Project

General

Profile

1
# -----------------------------
2
# PostgreSQL configuration file
3
# -----------------------------
4
#
5
# This file consists of lines of the form:
6
#
7
#   name = value
8
#
9
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
10
# "#" anywhere on a line.  The complete list of parameter names and allowed
11
# values can be found in the PostgreSQL documentation.
12
#
13
# The commented-out settings shown in this file represent the default values.
14
# Re-commenting a setting is NOT sufficient to revert it to the default value;
15
# you need to reload the server.
16
#
17
# This file is read on server startup and when the server receives a SIGHUP
18
# signal.  If you edit the file on a running system, you have to SIGHUP the
19
# server for the changes to take effect, or use "pg_ctl reload".  Some
20
# parameters, which are marked below, require a server shutdown and restart to
21
# take effect.
22
#
23
# Any parameter can also be given as a command-line option to the server, e.g.,
24
# "postgres -c log_connections=on".  Some parameters can be changed at run time
25
# with the "SET" SQL command.
26
#
27
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
28
#                MB = megabytes                     s   = seconds
29
#                GB = gigabytes                     min = minutes
30
#                                                   h   = hours
31
#                                                   d   = days
32

    
33

    
34
#------------------------------------------------------------------------------
35
# FILE LOCATIONS
36
#------------------------------------------------------------------------------
37

    
38
# The default values of these variables are driven from the -D command-line
39
# option or PGDATA environment variable, represented here as ConfigDir.
40

    
41
data_directory = '/var/lib/postgresql/9.1/main'		# use data in another directory
42
					# (change requires restart)
43
hba_file = '/etc/postgresql/9.1/main/pg_hba.conf'	# host-based authentication file
44
					# (change requires restart)
45
ident_file = '/etc/postgresql/9.1/main/pg_ident.conf'	# ident configuration file
46
					# (change requires restart)
47

    
48
# If external_pid_file is not explicitly set, no extra PID file is written.
49
external_pid_file = '/var/run/postgresql/9.1-main.pid'		# write an extra PID file
50
					# (change requires restart)
51

    
52

    
53
#------------------------------------------------------------------------------
54
# CONNECTIONS AND AUTHENTICATION
55
#------------------------------------------------------------------------------
56

    
57
# - Connection Settings -
58

    
59
listen_addresses = '*'			# what IP address(es) to listen on;
60
					# comma-separated list of addresses;
61
					# defaults to 'localhost', '*' = all
62
					# (change requires restart)
63
port = 5432				# (change requires restart)
64
max_connections = 100			# (change requires restart)
65
# Note:  Increasing max_connections costs ~400 bytes of shared memory per 
66
# connection slot, plus lock space (see max_locks_per_transaction).
67
#superuser_reserved_connections = 3	# (change requires restart)
68
unix_socket_directory = '/var/run/postgresql'		# (change requires restart)
69
#unix_socket_group = ''			# (change requires restart)
70
#unix_socket_permissions = 0777		# begin with 0 to use octal notation
71
					# (change requires restart)
72
#bonjour_name = ''			# defaults to the computer name
73
					# (change requires restart)
74

    
75
# - Security and Authentication -
76

    
77
#authentication_timeout = 1min		# 1s-600s
78
ssl = true				# (change requires restart)
79
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
80
					# (change requires restart)
81
#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
82
#password_encryption = on
83
#db_user_namespace = off
84

    
85
# Kerberos and GSSAPI
86
#krb_server_keyfile = ''
87
#krb_srvname = 'postgres'		# (Kerberos only)
88
#krb_caseins_users = off
89

    
90
# - TCP Keepalives -
91
# see "man 7 tcp" for details
92

    
93
#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
94
					# 0 selects the system default
95
#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
96
					# 0 selects the system default
97
#tcp_keepalives_count = 0		# TCP_KEEPCNT;
98
					# 0 selects the system default
99

    
100

    
101
#------------------------------------------------------------------------------
102
# RESOURCE USAGE (except WAL)
103
#------------------------------------------------------------------------------
104

    
105
# - Memory -
106

    
107
# Must be less than total memory and less than ~95% of SHMMAX
108
# 32-bit Linux (e.g. Ubuntu VM) may support less:
109
# http://www.postgresql.org/message-id/27470.1323837026@sss.pgh.pa.us
110
shared_buffers = 2800MB			# min 128kB
111
					# (change requires restart)
112
#temp_buffers = 8MB			# min 800kB
113
#max_prepared_transactions = 0		# zero disables the feature
114
					# (change requires restart)
115
# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
116
# per transaction slot, plus lock space (see max_locks_per_transaction).
117
# It is not advisable to set max_prepared_transactions nonzero unless you
118
# actively intend to use prepared transactions.
119
work_mem = 256MB				# min 64kB
120
#work_mem = 1MB				# min 64kB
121
maintenance_work_mem = 256MB		# min 1MB
122
#maintenance_work_mem = 16MB		# min 1MB
123
#max_stack_depth = 2MB			# min 100kB
124

