Project

General

Profile

Download (3.18 KB) Statistics
| Revision:

root/inputs/SALVIAS/maps/VegCSV.plots.csv @ 3940

1 3925 aaronmk 
SALVIAS,VegCSV[DwC],Comments
2 
PlotID,plotID,"Brad: This is artificial internal database ID; a unique identifier within SALVIAS DB to each plot, within the table plotMetadata."
3 1792 aaronmk 
orig_filename,,
4 
AccessCode,,
5 3925 aaronmk 
project_id,projectName,
6 1792 aaronmk 
PrimOwnerID,,
7 3925 aaronmk 
SiteCode,plotName,Brad: plotCode is as-assigned by data provider; guranteed to be unique only within dataset (=project)
8 1792 aaronmk 
SiteName,,
9 
new_world,,
10 3925 aaronmk 
MajorGeo,continent,
11 
Country,country,
12 
PolDiv1,stateProvince,Brad: No; pol1=stateProvince
13 1792 aaronmk 
pol1_type,,
14 3925 aaronmk 
pol2,county,Brad: No pol2=countyParish
15 1792 aaronmk 
pol2_type,,
16 
lat_string,,
17 
long_string,,
18 3925 aaronmk 
LatDec,decimalLatitude,
19 
LongDec,decimalLongitude,
20 1792 aaronmk 
lat_long_accuracy,,
21 3925 aaronmk 
Elev,verbatimElevation,Brad: Mean elevation in meters. This is a constrained decimal value; is there no place for this in VegX other than verbatimElevation? Check with Nick.
22 
elev_max_m,maximumElevationInMeters,
23 
elev_min_m,minimumElevationInMeters,
24 
Precip,precipitation,
25 1792 aaronmk 
ElevSource,,
26 3925 aaronmk 
Temp,temperature,
27 1792 aaronmk 
PrecipSource,,
28 
TempSource,,
29 
bearing,,
30 3925 aaronmk 
slope_aspect,slopeAspect,
31 
slope_gradient,slopeGradient,
32 
clay_percent,"clay/_units:[default=""%"",to=]/value",
33 
silt_percent,"silt/_units:[default=""%"",to=]/value",
34 
sand_percent,"sand/_units:[default=""%"",to=]/value",
35 
pH,ph,"Brad: For all these soil variables, how do we store information on method, units. Seems like an ontological structure would be more appropriate (measurementName, measurementValue, measurementUnits, measurementMethod). Same as BIEN traits table. Something to discuss."
36 
soil_N,"nitrogen/_units:[default=""%"",to=]/value",
37 
soil_P,"phosphorus/_units:[default=""%"",to=]/value/_map:[""<1,5""=0,*=*]/value",
38 
soil_C,"carbon/_units:[default=""%"",to=]/value",
39 
soil_K,"potassium/_units:[default=""%"",to=]/value",
40 
soil_Mg,"magnesium/_units:[default=""%"",to=]/value",
41 
soil_Ca,"calcium/_units:[default=""%"",to=]/value",
42 
soil_Na,"sodium/_units:[default=""%"",to=]/value",
43 
soil_acidity,"acidity/_units:[default=""%"",to=]/value/_map:[""<0.05""=0,*=*]/value",
44 
soil_base,"baseSaturation/_units:[default=""%"",to=]/value",
45 
soil_cation_cap,cationExchangeCapacity,
46 
soil_conductivity,conductivity,
47 
organic_percent,"organic/_units:[default=""%"",to=]/value",
48 
soil_texture,"texture/_units:[default=""%"",to=]/value",
49 1792 aaronmk 
RevisionComments,,
50 3925 aaronmk 
Locality_Description,locality,"Brad: No; this is free text description of locality where plot was situated, same as for DwC. Not a description of vegetation. Most likely='namedPlace.placeDescription' in VB; not sure about VX, again need to ask Nick where locality descriptions live in VX"
51 1792 aaronmk 
topography_desc,,
52 
vegetation_1,,
53 
vegetation_2,,
54 
Habitat,,
55 3925 aaronmk 
life_zone_code,communityID,
56 
life_zone,communityName,
57 
PlotMethod,samplingProtocol,
58 1792 aaronmk 
MethodCode,,
59 3925 aaronmk 
plot_area_ha,plotArea,"Brad: Area in hectares. Is there any way to store units?; Aaron: VegX plot area annotation says ""Total area of the plot in square meters."" so units are fixed"
60 1792 aaronmk 
recensused,,"Brad: This is a 0/1 value, internal to SALVIAS. 1 indicates that a  plot has >1 set of values, from different census events.; Aaron: Different censuses are distinguished in organisms data by different census_no values"
61 3925 aaronmk 
date_start,plotEventStartDate/_*/date,
62 
date_finish,plotEventEndDate/_*/date,
63 1792 aaronmk 
plot_administrator,,
64 
plot_notes,,
65 
tmp_del,,