Revision 3985
Added by Aaron Marcuse-Kubitza over 12 years ago
| inputs/Madidi/test/import.plots.xml.ref | ||
|---|---|---|
| 52 | 52 |
</value> |
| 53 | 53 |
</_units> |
| 54 | 54 |
</from> |
| 55 |
<to> |
|
| 56 |
<_units> |
|
| 57 |
<default>m</default> |
|
| 58 |
<to>m</to> |
|
| 59 |
<to></to> |
|
| 60 |
<value> |
|
| 61 |
<_alt> |
|
| 62 |
<2> |
|
| 63 |
<_rangeEnd> |
|
| 64 |
<value> |
|
| 65 |
<_replace> |
|
| 66 |
<\bca\.?></\bca\.?> |
|
| 67 |
<value>$Minimum altitude</value> |
|
| 68 |
</_replace> |
|
| 69 |
</value> |
|
| 70 |
</_rangeEnd> |
|
| 71 |
</2> |
|
| 72 |
</_alt> |
|
| 73 |
</value> |
|
| 74 |
</_units> |
|
| 75 |
</to> |
|
| 55 | 76 |
</_range> |
| 56 | 77 |
</elevationrange> |
| 57 | 78 |
<landform>$Topographical situation</landform> |
| inputs/Madidi/maps/VegBIEN.plots.csv | ||
|---|---|---|
| 3 | 3 |
Altitude,"/location/elevation/_alt/1/_replace:[""\bca\.?""=]/value", |
| 4 | 4 |
Minimum altitude,"/location/elevation/_alt/2/_avg/min/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 5 | 5 |
Minimum altitude,"/location/elevationrange/_range/from/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 6 |
Minimum altitude,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_alt/2/_rangeEnd/value/_replace:[""\bca\.?""=]/value", |
|
| 6 | 7 |
Topographical situation,/location/landform, |
| 7 | 8 |
Latitude,"/location/locationdetermination/latitude/_alt/1/_nullIf:[null=0,type=float]/value/_alt/1", |
| 8 | 9 |
Latitude (DMS),"/location/locationdetermination/latitude/_alt/1/_nullIf:[null=0,type=float]/value/_alt/2", |
| inputs/SALVIAS-CSV/test/import.plots.xml.ref | ||
|---|---|---|
| 18 | 18 |
<to>m</to> |
| 19 | 19 |
<to></to> |
| 20 | 20 |
<value> |
| 21 |
<_rangeEnd> |
|
| 22 |
<value> |
|
| 23 |
<_replace> |
|
| 24 |
<\bca\.?></\bca\.?> |
|
| 25 |
<value>$elev_max_m</value> |
|
| 26 |
</_replace> |
|
| 27 |
</value> |
|
| 28 |
</_rangeEnd> |
|
| 21 |
<_replace> |
|
| 22 |
<\bca\.?></\bca\.?> |
|
| 23 |
<value>$elev_max_m</value> |
|
| 24 |
</_replace> |
|
| 29 | 25 |
</value> |
| 30 | 26 |
</_units> |
| 31 | 27 |
</max> |
| ... | ... | |
| 75 | 71 |
<to>m</to> |
| 76 | 72 |
<to></to> |
| 77 | 73 |
<value> |
| 78 |
<_rangeEnd>
|
|
| 79 |
<value>
|
|
| 74 |
<_alt>
|
|
| 75 |
<1>
|
|
| 80 | 76 |
<_replace> |
| 81 | 77 |
<\bca\.?></\bca\.?> |
| 82 | 78 |
<value>$elev_max_m</value> |
| 83 | 79 |
</_replace> |
| 84 |
</value> |
|
| 85 |
</_rangeEnd> |
|
| 80 |
</1> |
|
| 81 |
<2> |
|
| 82 |
<_rangeEnd> |
|
| 83 |
<value> |
|
| 84 |
<_replace> |
|
| 85 |
<\bca\.?></\bca\.?> |
|
| 86 |
<value>$elev_min_m</value> |
|
| 87 |
</_replace> |
|
| 88 |
</value> |
|
| 89 |
</_rangeEnd> |
|
| 90 |
</2> |
|
| 91 |
</_alt> |
|
| 86 | 92 |
</value> |
| 87 | 93 |
</_units> |
| 88 | 94 |
</to> |
| inputs/SALVIAS-CSV/maps/VegBIEN.plots.csv | ||
|---|---|---|
| 1 | 1 |
SALVIAS-CSV,VegBIEN:,Comments |
| 2 | 2 |
plot_area_ha,/location/area,"Brad: Area in hectares. Is there any way to store units?; Aaron: VegX plot area annotation says ""Total area of the plot in square meters."" so units are fixed" |
| 3 | 3 |
elev_m,"/location/elevation/_alt/1/_replace:[""\bca\.?""=]/value",Brad: Mean elevation in meters. This is a constrained decimal value; is there no place for this in VegX other than verbatimElevation? Check with Nick. |
| 4 |
elev_max_m,"/location/elevation/_alt/2/_avg/max/_units:[default=m,to=m,to=]/value/_rangeEnd/value/_replace:[""\bca\.?""=]/value",
