bugfix: /README.TXT: Full database import: to import just a subset of the datasources: array env var needs to be set after opening the `screen` shell because array vars are apparently not inherited by the `screen` shell

/README.TXT: Full database import: to import just a subset of the datasources: added step to set custom import name

/README.TXT: Full database import: added instructions for importing just a subset of the datasources

/README.TXT: Full database import: disk space: added high-water mark of 1.8 TB @11:15:05

/README.TXT: Full database import: added steps to figure out which datasource tables were not successfully imported due to disk space errors

fix: /README.TXT: Full database import: moved verification of exit statuses before verification of DB contents because there is no point in verifying the DB if the datasources didn't finish importing

/README.TXT: Full database import: disk space: documented that the entire disk again gets used long after the beginning of the import, when only a few datasources are running (ie. it definitely seems to be a recent bug in Postgres, and not a latent problem)

/README.TXT: Maintenance: added task to regularly re-run full-database import so that bugs in it don't pile up. it needs to be kept in working order so that it works when it's needed.

/README.TXT: Full database import: added steps to manually reimport the applicable datasources if there are errors due to exceeding available disk space

/README.TXT: Full database import: removed extra `ssh -t vegbiendev.nceas.ucsb.edu` before "upload logs", because the previous steps also occur on vegbiendev

/README.TXT: Notes on system stability: added recommendation to maintain a snapshot copy of the VM as it was at the last successful import, for fallback use if a system upgrade breaks anything. system upgrades on the snapshot VM should be disabled completely, and because this will also disable security fixes, the snapshot VM should be disconnected from the internet and all networking interfaces. (this is an unfortunate consequence of modern OSes being written in non-memory-safe languages such as C and C++.)

/README.TXT: Full database import: disk space: documented that a higher high-water mark actually occurs later in the import, so that the disk usage issue actually remains a problem after the very beginning

fix: /README.TXT: Full database import: disk space: increased the minimum free space recommendation to 1 TB, because analysis of the disk usage during the beginning of the import shows that actually close to the entire amount is being used. however, this problem is normally undetectable unless the disk space is specifically checked, because it only manifests itself if the available disk space is exceeded completely.

/README.TXT: Full database import: documented that the beginning of the import should be scheduled at a time when the DB will not be needed for other uses, because vegbiendev will be slow for the first few hours of the import due to the import using all the available cores

/README.TXT: Full database import: documented that CPU load warning e-mails can safely be ignored. they happen because the parallel imports use all the available cores.

/README.TXT: Full database import: exiting `screen`: clarify that you must use `exit`, as Ctrl+D gets disabled to prevent accidental exits

/README.TXT: Full database import: added step to restart Postgres to free up any disk space used by temp tables from the last import (this is apparently not automatically reclaimed)

/README.TXT: Full database import: disk space: increased minimum requirement to 500GB (~200GB extra), as the import may use significant additional space for temp tables

/README.TXT: Full database import: documented that env vars set before invoking `screen` will be inherited by it, so these steps will work even if they come before `screen`

/README.TXT: Full database import: added steps to set a custom version, if the auto-assigned one would cause a collision with the last import

/README.TXT: Full database import: `unset version`: documented that this is needed because it may have been set in the outer shell

/README.TXT: Full database import: disk space: updated schema size (315GB)

/README.TXT: Full database import: removed `up` on jupiter because this is done as part of "do steps under Maintenance > "to synchronize vegbiendev, ..."

/README.TXT: Full database import: moved "do steps under Maintenance > "to synchronize vegbiendev, ..." outside of "On local machine" because these steps don't only take place on the local machine

/README.TXT: use `up` instead of `svn up --force` for consistency

fix: /README.TXT: always use `up` instead of `svn up` since this includes --force

/README.TXT: Full database import: removed unneeded `ssh -t vegbiendev.nceas.ucsb.edu exec sudo su - aaronmk` at beginning since this is performed again the first time it's needed

fix: /README.TXT: Full database import: removed erroneous line that resulted from a search-and-replace of connection commands in r12396. (it used to read "Follow the steps under Connecting to vegbiendev above, using jupiter instead". this step is now performed on the line below it.)