    
125
# - Kernel Resource Usage -
126

    
127
#max_files_per_process = 1000		# min 25
128
					# (change requires restart)
129
#shared_preload_libraries = ''		# (change requires restart)
130

    
131
# - Cost-Based Vacuum Delay -
132

    
133
#vacuum_cost_delay = 0ms		# 0-100 milliseconds
134
#vacuum_cost_page_hit = 1		# 0-10000 credits
135
#vacuum_cost_page_miss = 10		# 0-10000 credits
136
#vacuum_cost_page_dirty = 20		# 0-10000 credits
137
#vacuum_cost_limit = 200		# 1-10000 credits
138

    
139
# - Background Writer -
140

    
141
#bgwriter_delay = 200ms			# 10-10000ms between rounds
142
#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
143
#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
144

    
145
# - Asynchronous Behavior -
146

    
147
#effective_io_concurrency = 1		# 1-1000. 0 disables prefetching
148

    
149

    
150
#------------------------------------------------------------------------------
151
# WRITE AHEAD LOG
152
#------------------------------------------------------------------------------
153

    
154
# - Settings -
155

    
156
#fsync = on				# turns forced synchronization on or off
157
##### WARNING: Switching this off may cause data loss.
158
# It is used to improve performance with frequent commits. Each datasource makes
159
# ~10 commits/sec (which will hopefully increase after optimization), and there
160
# can be 10+ datasources running simultaneously, so the 100 commit/sec limit may
161
# be exceeded. See synchronous_commit at
162
# <http://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server#synchronous_commit>
163
#####
164
synchronous_commit = off		# immediate fsync at commit
165
#wal_sync_method = fsync		# the default is the first option 
166
					# supported by the operating system:
167
					#   open_datasync
168
					#   fdatasync
169
					#   fsync
170
					#   fsync_writethrough
171
					#   open_sync
172
#full_page_writes = on			# recover from partial page writes
173
#wal_buffers = 64kB			# min 32kB
174
					# (change requires restart)
175
#wal_writer_delay = 200ms		# 1-10000 milliseconds
176

    
177
#commit_delay = 0			# range 0-100000, in microseconds
178
#commit_siblings = 5			# range 1-1000
179

    
180
# - Checkpoints -
181

    
182
checkpoint_segments = 32		# in logfile segments, min 1, 16MB each
183
#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
184
#checkpoint_timeout = 5min		# range 30s-1h
185
checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
186
#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
187
#checkpoint_warning = 30s		# 0 disables
188

    
189
# - Archiving -
190

    
191
#archive_mode = off		# allows archiving to be done
192
				# (change requires restart)
193
#archive_command = ''		# command to use to archive a logfile segment
194
#archive_timeout = 0		# force a logfile segment switch after this
195
				# number of seconds; 0 disables
196

    
197

    
198
#------------------------------------------------------------------------------
199
# QUERY TUNING
200
#------------------------------------------------------------------------------
201

    
202
# - Planner Method Configuration -
203

    
204
#enable_bitmapscan = on
205
#enable_hashagg = on
206
#enable_hashjoin = on
207
#enable_indexscan = on
208
#enable_mergejoin = on
209
#enable_nestloop = on
210
#enable_seqscan = on
211
#enable_sort = on
212
#enable_tidscan = on
213

    
214
# - Planner Cost Constants -
215

    
216
#seq_page_cost = 1.0			# measured on an arbitrary scale
217
#random_page_cost = 4.0			# same scale as above
218
#cpu_tuple_cost = 0.01			# same scale as above
219
#cpu_index_tuple_cost = 0.005		# same scale as above
220
#cpu_operator_cost = 0.0025		# same scale as above
221
effective_cache_size = 12GB
222
#effective_cache_size = 128MB
223

    
224
# - Genetic Query Optimizer -
225

    
226
#geqo = on
227
#geqo_threshold = 12
228
#geqo_effort = 5			# range 1-10
229
#geqo_pool_size = 0			# selects default based on effort
230
#geqo_generations = 0			# selects default based on effort
231
#geqo_selection_bias = 2.0		# range 1.5-2.0
232

    
233
# - Other Planner Options -
234

    
235
#default_statistics_target = 100	# range 1-10000
236
#constraint_exclusion = partition	# on, off, or partition
237
#cursor_tuple_fraction = 0.1		# range 0.0-1.0
238
#from_collapse_limit = 8
239
#join_collapse_limit = 8		# 1 disables collapsing of explicit 
240
					# JOIN clauses
241