|
|
| 4 |
elev_max_m,"/location/elevation/_alt/2/_avg/max/_units:[default=m,to=m,to=]/value/_replace:[""\bca\.?""=]/value", |
|
| 5 | 5 |
elev_min_m,"/location/elevation/_alt/2/_avg/min/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 6 | 6 |
elev_min_m,"/location/elevationrange/_range/from/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 7 |
elev_max_m,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_rangeEnd/value/_replace:[""\bca\.?""=]/value", |
|
| 7 |
elev_max_m,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_alt/1/_replace:[""\bca\.?""=]/value", |
|
| 8 |
elev_min_m,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_alt/2/_rangeEnd/value/_replace:[""\bca\.?""=]/value", |
|
| 8 | 9 |
lat_decimal,"/location/locationdetermination/latitude/_alt/1/_nullIf:[null=0,type=float]/value", |
| 9 | 10 |
long_decimal,"/location/locationdetermination/longitude/_alt/1/_nullIf:[null=0,type=float]/value", |
| 10 | 11 |
pol2,"/location/locationdetermination/namedplace_id/_simplifyPath:[next=""parent_id/namedplace"",require=placename]/path/_forEach:[in:[],do=""namedplace[rank=_val]/parent_id""]/namedplace[rank=county]/placename",Brad: No pol2=countyParish |
| inputs/SALVIAS/test/import.plots.xml.ref | ||
|---|---|---|
| 18 | 18 |
<to>m</to> |
| 19 | 19 |
<to></to> |
| 20 | 20 |
<value> |
| 21 |
<_rangeEnd> |
|
| 22 |
<value> |
|
| 23 |
<_replace> |
|
| 24 |
<\bca\.?></\bca\.?> |
|
| 25 |
<value>$elev_max_m</value> |
|
| 26 |
</_replace> |
|
| 27 |
</value> |
|
| 28 |
</_rangeEnd> |
|
| 21 |
<_replace> |
|
| 22 |
<\bca\.?></\bca\.?> |
|
| 23 |
<value>$elev_max_m</value> |
|
| 24 |
</_replace> |
|
| 29 | 25 |
</value> |
| 30 | 26 |
</_units> |
| 31 | 27 |
</max> |
| ... | ... | |
| 75 | 71 |
<to>m</to> |
| 76 | 72 |
<to></to> |
| 77 | 73 |
<value> |
| 78 |
<_rangeEnd>
|
|
| 79 |
<value>
|
|
| 74 |
<_alt>
|
|
| 75 |
<1>
|
|
| 80 | 76 |
<_replace> |
| 81 | 77 |
<\bca\.?></\bca\.?> |
| 82 | 78 |
<value>$elev_max_m</value> |
| 83 | 79 |
</_replace> |
| 84 |
</value> |
|
| 85 |
</_rangeEnd> |
|
| 80 |
</1> |
|
| 81 |
<2> |
|
| 82 |
<_rangeEnd> |
|
| 83 |
<value> |
|
| 84 |
<_replace> |
|
| 85 |
<\bca\.?></\bca\.?> |
|
| 86 |
<value>$elev_min_m</value> |
|
| 87 |
</_replace> |
|
| 88 |
</value> |
|
| 89 |
</_rangeEnd> |
|
| 90 |
</2> |
|
| 91 |
</_alt> |
|
| 86 | 92 |
</value> |
| 87 | 93 |
</_units> |
| 88 | 94 |
</to> |
| inputs/SALVIAS/maps/VegBIEN.plots.csv | ||
|---|---|---|
| 1 | 1 |
SALVIAS,VegBIEN:,Comments |
| 2 | 2 |
plot_area_ha,/location/area,"Brad: Area in hectares. Is there any way to store units?; Aaron: VegX plot area annotation says ""Total area of the plot in square meters."" so units are fixed" |
| 3 | 3 |
Elev,"/location/elevation/_alt/1/_replace:[""\bca\.?""=]/value",Brad: Mean elevation in meters. This is a constrained decimal value; is there no place for this in VegX other than verbatimElevation? Check with Nick. |
| 4 |
elev_max_m,"/location/elevation/_alt/2/_avg/max/_units:[default=m,to=m,to=]/value/_rangeEnd/value/_replace:[""\bca\.?""=]/value",
|
|
| 4 |
elev_max_m,"/location/elevation/_alt/2/_avg/max/_units:[default=m,to=m,to=]/value/_replace:[""\bca\.?""=]/value", |
|
| 5 | 5 |
elev_min_m,"/location/elevation/_alt/2/_avg/min/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 6 | 6 |
