Project

General

Profile

1 1722 aaronmk
# -----------------------------
2
# PostgreSQL configuration file
3
# -----------------------------
4
#
5
# This file consists of lines of the form:
6
#
7
#   name = value
8
#
9
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
10
# "#" anywhere on a line.  The complete list of parameter names and allowed
11
# values can be found in the PostgreSQL documentation.
12
#
13
# The commented-out settings shown in this file represent the default values.
14
# Re-commenting a setting is NOT sufficient to revert it to the default value;
15
# you need to reload the server.
16
#
17
# This file is read on server startup and when the server receives a SIGHUP
18
# signal.  If you edit the file on a running system, you have to SIGHUP the
19
# server for the changes to take effect, or use "pg_ctl reload".  Some
20
# parameters, which are marked below, require a server shutdown and restart to
21
# take effect.
22
#
23
# Any parameter can also be given as a command-line option to the server, e.g.,
24
# "postgres -c log_connections=on".  Some parameters can be changed at run time
25
# with the "SET" SQL command.
26
#
27
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
28
#                MB = megabytes                     s   = seconds
29
#                GB = gigabytes                     min = minutes
30
#                                                   h   = hours
31
#                                                   d   = days
32
33
34
#------------------------------------------------------------------------------
35
# FILE LOCATIONS
36
#------------------------------------------------------------------------------
37
38
# The default values of these variables are driven from the -D command-line
39
# option or PGDATA environment variable, represented here as ConfigDir.
40
41
#data_directory = 'ConfigDir'		# use data in another directory
42
					# (change requires restart)
43
#hba_file = 'ConfigDir/pg_hba.conf'	# host-based authentication file
44
					# (change requires restart)
45
#ident_file = 'ConfigDir/pg_ident.conf'	# ident configuration file
46
					# (change requires restart)
47
48
# If external_pid_file is not explicitly set, no extra PID file is written.
49
#external_pid_file = '(none)'		# write an extra PID file
50
					# (change requires restart)
51
52
53
#------------------------------------------------------------------------------
54
# CONNECTIONS AND AUTHENTICATION
55
#------------------------------------------------------------------------------
56
57
# - Connection Settings -
58
59
#listen_addresses = 'localhost'		# what IP address(es) to listen on;
60
					# comma-separated list of addresses;
61
					# defaults to 'localhost', '*' = all
62
					# (change requires restart)
63
#port = 5432				# (change requires restart)
64
max_connections = 100			# (change requires restart)
65
# Note:  Increasing max_connections costs ~400 bytes of shared memory per
66
# connection slot, plus lock space (see max_locks_per_transaction).
67
#superuser_reserved_connections = 3	# (change requires restart)
68
#unix_socket_directory = ''		# (change requires restart)
69
#unix_socket_group = ''			# (change requires restart)
70
#unix_socket_permissions = 0777		# begin with 0 to use octal notation
71
					# (change requires restart)
72
#bonjour = off				# advertise server via Bonjour
73
					# (change requires restart)
74
#bonjour_name = ''			# defaults to the computer name
75
					# (change requires restart)
76
77
# - Security and Authentication -
78
79
#authentication_timeout = 1min		# 1s-600s
80
ssl = off				# (change requires restart)
81
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
82
					# (change requires restart)
83
#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
84
#password_encryption = on
85
#db_user_namespace = off
86
87
# Kerberos and GSSAPI
88
#krb_server_keyfile = ''
89
#krb_srvname = 'postgres'		# (Kerberos only)
90
#krb_caseins_users = off
91
92
# - TCP Keepalives -
93
# see "man 7 tcp" for details
94
95
#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
96
					# 0 selects the system default
97
#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
98
					# 0 selects the system default
99
#tcp_keepalives_count = 0		# TCP_KEEPCNT;
