Project

General

Profile

1
# -----------------------------
2
# PostgreSQL configuration file
3
# -----------------------------
4
#
5
# This file consists of lines of the form:
6
#
7
#   name = value
8
#
9
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
10
# "#" anywhere on a line.  The complete list of parameter names and allowed
11
# values can be found in the PostgreSQL documentation.
12
#
13
# The commented-out settings shown in this file represent the default values.
14
# Re-commenting a setting is NOT sufficient to revert it to the default value;
15
# you need to reload the server.
16
#
17
# This file is read on server startup and when the server receives a SIGHUP
18
# signal.  If you edit the file on a running system, you have to SIGHUP the
19
# server for the changes to take effect, or use "pg_ctl reload".  Some
20
# parameters, which are marked below, require a server shutdown and restart to
21
# take effect.
22
#
23
# Any parameter can also be given as a command-line option to the server, e.g.,
24
# "postgres -c log_connections=on".  Some parameters can be changed at run time
25
# with the "SET" SQL command.
26
#
27
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
28
#                MB = megabytes                     s   = seconds
29
#                GB = gigabytes                     min = minutes
30
#                                                   h   = hours
31
#                                                   d   = days
32

    
33

    
34
#------------------------------------------------------------------------------
35
# FILE LOCATIONS
36
#------------------------------------------------------------------------------
37

    
38
# The default values of these variables are driven from the -D command-line
39
# option or PGDATA environment variable, represented here as ConfigDir.
40

    
41
data_directory = '/var/lib/postgresql/9.1/main'		# use data in another directory
42
					# (change requires restart)
43
hba_file = '/etc/postgresql/9.1/main/pg_hba.conf'	# host-based authentication file
44
					# (change requires restart)
45
ident_file = '/etc/postgresql/9.1/main/pg_ident.conf'	# ident configuration file
46
					# (change requires restart)
47

    
48
# If external_pid_file is not explicitly set, no extra PID file is written.
49
external_pid_file = '/var/run/postgresql/9.1-main.pid'		# write an extra PID file
50
					# (change requires restart)
51

    
52

    
53
#------------------------------------------------------------------------------
54
# CONNECTIONS AND AUTHENTICATION
55
#------------------------------------------------------------------------------
56

    
57
# - Connection Settings -
58

    
59
listen_addresses = '*'			# what IP address(es) to listen on;
60
					# comma-separated list of addresses;
61
					# defaults to 'localhost', '*' = all
62
					# (change requires restart)
63
port = 5432				# (change requires restart)
64
max_connections = 100			# (change requires restart)
65
# Note:  Increasing max_connections costs ~400 bytes of shared memory per 
66
# connection slot, plus lock space (see max_locks_per_transaction).
67
#superuser_reserved_connections = 3	# (change requires restart)
68
unix_socket_directory = '/var/run/postgresql'		# (change requires restart)
69
#unix_socket_group = ''			# (change requires restart)
70
#unix_socket_permissions = 0777		# begin with 0 to use octal notation
71
					# (change requires restart)
72
#bonjour_name = ''			# defaults to the computer name
73
					# (change requires restart)
74

    
75
# - Security and Authentication -
76

    
77
#authentication_timeout = 1min		# 1s-600s
78
ssl = true				# (change requires restart)
79
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
80
					# (change requires restart)
81
#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
82
#password_encryption = on
83
#db_user_namespace = off
84

    
85
# Kerberos and GSSAPI
86
#krb_server_keyfile = ''
87
#krb_srvname = 'postgres'		# (Kerberos only)
88
#krb_caseins_users = off
89

    
90
# - TCP Keepalives -
91
# see "man 7 tcp" for details
92

    
93
#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
94
					# 0 selects the system default
95
#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
96
					# 0 selects the system default
97
#tcp_keepalives_count = 0		# TCP_KEEPCNT;
98
					# 0 selects the system default
99

    
100

    
101
#------------------------------------------------------------------------------
102
# RESOURCE USAGE (except WAL)
103
#------------------------------------------------------------------------------
104

    
105
# - Memory -
106

    
107
# Set to slightly less than SHMMAX = 3.9GB
108
shared_buffers = 3900MB			# min 128kB
109
					# (change requires restart)
110
#temp_buffers = 8MB			# min 800kB
111
#max_prepared_transactions = 0		# zero disables the feature
112
					# (change requires restart)
113
# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
114
# per transaction slot, plus lock space (see max_locks_per_transaction).
115
# It is not advisable to set max_prepared_transactions nonzero unless you
116
# actively intend to use prepared transactions.
117
work_mem = 256MB				# min 64kB
118
#work_mem = 1MB				# min 64kB
119
maintenance_work_mem = 256MB		# min 1MB
120
#maintenance_work_mem = 16MB		# min 1MB
121
#max_stack_depth = 2MB			# min 100kB
122