/README.TXT: moved "to back up e-mails" and "to back up the version history" before settings backup so that the local backup of these is up to date when everything gets backed up

/README.TXT: to synchronize vegbiendev, jupiter, and your local machine: backups/TNRS.backup: do this before the general sync so that any reverse sync that's needed won't include it

/README.TXT: to synchronize vegbiendev, jupiter, and your local machine: backups/TNRS.backup: use bin/sync_upload now that this works for rsync-ignored files

fix: /README.TXT: to synchronize vegbiendev, jupiter, and your local machine: run `up` on all machines, not just jupiter, because all must be up-to-date to avoid extraneous diffs

bugfix: /README.TXT: to synchronize vegbiendev, jupiter, and your local machine: `svn up` on jupiter: need to use up alias because that adds --force

bugfix: /README.TXT: to synchronize vegbiendev, jupiter, and your local machine: added `svn up` on jupiter: needs to be in main dir (~/bien), not ~/Dropbox/svn/

/README.TXT: to synchronize vegbiendev, jupiter, and your local machine: added `svn up` on jupiter to avoid extraneous diffs when rsyncing

/README.TXT: Schema changes: manually apply schema changes to the live public schema: moved under "update mappings and staging table column names" because this is a necessary part of that step

/README.TXT: Schema changes: manually apply schema changes to the live public schema: moved under "update mappings and staging table column names" because this is a necessary part of that step

/README.TXT: Schema changes: changed "update staging table column names" to "update mappings and staging table column names"

/README.TXT: `make inputs/{NVS,SALVIAS,TEAM}/test`: updated runtime (1 min)

/README.TXT: calls to `inputs/run postprocess`: direct user to refer to inputs/run for this, so the runtime doesn't have to be updated in multiple places

/README.TXT: Schema changes: added steps to update staging table column names on the local machine and vegbiendev

/README.TXT: Maintenance: VegCore data dictionary: `make inputs/{NVS,SALVIAS,TEAM}/test`: recorded runtime (30 s)

/README.TXT: Maintenance: VegCore data dictionary: `make inputs/{NVS,SALVIAS,TEAM}/test`: prepended `time` to enable obtaining the runtime

/README.TXT: Maintenance: VegCore data dictionary: `inputs/run postprocess`: updated runtime (20 min)

inputs/run: postprocess(): documented runtime (30 min)

bugfix: /README.TXT: Maintenance: VegCore data dictionary: apply new data dict mappings: need to use postprocess rather than import runscript target, so that the command also works on an svn checkout without the flat files (the flat files are not needed for the staging table renaming)

bugfix: /README.TXT: Maintenance: VegCore data dictionary: apply new data dict mappings: need to use import rather than mappings runscript target, to rename the staging tables

bugfix: /README.TXT: Maintenance: VegCore data dictionary: also need to apply new data dict mappings on vegbiendev

fix: /README.TXT: Maintenance: VegCore data dictionary: added steps to apply the new data dictionary mappings to the datasource mappings and staging tables

/Makefile: added separate phppgadmin-Linux target to avoid needing to run the entire postgres-Linux target whenever http://vegbiendev.nceas.ucsb.edu/phppgadmin/ goes down (after some system updates)

/README.TXT: use full hostname for jupiter so the commands work outside of the NCEAS network as well

fix: /README.TXT: use exact ssh command needed to connect to vegbiendev/jupiter (eg. `ssh -t vegbiendev.nceas.ucsb.edu exec sudo su - aaronmk`) instead of vaguely referring to "on vegbiendev"/"on jupiter"

/README.TXT: Full database import: screen: run `unset TMOUT` first because it is most important, now that the remote servers have a TMOUT set for extra security

/README.TXT: to back up the version history: added steps to sync git to the local machine

/README.TXT: Schema changes: clarified that the staging tables should only be reinstalled if needed

/README.TXT: put ... around all uppercased text, for consistency

bugfix: /README.TXT: Full database import: Check that source contains [# datasources] rows up through XAL: added alternative verification method when this is not the case (some datasources may be near the end depending on import order)

/README.TXT: to back up the version history: added back `git svn fetch` so we keep the git export up-to-date, too

/README.TXT: to back up the version history: added runtimes (1.5 h for the initial svnsync)

/README.TXT: to back up the version history: added trailing /s to dirs

bugfix: /README.TXT: to back up the version history: fixed svn_repo/ path

/README.TXT: to back up the version history: use svnsync instead of `git svn fetch`, so that the backup is in a format that can be directly reimported into an svn repo

/README.TXT: Full database import: `make test by_col=1`: documented runtime (20 min)

/README.TXT: Full database import: `. bin/import_all`: documented how to view progress

/README.TXT: to back up the version history: added steps to sync the git repository to jupiter and the local machine

/README.TXT: added steps to back up the version history

/README.TXT: Notes on running programs: added warning that you should always start with a clean shell to avoid spurious bugs

/README.TXT: Testing: added pointer to development machine specs

moved everything into /trunk/ to create the standard svn layout, for use with tools that require this (eg. git-svn). IMPORTANT: do NOT do an `svn up`. instead, re-use your working copy's existing files with `svn switch` (http://svnbook.red-bean.com/en/1.6/svn.ref.svn.c.switch.html).