100
					# 0 selects the system default
101
102
103
#------------------------------------------------------------------------------
104
# RESOURCE USAGE (except WAL)
105
#------------------------------------------------------------------------------
106
107
# - Memory -
108
109
# Set to slightly less than SHMMAX = 1.4GB
110
shared_buffers = 1400MB			# min 128kB
111
#shared_buffers = 32MB			# min 128kB
112
					# (change requires restart)
113
#temp_buffers = 8MB			# min 800kB
114
#max_prepared_transactions = 0		# zero disables the feature
115
					# (change requires restart)
116
# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
117
# per transaction slot, plus lock space (see max_locks_per_transaction).
118
# It is not advisable to set max_prepared_transactions nonzero unless you
119
# actively intend to use prepared transactions.
120
work_mem = 256MB				# min 64kB
121
#work_mem = 1MB				# min 64kB
122
maintenance_work_mem = 256MB		# min 1MB
123
#maintenance_work_mem = 16MB		# min 1MB
124
#max_stack_depth = 2MB			# min 100kB
125
126
# - Kernel Resource Usage -
127
128
#max_files_per_process = 1000		# min 25
129
					# (change requires restart)
130
#shared_preload_libraries = ''		# (change requires restart)
131
132
# - Cost-Based Vacuum Delay -
133
134
#vacuum_cost_delay = 0ms		# 0-100 milliseconds
135
#vacuum_cost_page_hit = 1		# 0-10000 credits
136
#vacuum_cost_page_miss = 10		# 0-10000 credits
137
#vacuum_cost_page_dirty = 20		# 0-10000 credits
138
#vacuum_cost_limit = 200		# 1-10000 credits
139
140
# - Background Writer -
141
142
#bgwriter_delay = 200ms			# 10-10000ms between rounds
143
#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
144
#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
145
146
# - Asynchronous Behavior -
147
148
#effective_io_concurrency = 1		# 1-1000. 0 disables prefetching
149
150
151
#------------------------------------------------------------------------------
152
# WRITE AHEAD LOG
153
#------------------------------------------------------------------------------
154
155
# - Settings -
156
157
#wal_level = minimal			# minimal, archive, or hot_standby
158
					# (change requires restart)
159
#fsync = on				# turns forced synchronization on or off
160
##### WARNING: Switching this off may cause data loss.
161
# It is used to improve performance with frequent commits. Each datasource makes
162
# ~10 commits/sec (which will hopefully increase after optimization), and there
163
# can be 10+ datasources running simultaneously, so the 100 commit/sec limit may
164
# be exceeded. See synchronous_commit at
165
# <http://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server#synchronous_commit>
166
#####
167
synchronous_commit = off		# immediate fsync at commit
168
#wal_sync_method = fsync		# the default is the first option
169
					# supported by the operating system:
170
					#   open_datasync
171
					#   fdatasync (default on Linux)
172
					#   fsync
173
					#   fsync_writethrough
174
					#   open_sync
175
#full_page_writes = on			# recover from partial page writes
176
#wal_buffers = 64kB			# min 32kB
177
					# (change requires restart)
178
#wal_writer_delay = 200ms		# 1-10000 milliseconds
179
180
#commit_delay = 0			# range 0-100000, in microseconds
181
#commit_siblings = 5			# range 1-1000
182
183
# - Checkpoints -
184
185
checkpoint_segments = 32		# in logfile segments, min 1, 16MB each
186
#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
187
#checkpoint_timeout = 5min		# range 30s-1h
188
checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
189
#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
190
#checkpoint_warning = 30s		# 0 disables
191
192
# - Archiving -
193
194
#archive_mode = off		# allows archiving to be done
195
				# (change requires restart)
196
#archive_command = ''		# command to use to archive a logfile segment
197
#archive_timeout = 0		# force a logfile segment switch after this
198
				# number of seconds; 0 disables
199
200
# - Streaming Replication -
201
202
#max_wal_senders = 0		# max number of walsender processes
203
				# (change requires restart)
204
#wal_sender_delay = 200ms	# walsender cycle time, 1-10000 milliseconds
205
#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
206
#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
207
208
# - Standby Servers -
209
210
#hot_standby = off			# "on" allows queries during recovery
211
					# (change requires restart)
212
#max_standby_archive_delay = 30s	# max delay before canceling queries
213
					# when reading WAL from archive;
214
					# -1 allows indefinite delay
215
#max_standby_streaming_delay = 30s	# max delay before canceling queries
216
					# when reading streaming WAL;
217
					# -1 allows indefinite delay
218
219
220
#------------------------------------------------------------------------------
221
# QUERY TUNING
222
#------------------------------------------------------------------------------
223
224
# - Planner Method Configuration -
225
226
#enable_bitmapscan = on
227
#enable_hashagg = on
228
#enable_hashjoin = on
229
#enable_indexscan = on
230
#enable_material = on
231
#enable_mergejoin = on
232
#enable_nestloop = on
233
#enable_seqscan = on
234
#enable_sort = on
235
#enable_tidscan = on
236
237
# - Planner Cost Constants -
238
239
#seq_page_cost = 1.0			# measured on an arbitrary scale
240
#random_page_cost = 4.0			# same scale as above
241
#cpu_tuple_cost = 0.01			# same scale as above
242
#cpu_index_tuple_cost = 0.005		# same scale as above
243
#cpu_operator_cost = 0.0025		# same scale as above
244
effective_cache_size = 4GB
245
#effective_cache_size = 128MB
246
247
# - Genetic Query Optimizer -
248
249
#geqo = on
250
#geqo_threshold = 12
251
#geqo_effort = 5			# range 1-10
252
#geqo_pool_size = 0			# selects default based on effort
253