    
123
# - Kernel Resource Usage -
124

    
125
#max_files_per_process = 1000		# min 25
126
					# (change requires restart)
127
#shared_preload_libraries = ''		# (change requires restart)
128

    
129
# - Cost-Based Vacuum Delay -
130

    
131
#vacuum_cost_delay = 0ms		# 0-100 milliseconds
132
#vacuum_cost_page_hit = 1		# 0-10000 credits
133
#vacuum_cost_page_miss = 10		# 0-10000 credits
134
#vacuum_cost_page_dirty = 20		# 0-10000 credits
135
#vacuum_cost_limit = 200		# 1-10000 credits
136

    
137
# - Background Writer -
138

    
139
#bgwriter_delay = 200ms			# 10-10000ms between rounds
140
#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
141
#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
142

    
143
# - Asynchronous Behavior -
144

    
145
#effective_io_concurrency = 1		# 1-1000. 0 disables prefetching
146

    
147

    
148
#------------------------------------------------------------------------------
149
# WRITE AHEAD LOG
150
#------------------------------------------------------------------------------
151

    
152
# - Settings -
153

    
154
#fsync = on				# turns forced synchronization on or off
155
##### WARNING: Switching this off may cause data loss.
156
# It is used to improve performance with frequent commits. Each datasource makes
157
# ~10 commits/sec (which will hopefully increase after optimization), and there
158
# can be 10+ datasources running simultaneously, so the 100 commit/sec limit may
159
# be exceeded. See synchronous_commit at
160
# <http://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server#synchronous_commit>
161
#####
162
synchronous_commit = off		# immediate fsync at commit
163
#wal_sync_method = fsync		# the default is the first option 
164
					# supported by the operating system:
165
					#   open_datasync
166
					#   fdatasync
167
					#   fsync
168
					#   fsync_writethrough
169
					#   open_sync
170
#full_page_writes = on			# recover from partial page writes
171
#wal_buffers = 64kB			# min 32kB
172
					# (change requires restart)
173
#wal_writer_delay = 200ms		# 1-10000 milliseconds
174

    
175
#commit_delay = 0			# range 0-100000, in microseconds
176
#commit_siblings = 5			# range 1-1000
177

    
178
# - Checkpoints -
179

    
180
checkpoint_segments = 32		# in logfile segments, min 1, 16MB each
181
#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
182
#checkpoint_timeout = 5min		# range 30s-1h
183
checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
184
#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
185
#checkpoint_warning = 30s		# 0 disables
186

    
187
# - Archiving -
188

    
189
#archive_mode = off		# allows archiving to be done
190
				# (change requires restart)
191
#archive_command = ''		# command to use to archive a logfile segment
192
#archive_timeout = 0		# force a logfile segment switch after this
193
				# number of seconds; 0 disables
194

    
195

    
196
#------------------------------------------------------------------------------
197
# QUERY TUNING
198
#------------------------------------------------------------------------------
199

    
200
# - Planner Method Configuration -
201

    
202
#enable_bitmapscan = on
203
#enable_hashagg = on
204
#enable_hashjoin = on
205
#enable_indexscan = on
206
#enable_mergejoin = on
207
#enable_nestloop = on
208
#enable_seqscan = on
209
#enable_sort = on
210
#enable_tidscan = on
211

    
212
# - Planner Cost Constants -
213

    
214
#seq_page_cost = 1.0			# measured on an arbitrary scale
215
#random_page_cost = 4.0			# same scale as above
216
#cpu_tuple_cost = 0.01			# same scale as above
217
#cpu_index_tuple_cost = 0.005		# same scale as above
218
#cpu_operator_cost = 0.0025		# same scale as above
219
effective_cache_size = 12GB
220
#effective_cache_size = 128MB
221

    
222
# - Genetic Query Optimizer -
223

    
224
#geqo = on
225
#geqo_threshold = 12
226
#geqo_effort = 5			# range 1-10
227
#geqo_pool_size = 0			# selects default based on effort
228
#geqo_generations = 0			# selects default based on effort
229
#geqo_selection_bias = 2.0		# range 1.5-2.0
230

    
231
# - Other Planner Options -
232

    
233
#default_statistics_target = 100	# range 1-10000
234
#constraint_exclusion = partition	# on, off, or partition
235
#cursor_tuple_fraction = 0.1		# range 0.0-1.0
236
#from_collapse_limit = 8
237
#join_collapse_limit = 8		# 1 disables collapsing of explicit 
238
					# JOIN clauses
239