/README.TXT: added note that shell scripts should always be read-only, so that editing them while an import is in progress will not crash the import (see http://vegpath.org/links/#**%20modifying%20a%20running%20shell%20script)

/README.TXT: to synchronize a Mac's settings with my testing machine's: added step to remove the downloaded Spam folder, because spam e-mails often contain viruses that would trigger clamscan

/README.TXT: Full database import: documented that you should always start with a clean shell, which does not have changes to the env vars. (there have been inexplicable bugs that went away after closing and reopening the terminal window.) note that running `exec bash` is not sufficient to reset the env vars.

/README.TXT: Full database import: backups: added step to download backup to local machine

/README.TXT: Full database import: In PostgreSQL: documented that the tables to check are located in the r# schema, not public

/README.TXT: Datasource setup: added steps to backup e-mails

bugfix: /README.TXT: Full database import: To restart an aborted import for a specific table: run the two commands in errexit mode so that the datasource does not incorrectly have the temp suffix removed if the import command exited with an error

bugfix: /README.TXT: Full database import: To restart an aborted import for a specific table: added command to remove the temp suffix from the source table entry, which is not automatic for importing a specific table (only for importing the entire datasource, at the end of which the datasource is considered completely imported and ready to overwrite any previous import)

/README.TXT: Full database import: documented that `make schemas/reinstall` requires sudo access

/README.TXT: Full database import: verifying import: In PostgreSQL: don't include current values of the datasource counts, etc., because these may change and should always be re-checked at wiki.vegpath.org/VegBIEN_contents

bugfix: /README.TXT: to backup files not in Time Machine: PostgreSQL: need to run with `overwrite=1` so removed files are also deleted

/README.TXT: to backup files not in Time Machine: PostgreSQL: only stop PostgreSQL after all files have been copied, to minimize the time that the PostgreSQL server is down (the final copy just copies concurrent changes)

/README.TXT: to backup files not in Time Machine: PostgreSQL: only stop PostgreSQL after all files have been copied, to minimize the time that the PostgreSQL server is down (the final copy just copies concurrent changes)

/README.TXT: updated to PostgreSQL 9.3

/README.TXT: Full database import: after import: record the import times in inputs/import.stats.xls: documented that this should be run on the local machine, because it needs the Mac filename ordering

/README.TXT: Full database import: after import: removed step to install analytical_stem on nimoy because the import mechanism is not set up to do this (we don't generate CSV exports of the full analytical_stem table because they take up a lot of space and are not currently used for anything)

/README.TXT: Full database import: after import: In PostgreSQL: added step to check that analytical_stem contains the expected # of rows

/README.TXT: Full database import: after import: In PostgreSQL: added specific instructions for determining which/how many datasources are expected to be included in the provider_count and source tables

/README.TXT: for each task, documented which machine it's run on. for tasks run on vegbiendev, added pointer to "Connecting to vegbiendev" steps.

/README.TXT: added instructions for connecting to vegbiendev

/README.TXT: Single datasource import: added pointer to instructions to remake the analytical DB (also required after single datasource import)

/README.TXT: Maintenance: to synchronize vegbiendev, jupiter, and your local machine: run all sync_uploads on the svn working copy using --size-only, because the mtimes are based on when the files were last updated by svn and are not meaningful

/README.TXT: Full database import: On local machine: do steps under Maintenance > "to synchronize vegbiendev, jupiter, and your local machine": removed no longer accurate indicator that these steps are above Full database import, since Full database import is now at the beginning of the file

/README.TXT: Datasource setup: added link to Example steps for a datasource (wiki.vegpath.org/Import_process_for_Madidi)

/README.TXT: Full database import: To remake analytical DB: added runtime (13 h)

/README.TXT: Datasource setup: additional steps for new-style datasources: added steps not present in http://wiki.vegpath.org/Adding_new-style_import_to_a_datasource because they were performed all at once for all datasources

/README.TXT: Datasource setup: added additional steps for new-style datasources, from http://wiki.vegpath.org/Adding_new-style_import_to_a_datasource

bugfix: /README.TXT: to backup files not in Time Machine: need to use -E option to sudo to preserve env, after installing the latest system update

/README.TXT: Single datasource import: removed rescrub step because this is not needed by the current TNRS process

/README.TXT: Full database import: added Running individual steps separately label for the section that is not part of the main import, but is useful if the import is aborted part of the way through

/README.TXT: moved Single datasource import, Datasource setup to top since these are the most important howtos