#geqo_generations = 0			# selects default based on effort
254
#geqo_selection_bias = 2.0		# range 1.5-2.0
255
#geqo_seed = 0.0			# range 0.0-1.0
256
257
# - Other Planner Options -
258
259
#default_statistics_target = 100	# range 1-10000
260
#constraint_exclusion = partition	# on, off, or partition
261
#cursor_tuple_fraction = 0.1		# range 0.0-1.0
262
#from_collapse_limit = 8
263
#join_collapse_limit = 8		# 1 disables collapsing of explicit
264
					# JOIN clauses
265
266
267
#------------------------------------------------------------------------------
268
# ERROR REPORTING AND LOGGING
269
#------------------------------------------------------------------------------
270
271
# - Where to Log -
272
273
#log_destination = 'stderr'		# Valid values are combinations of
274
					# stderr, csvlog, syslog, and eventlog,
275
					# depending on platform.  csvlog
276
					# requires logging_collector to be on.
277
278
# This is used when logging to stderr:
279
#logging_collector = off		# Enable capturing of stderr and csvlog
280
					# into log files. Required to be on for
281
					# csvlogs.
282
					# (change requires restart)
283
284
# These are only used if logging_collector is on:
285
#log_directory = 'pg_log'		# directory where log files are written,
286
					# can be absolute or relative to PGDATA
287
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
288
					# can include strftime() escapes
289
#log_truncate_on_rotation = off		# If on, an existing log file of the
290
					# same name as the new log file will be
291
					# truncated rather than appended to.
292
					# But such truncation only occurs on
293
					# time-driven rotation, not on restarts
294
					# or size-driven rotation.  Default is
295
					# off, meaning append to existing files
296
					# in all cases.
297
#log_rotation_age = 1d			# Automatic rotation of logfiles will
298
					# happen after that time.  0 disables.
299
#log_rotation_size = 10MB		# Automatic rotation of logfiles will
300
					# happen after that much log output.
301
					# 0 disables.
302
303
# These are relevant when logging to syslog:
304
#syslog_facility = 'LOCAL0'
305
#syslog_ident = 'postgres'
306
307
#silent_mode = off			# Run server silently.
308
					# DO NOT USE without syslog or
309
					# logging_collector
310
					# (change requires restart)
311
312
313
# - When to Log -
314
315
#client_min_messages = notice		# values in order of decreasing detail:
316
					#   debug5
317
					#   debug4
318
					#   debug3
319
					#   debug2
320
					#   debug1
321
					#   log
322
					#   notice
323
					#   warning
324
					#   error
325
326
#log_min_messages = warning		# values in order of decreasing detail:
327
					#   debug5
328
					#   debug4
329
					#   debug3
330
					#   debug2
331
					#   debug1
332
					#   info
333
					#   notice
334
					#   warning
335
					#   error
336
					#   log
337
					#   fatal
338
					#   panic
339
340
#log_min_error_statement = error	# values in order of decreasing detail:
341
				 	#   debug5
342
					#   debug4
343
					#   debug3
344
					#   debug2
345
					#   debug1
346
				 	#   info
347
					#   notice
348
					#   warning
349
					#   error
350
					#   log
351
					#   fatal
352
					#   panic (effectively off)
353
354
#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
355
					# and their durations, > 0 logs only
356
					# statements running at least this number
357
					# of milliseconds
358
359
360
# - What to Log -
361
362
#debug_print_parse = off
363
#debug_print_rewritten = off
364
#debug_print_plan = off
365
#debug_pretty_print = on
366
#log_checkpoints = off
367
#log_connections = off
368
#log_disconnections = off
369
#log_duration = off
370
#log_error_verbosity = default		# terse, default, or verbose messages
371
#log_hostname = off
372
#log_line_prefix = ''			# special values:
373
					#   %a = application name
374
					#   %u = user name
375
					#   %d = database name
376
					#   %r = remote host and port
377
					#   %h = remote host
378
					#   %p = process ID
379
					#   %t = timestamp without milliseconds
380
					#   %m = timestamp with milliseconds
381
					#   %i = command tag
382
					#   %e = SQL state
383
					#   %c = session ID
384
					#   %l = session line number
385
					#   %s = session start timestamp
386
					#   %v = virtual transaction ID
387
					#   %x = transaction ID (0 if none)
388
					#   %q = stop here in non-session
389
					#        processes
390
					#   %% = '%'
391
					# e.g. '<%u%%%d> '
392
#log_lock_waits = off			# log lock waits >= deadlock_timeout
393
#log_statement = 'none'			# none, ddl, mod, all
394
#log_temp_files = -1			# log temporary files equal or larger
395
					# than the specified size in kilobytes;
396
					# -1 disables, 0 logs all temp files
397
#log_timezone = unknown			# actually, defaults to TZ environment
398
					# setting
399
400
401
#------------------------------------------------------------------------------
402
# RUNTIME STATISTICS
403
#------------------------------------------------------------------------------
404
405
# - Query/Index Statistics Collector -
406
407
#track_activities = on
408
#track_counts = on
409
#track_functions = none			# none, pl, all
410
#track_activity_query_size = 1024 	# (change requires restart)
411
#update_process_title = on
412
#stats_temp_directory = 'pg_stat_tmp'
413
414
415
# - Statistics Monitoring -
416
417
#log_parser_stats = off
418
#log_planner_stats = off
419
#log_executor_stats = off
420
#log_statement_stats = off
421
422
423
#------------------------------------------------------------------------------
424
# AUTOVACUUM PARAMETERS
425
#------------------------------------------------------------------------------
426
427
#autovacuum = on			# Enable autovacuum subprocess?  'on'