    
240

    
241
#------------------------------------------------------------------------------
242
# ERROR REPORTING AND LOGGING
243
#------------------------------------------------------------------------------
244

    
245
# - Where to Log -
246

    
247
#log_destination = 'stderr'		# Valid values are combinations of
248
					# stderr, csvlog, syslog and eventlog,
249
					# depending on platform.  csvlog
250
					# requires logging_collector to be on.
251

    
252
# This is used when logging to stderr:
253
#logging_collector = off		# Enable capturing of stderr and csvlog
254
					# into log files. Required to be on for
255
					# csvlogs.
256
					# (change requires restart)
257

    
258
# These are only used if logging_collector is on:
259
#log_directory = 'pg_log'		# directory where log files are written,
260
					# can be absolute or relative to PGDATA
261
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
262
					# can include strftime() escapes
263
#log_truncate_on_rotation = off		# If on, an existing log file of the
264
					# same name as the new log file will be
265
					# truncated rather than appended to.
266
					# But such truncation only occurs on
267
					# time-driven rotation, not on restarts
268
					# or size-driven rotation.  Default is
269
					# off, meaning append to existing files
270
					# in all cases.
271
#log_rotation_age = 1d			# Automatic rotation of logfiles will
272
					# happen after that time.  0 disables.
273
#log_rotation_size = 10MB		# Automatic rotation of logfiles will 
274
					# happen after that much log output.
275
					# 0 disables.
276

    
277
# These are relevant when logging to syslog:
278
#syslog_facility = 'LOCAL0'
279
#syslog_ident = 'postgres'
280

    
281
#silent_mode = off			# Run server silently.
282
					# DO NOT USE without syslog or
283
					# logging_collector
284
					# (change requires restart)
285

    
286

    
287
# - When to Log -
288

    
289
#client_min_messages = notice		# values in order of decreasing detail:
290
					#   debug5
291
					#   debug4
292
					#   debug3
293
					#   debug2
294
					#   debug1
295
					#   log
296
					#   notice
297
					#   warning
298
					#   error
299

    
300
#log_min_messages = warning		# values in order of decreasing detail:
301
					#   debug5
302
					#   debug4
303
					#   debug3
304
					#   debug2
305
					#   debug1
306
					#   info
307
					#   notice
308
					#   warning
309
					#   error
310
					#   log
311
					#   fatal
312
					#   panic
313

    
314
#log_error_verbosity = default		# terse, default, or verbose messages
315

    
316
#log_min_error_statement = error	# values in order of decreasing detail:
317
				 	#   debug5
318
					#   debug4
319
					#   debug3
320
					#   debug2
321
					#   debug1
322
				 	#   info
323
					#   notice
324
					#   warning
325
					#   error
326
					#   log
327
					#   fatal
328
					#   panic (effectively off)
329

    
330
#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
331
					# and their durations, > 0 logs only
332
					# statements running at least this number
333
					# of milliseconds
334

    
335

    
336
# - What to Log -
337

    
338
#debug_print_parse = off
339
#debug_print_rewritten = off
340
#debug_print_plan = off
341
#debug_pretty_print = on
342
#log_checkpoints = off
343
#log_connections = off
344
#log_disconnections = off
345
#log_duration = off
346
#log_hostname = off
347
log_line_prefix = '%t '			# special values:
348
					#   %u = user name
349
					#   %d = database name
350
					#   %r = remote host and port
351
					#   %h = remote host
352
					#   %p = process ID
353
					#   %t = timestamp without milliseconds
354
					#   %m = timestamp with milliseconds
355
					#   %i = command tag
356
					#   %c = session ID
357
					#   %l = session line number
358
					#   %s = session start timestamp
359
					#   %v = virtual transaction ID
360
					#   %x = transaction ID (0 if none)
361
					#   %q = stop here in non-session
362
					#        processes
363
					#   %% = '%'
364
					# e.g. '<%u%%%d> '
365
#log_lock_waits = off			# log lock waits >= deadlock_timeout
366
#log_statement = 'none'			# none, ddl, mod, all
367
#log_temp_files = -1			# log temporary files equal or larger
368
					# than the specified size in kilobytes;
369
					# -1 disables, 0 logs all temp files
370
#log_timezone = unknown			# actually, defaults to TZ environment
371
					# setting
372

    
373

    
374
#------------------------------------------------------------------------------
375
# RUNTIME STATISTICS
376
#------------------------------------------------------------------------------
377

