------------------------------------------------------
593

    
594
# These options allow settings to be loaded from files other than the
595
# default postgresql.conf.
596

    
597
#include_dir = 'conf.d'			# include files ending in '.conf' from
598
					# directory 'conf.d'
599
#include_if_exists = 'exists.conf'	# include file only if it exists
600
#include = 'special.conf'		# include file
601

    
602

    
603
#------------------------------------------------------------------------------
604
# CUSTOMIZED OPTIONS
605
#------------------------------------------------------------------------------
606

    
607
# Add settings for extensions here
(11-11/29)