428
					# requires track_counts to also be on.
429
#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
430
					# their durations, > 0 logs only
431
					# actions running at least this number
432
					# of milliseconds.
433
#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
434
					# (change requires restart)
435
#autovacuum_naptime = 1min		# time between autovacuum runs
436
#autovacuum_vacuum_threshold = 50	# min number of row updates before
437
					# vacuum
438
#autovacuum_analyze_threshold = 50	# min number of row updates before
439
					# analyze
440
#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
441
#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
442
#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
443
					# (change requires restart)
444
#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
445
					# autovacuum, in milliseconds;
446
					# -1 means use vacuum_cost_delay
447
#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
448
					# autovacuum, -1 means use
449
					# vacuum_cost_limit
450
451
452
#------------------------------------------------------------------------------
453
# CLIENT CONNECTION DEFAULTS
454
#------------------------------------------------------------------------------
455
456
# - Statement Behavior -
457
458
#search_path = '"$user",public'		# schema names
459
#default_tablespace = ''		# a tablespace name, '' uses the default
460
#temp_tablespaces = ''			# a list of tablespace names, '' uses
461
					# only default tablespace
462
#check_function_bodies = on
463
#default_transaction_isolation = 'read committed'
464
#default_transaction_read_only = off
465
#session_replication_role = 'origin'
466
#statement_timeout = 0			# in milliseconds, 0 is disabled
467
#vacuum_freeze_min_age = 50000000
468
#vacuum_freeze_table_age = 150000000
469
#bytea_output = 'hex'			# hex, escape
470
#xmlbinary = 'base64'
471
#xmloption = 'content'
472
473
# - Locale and Formatting -
474
475
datestyle = 'iso, mdy'
476
#intervalstyle = 'postgres'
477
#timezone = unknown			# actually, defaults to TZ environment
478
					# setting
479
#timezone_abbreviations = 'Default'     # Select the set of available time zone
480
					# abbreviations.  Currently, there are
481
					#   Default
482
					#   Australia
483
					#   India
484
					# You can create your own file in
485
					# share/timezonesets/.
486
#extra_float_digits = 0			# min -15, max 3
487
#client_encoding = sql_ascii		# actually, defaults to database
488
					# encoding
489
490
# These settings are initialized by initdb, but they can be changed.
491
lc_messages = 'en_US.UTF-8'			# locale for system error message
492
					# strings
493
lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
494
lc_numeric = 'en_US.UTF-8'			# locale for number formatting
495
lc_time = 'en_US.UTF-8'				# locale for time formatting
496
497
# default configuration for text search
498
default_text_search_config = 'pg_catalog.english'
499
500
# - Other Defaults -
501
502
#dynamic_library_path = '$libdir'
503
#local_preload_libraries = ''
504
505
506
#------------------------------------------------------------------------------
507
# LOCK MANAGEMENT
508
#------------------------------------------------------------------------------
509
510
#deadlock_timeout = 1s
511
#max_locks_per_transaction = 64		# min 10
512
					# (change requires restart)
513
# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
514
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
515
# lock table slots.
516
517
518
#------------------------------------------------------------------------------
519
# VERSION/PLATFORM COMPATIBILITY
520
#------------------------------------------------------------------------------
521
522
# - Previous PostgreSQL Versions -
523
524
#array_nulls = on
525
#backslash_quote = safe_encoding	# on, off, or safe_encoding
526
#default_with_oids = off
527
#escape_string_warning = on
528
#lo_compat_privileges = off
529
#sql_inheritance = on
530
#standard_conforming_strings = off
531
#synchronize_seqscans = on
532
533
# - Other Platforms and Clients -
534
535
#transform_null_equals = off
536
537
538
#------------------------------------------------------------------------------
539
# CUSTOMIZED OPTIONS
540
#------------------------------------------------------------------------------
541
542
#custom_variable_classes = ''		# list of custom variable class names