    
378
# - Query/Index Statistics Collector -
379

    
380
#track_activities = on
381
#track_counts = on
382
#track_functions = none			# none, pl, all
383
#track_activity_query_size = 1024
384
#update_process_title = on
385
#stats_temp_directory = 'pg_stat_tmp'
386

    
387

    
388
# - Statistics Monitoring -
389

    
390
#log_parser_stats = off
391
#log_planner_stats = off
392
#log_executor_stats = off
393
#log_statement_stats = off
394

    
395

    
396
#------------------------------------------------------------------------------
397
# AUTOVACUUM PARAMETERS
398
#------------------------------------------------------------------------------
399

    
400
#autovacuum = on			# Enable autovacuum subprocess?  'on' 
401
					# requires track_counts to also be on.
402
#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
403
					# their durations, > 0 logs only
404
					# actions running at least this number
405
					# of milliseconds.
406
#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
407
#autovacuum_naptime = 1min		# time between autovacuum runs
408
#autovacuum_vacuum_threshold = 50	# min number of row updates before
409
					# vacuum
410
#autovacuum_analyze_threshold = 50	# min number of row updates before 
411
					# analyze
412
#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
413
#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
414
#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
415
					# (change requires restart)
416
#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
417
					# autovacuum, in milliseconds;
418
					# -1 means use vacuum_cost_delay
419
#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
420
					# autovacuum, -1 means use
421
					# vacuum_cost_limit
422

    
423

    
424
#------------------------------------------------------------------------------
425
# CLIENT CONNECTION DEFAULTS
426
#------------------------------------------------------------------------------
427

    
428
# - Statement Behavior -
429

    
430
#search_path = '"$user",public'		# schema names
431
#default_tablespace = ''		# a tablespace name, '' uses the default
432
#temp_tablespaces = ''			# a list of tablespace names, '' uses
433
					# only default tablespace
434
#check_function_bodies = on
435
#default_transaction_isolation = 'read committed'
436
#default_transaction_read_only = off
437
#session_replication_role = 'origin'
438
#statement_timeout = 0			# in milliseconds, 0 is disabled
439
#vacuum_freeze_min_age = 50000000
440
#vacuum_freeze_table_age = 150000000
441
#xmlbinary = 'base64'
442
#xmloption = 'content'
443

    
444
# - Locale and Formatting -
445

    
446
datestyle = 'iso, mdy'
447
#intervalstyle = 'postgres'
448
#timezone = unknown			# actually, defaults to TZ environment
449
					# setting
450
#timezone_abbreviations = 'Default'     # Select the set of available time zone
451
					# abbreviations.  Currently, there are
452
					#   Default
453
					#   Australia
454
					#   India
455
					# You can create your own file in
456
					# share/timezonesets/.
457
#extra_float_digits = 0			# min -15, max 2
458
#client_encoding = sql_ascii		# actually, defaults to database
459
					# encoding
460

    
461
# These settings are initialized by initdb, but they can be changed.
462
lc_messages = 'en_US.UTF-8'			# locale for system error message
463
					# strings
464
lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
465
lc_numeric = 'en_US.UTF-8'			# locale for number formatting
466
lc_time = 'en_US.UTF-8'				# locale for time formatting
467

    
468
# default configuration for text search
469
default_text_search_config = 'pg_catalog.english'
470

    
471
# - Other Defaults -
472

    
473
#dynamic_library_path = '$libdir'
474
#local_preload_libraries = ''
475

    
476

    
477
#------------------------------------------------------------------------------
478
# LOCK MANAGEMENT
479
#------------------------------------------------------------------------------
480

    
481
#deadlock_timeout = 1s
482
#max_locks_per_transaction = 64		# min 10
483
					# (change requires restart)
484
# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
485
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
486
# lock table slots.
487

    
488

    
489
#------------------------------------------------------------------------------
490
# VERSION/PLATFORM COMPATIBILITY
491
#------------------------------------------------------------------------------
492

    
493
# - Previous PostgreSQL Versions -
494

    
495
#add_missing_from = off
496
#array_nulls = on
497
#backslash_quote = safe_encoding	# on, off, or safe_encoding
498
#default_with_oids = off
499
#escape_string_warning = on
500
#regex_flavor = advanced		# advanced, extended, or basic
501
#sql_inheritance = on
502
#standard_conforming_strings = off
503
#synchronize_seqscans = on
504

    
505
# - Other Platforms and Clients -
506

    
507
#transform_null_equals = off
508

    
509

    
510
#------------------------------------------------------------------------------
511
# CUSTOMIZED OPTIONS
512
#------------------------------------------------------------------------------
513

    
514
#custom_variable_classes = ''		# list of custom variable class names
(5-5/18)