elev_min_m,"/location/elevationrange/_range/from/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 7 |
elev_max_m,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_rangeEnd/value/_replace:[""\bca\.?""=]/value", |
|
| 7 |
elev_max_m,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_alt/1/_replace:[""\bca\.?""=]/value", |
|
| 8 |
elev_min_m,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_alt/2/_rangeEnd/value/_replace:[""\bca\.?""=]/value", |
|
| 8 | 9 |
LatDec,"/location/locationdetermination/latitude/_alt/1/_nullIf:[null=0,type=float]/value", |
| 9 | 10 |
LongDec,"/location/locationdetermination/longitude/_alt/1/_nullIf:[null=0,type=float]/value", |
| 10 | 11 |
pol2,"/location/locationdetermination/namedplace_id/_simplifyPath:[next=""parent_id/namedplace"",require=placename]/path/_forEach:[in:[],do=""namedplace[rank=_val]/parent_id""]/namedplace[rank=county]/placename",Brad: No pol2=countyParish |
| mappings/VegCSV-VegBIEN.specimens.csv | ||
|---|---|---|
| 1 | 1 |
VegCSV[DwC],VegBIEN:,Comments |
| 2 | 2 |
plotArea,/location/area, |
| 3 | 3 |
verbatimElevation,"/location/elevation/_alt/1/_replace:[""\bca\.?""=]/value", |
| 4 |
maximumElevationInMeters,"/location/elevation/_alt/2/_avg/max/_units:[default=m,to=m,to=]/value/_rangeEnd/value/_replace:[""\bca\.?""=]/value",
|
|
| 4 |
maximumElevationInMeters,"/location/elevation/_alt/2/_avg/max/_units:[default=m,to=m,to=]/value/_replace:[""\bca\.?""=]/value", |
|
| 5 | 5 |
minimumElevationInMeters,"/location/elevation/_alt/2/_avg/min/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 6 | 6 |
minimumElevationInMeters,"/location/elevationrange/_range/from/_units:[default=m,to=m,to=]/value/_rangeStart/value/_replace:[""\bca\.?""=]/value", |
| 7 |
maximumElevationInMeters,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_rangeEnd/value/_replace:[""\bca\.?""=]/value", |
|
| 7 |
maximumElevationInMeters,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_alt/1/_replace:[""\bca\.?""=]/value", |
|
| 8 |
minimumElevationInMeters,"/location/elevationrange/_range/to/_units:[default=m,to=m,to=]/value/_alt/2/_rangeEnd/value/_replace:[""\bca\.?""=]/value", |
|
| 8 | 9 |
landform,/location/landform, |
| 9 | 10 |
coordinateUncertaintyInMeters,/location/locationdetermination/coordsaccuracy/_noCV/value/_alt/1, |
| 10 | 11 |
footprintWKT,/location/locationdetermination/footprintgeometry_dwc, |
| mappings/for_review/VegCSV-VegBIEN.specimens.csv | ||
|---|---|---|
| 5 | 5 |
minimumElevationInMeters,//location/elevation, |
| 6 | 6 |
minimumElevationInMeters,//location/elevationrange, |
| 7 | 7 |
maximumElevationInMeters,//location/elevationrange, |
| 8 |
minimumElevationInMeters,//location/elevationrange, |
|
| 8 | 9 |
landform,//location/landform, |
| 9 | 10 |
coordinateUncertaintyInMeters,//locationdetermination/coordsaccuracy, |
| 10 | 11 |
footprintWKT,//locationdetermination/footprintgeometry_dwc, |
Also available in: Unified diff
mappings/VegCSV-VegBIEN.specimens.csv: maximumElevationInMeters: Fixed bug where _rangeEnd filter needed to be removed because this only works on a field which can be either a range or the start of a range, such as minimumElevationInMeters (on an end-of-range field, a single value will be removed completely). Added _alt for mergeability with DwC. minimumElevationInMeters: Added elevationrange-to mapping using _rangeEnd for mergeability with DwC.