    
242

    
243
#------------------------------------------------------------------------------
244
# ERROR REPORTING AND LOGGING
245
#------------------------------------------------------------------------------
246

    
247
# - Where to Log -
248

    
249
#log_destination = 'stderr'		# Valid values are combinations of
250
					# stderr, csvlog, syslog and eventlog,
251
					# depending on platform.  csvlog
252
					# requires logging_collector to be on.
253

    
254
# This is used when logging to stderr:
255
logging_collector = on
256
#logging_collector = off		# Enable capturing of stderr and csvlog
257
					# into log files. Required to be on for
258
					# csvlogs.
259
					# (change requires restart)
260

    
261
# These are only used if logging_collector is on:
262
#log_directory = 'pg_log'		# directory where log files are written,
263
					# can be absolute or relative to PGDATA
264
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
265
					# can include strftime() escapes
266
#log_truncate_on_rotation = off		# If on, an existing log file of the
267
					# same name as the new log file will be
268
					# truncated rather than appended to.
269
					# But such truncation only occurs on
270
					# time-driven rotation, not on restarts
271
					# or size-driven rotation.  Default is
272
					# off, meaning append to existing files
273
					# in all cases.
274
#log_rotation_age = 1d			# Automatic rotation of logfiles will
275
					# happen after that time.  0 disables.
276
#log_rotation_size = 10MB		# Automatic rotation of logfiles will 
277
					# happen after that much log output.
278
					# 0 disables.
279

    
280
# These are relevant when logging to syslog:
281
#syslog_facility = 'LOCAL0'
282
#syslog_ident = 'postgres'
283

    
284
#silent_mode = off			# Run server silently.
285
					# DO NOT USE without syslog or
286
					# logging_collector
287
					# (change requires restart)
288

    
289

    
290
# - When to Log -
291

    
292
#client_min_messages = notice		# values in order of decreasing detail:
293
					#   debug5
294
					#   debug4
295
					#   debug3
296
					#   debug2
297
					#   debug1
298
					#   log
299
					#   notice
300
					#   warning
301
					#   error
302

    
303
#log_min_messages = warning		# values in order of decreasing detail:
304
					#   debug5
305
					#   debug4
306
					#   debug3
307
					#   debug2
308
					#   debug1
309
					#   info
310
					#   notice
311
					#   warning
312
					#   error
313
					#   log
314
					#   fatal
315
					#   panic
316

    
317
#log_error_verbosity = default		# terse, default, or verbose messages
318

    
319
#log_min_error_statement = error	# values in order of decreasing detail:
320
				 	#   debug5
321
					#   debug4
322
					#   debug3
323
					#   debug2
324
					#   debug1
325
				 	#   info
326
					#   notice
327
					#   warning
328
					#   error
329
					#   log
330
					#   fatal
331
					#   panic (effectively off)
332

    
333
#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
334
					# and their durations, > 0 logs only
335
					# statements running at least this number
336
					# of milliseconds
337

    
338

    
339
# - What to Log -
340

    
341
#debug_print_parse = off
342
#debug_print_rewritten = off
343
#debug_print_plan = off
344
#debug_pretty_print = on
345
#log_checkpoints = off
346
#log_connections = off
347
#log_disconnections = off
348
#log_duration = off
349
#log_hostname = off
350
log_line_prefix = '%t '			# special values:
351
					#   %u = user name
352
					#   %d = database name
353
					#   %r = remote host and port
354
					#   %h = remote host
355
					#   %p = process ID
356
					#   %t = timestamp without milliseconds
357
					#   %m = timestamp with milliseconds
358
					#   %i = command tag
359
					#   %c = session ID
360
					#   %l = session line number
361
					#   %s = session start timestamp
362
					#   %v = virtual transaction ID
363
					#   %x = transaction ID (0 if none)
364
					#   %q = stop here in non-session
365
					#        processes
366
					#   %% = '%'
367
					# e.g. '<%u%%%d> '
368
#log_lock_waits = off			# log lock waits >= deadlock_timeout
369
#log_statement = 'none'			# none, ddl, mod, all
370
#log_temp_files = -1			# log temporary files equal or larger
371
					# than the specified size in kilobytes;
372
					# -1 disables, 0 logs all temp files
373
#log_timezone = unknown			# actually, defaults to TZ environment
374
					# setting
375

    
376

    
377
#------------------------------------------------------------------------------
378
# RUNTIME STATISTICS
379
#------------------------------------------------------------------------------
380

    
381
# - Query/Index Statistics Collector -
382

    
383
#track_activities = on
384
#track_counts = on
385
#track_functions = none			# none, pl, all
386
#track_activity_query_size = 1024
387
#update_process_title = on
388
#stats_temp_directory = 'pg_stat_tmp'
389

    
390

    
391
# - Statistics Monitoring -
392

    
393
#log_parser_stats = off
394
#log_planner_stats = off
395
#log_executor_stats = off
396
#log_statement_stats = off
397

    
398

    
399
#------------------------------------------------------------------------------
400
# AUTOVACUUM PARAMETERS
401
#------------------------------------------------------------------------------
402

    
403
#autovacuum = on			# Enable autovacuum subprocess?  'on' 
404
					# requires track_counts to also be on.
405
#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
406
					# their durations, > 0 logs only
407
					# actions running at least this number
408
					# of milliseconds.
409
#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
410
#autovacuum_naptime = 1min		# time between autovacuum runs
411
#autovacuum_vacuum_threshold = 50	# min number of row updates before
412
					# vacuum
413
#autovacuum_analyze_threshold = 50	# min number of row updates before 
414
					# analyze
415
#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
416
#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
417
#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
418
					# (change requires restart)
419
#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
420
					# autovacuum, in milliseconds;
421
					# -1 means use vacuum_cost_delay
422
#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
423
					# autovacuum, -1 means use
424
					# vacuum_cost_limit
425

    
426

    
427
#------------------------------------------------------------------------------
428
# CLIENT CONNECTION DEFAULTS
429
#------------------------------------------------------------------------------
430

    
431
# - Statement Behavior -
432

    
433
#search_path = '"$user",public'		# schema names
434
#default_tablespace = ''		# a tablespace name, '' uses the default
435
#temp_tablespaces = ''			# a list of tablespace names, '' uses
436
					# only default tablespace
437
#check_function_bodies = on
438
#default_transaction_isolation = 'read committed'
439
#default_transaction_read_only = off
440
#session_replication_role = 'origin'
441
#statement_timeout = 0			# in milliseconds, 0 is disabled
442
#vacuum_freeze_min_age = 50000000
443
#vacuum_freeze_table_age = 150000000
444
#xmlbinary = 'base64'
445
#xmloption = 'content'
446

    
447
# - Locale and Formatting -
448

    
449
datestyle = 'iso, mdy'
450
#intervalstyle = 'postgres'
451
#timezone = unknown			# actually, defaults to TZ environment
452
					# setting
453
#timezone_abbreviations = 'Default'     # Select the set of available time zone
454
					# abbreviations.  Currently, there are
455
					#   Default
456
					#   Australia
457
					#   India
458
					# You can create your own file in
459
					# share/timezonesets/.
460
#extra_float_digits = 0			# min -15, max 2
461
#client_encoding = sql_ascii		# actually, defaults to database
462
					# encoding
463

    
464
# These settings are initialized by initdb, but they can be changed.
465
lc_messages = 'en_US.UTF-8'			# locale for system error message
466
					# strings
467
lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
468
lc_numeric = 'en_US.UTF-8'			# locale for number formatting
469
lc_time = 'en_US.UTF-8'				# locale for time formatting
470

    
471
# default configuration for text search
472
default_text_search_config = 'pg_catalog.english'
473

    
474
# - Other Defaults -
475

    
476
#dynamic_library_path = '$libdir'
477
#local_preload_libraries = ''
478

    
479

    
480
#------------------------------------------------------------------------------
481
# LOCK MANAGEMENT
482
#------------------------------------------------------------------------------
483

    
484
#deadlock_timeout = 1s
485
#max_locks_per_transaction = 64		# min 10
486
					# (change requires restart)
487
# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
488
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
489
# lock table slots.
490

    
491

    
492
#------------------------------------------------------------------------------
493
# VERSION/PLATFORM COMPATIBILITY
494
#------------------------------------------------------------------------------
495

    
496
# - Previous PostgreSQL Versions -
497

    
498
#add_missing_from = off
499
#array_nulls = on
500
#backslash_quote = safe_encoding	# on, off, or safe_encoding
501
#default_with_oids = off
502
#escape_string_warning = on
503
#regex_flavor = advanced		# advanced, extended, or basic
504
#sql_inheritance = on
505
#standard_conforming_strings = off
506
#synchronize_seqscans = on
507

    
508
# - Other Platforms and Clients -
509

    
510
#transform_null_equals = off
511

    
512

    
513
#------------------------------------------------------------------------------
514
# CUSTOMIZED OPTIONS
515
#------------------------------------------------------------------------------
516

    
517
#custom_variable_classes = ''		# list of custom variable class names
(10-10/25)