Project

General

Profile

Activity

From 06/15/2013 to 07/14/2013

07/14/2013

06:02 AM Revision 10284: mappings/VegCore.htm: Regenerated from wiki
Aaron Marcuse-Kubitza
05:52 AM Revision 10283: bugfix: bin/*: spell out [:alnum:] as [a-zA-Z0-9] because Python unfortunately doesn't support character classes
Aaron Marcuse-Kubitza
05:18 AM Revision 10282: web/links/index.htm: updated to Firefox bookmarks. moved Linux, Mac into Unix folder. added instructions to remove old Linux kernels, which fill up the /boot partition. added instructions to force sed to use raw binary mode instead of UTF-8 when UTF-8 is set in the environment. added methods of implementing DB disk space quotas in Postgres. added comparison on my Mac's CPU (2.66 GHz Intel Core i5) with vegbiendev's (2.44 GHz AMD Phenom X4). my Mac's seems to be much faster, so it might make sense to check that the Thor CPUs are faster than the Vis Lab computers' CPUs the next time it gets upgraded. (these diffs can be seen in WinMerge with Moved block detection on. see /README.TXT > WinMerge setup for details.)
Aaron Marcuse-Kubitza
04:43 AM Revision 10281: inputs/bien_web/observation/VegBIEN.csv: regenerated now that *_index dummy columns have been removed
Aaron Marcuse-Kubitza
03:26 AM Revision 10280: inputs/.TNRS/schema.sql: tnrs_populate_fields(): updated runtimes. it now takes 25 min instead of 16 min to regenerate the derived cols.
Aaron Marcuse-Kubitza
03:07 AM Revision 10279: inputs/IRMNG/_README.TXT: added note that when refreshing this datasource, remember to regenerate the TNRS derived cols using the instructions in inputs/.TNRS/schema.sql > tnrs_populate_fields()
Aaron Marcuse-Kubitza
02:44 AM Revision 10278: bin/*: replaced confusing regexp constructs involving \W inside [] with the much clearer explicit character class [:alnum:] . this avoids adding or subtracting from an inverted class in order to reach a subset of the corresponding positive class, because the subset can just be named explicitly instead.
Aaron Marcuse-Kubitza
02:38 AM Revision 10277: bugfix: bin/repl: doesn't make sense to use other chars in a [^\W_] regexp, because they will have no effect since \w doesn't include the other chars to begin with. this is a result of confusion with the ^ and \W double negative.
Aaron Marcuse-Kubitza
02:14 AM Revision 10276: lib/runscripts/table.run: postprocess(): propagate the $remake flag to remake_VegBIEN_mappings using self_make, so that a remake=1 on postprocess will cause map.csv to be regenerated as it would for a remake=1 directly on remake_VegBIEN_mappings
Aaron Marcuse-Kubitza
02:10 AM Revision 10275: bugfix: postprocess(): moved $can_test flag from import() to this function because it is used here
Aaron Marcuse-Kubitza
02:08 AM Revision 10274: lib/runscripts/table.run: import(): moved postprocessing commands to separate postprocess() function that can be invoked on an already-imported staging table to avoid running the load_data() target. this is especially useful when running the postprocessing on a working copy without the unversioned data files, for datasources whose load_data() target would otherwise try to download the files because they don't already exist.
Aaron Marcuse-Kubitza
02:01 AM Revision 10273: lib/runscripts/table.run: postprocess(): renamed to custom_postprocess() since this runs only the datasource's custom postprocessing commands, not all the postprocessing commands including map_table, mk_derived
Aaron Marcuse-Kubitza
01:52 AM Revision 10272: lib/runscripts/util.run: added , function, which treats each of the command-line args as commands the way make does (instead of as args to the same command, the way runscripts do)
Aaron Marcuse-Kubitza
01:39 AM Revision 10271: lib/sh/util.sh: moved runscript-related commands to lib/runscripts/util.run because these only apply to runscripts
Aaron Marcuse-Kubitza
01:26 AM Revision 10270: bugfix: inputs/*/*/map.csv (e.g. inputs/GBIF/raw_occurrence_record_plants/map.csv): remapped author to scientificNameAuthorship rather than authors, which it had gotten incorrectly automapped to. note that the VegCore term authors has now been renamed to data_authors to avoid ambiguity, but incorrect automappings resulting from it had not yet been fixed.
Aaron Marcuse-Kubitza
12:54 AM Revision 10269: bugfix: inputs/GBIF/raw_occurrence_record_plants/run: updated herbaria.ih column names for staging table column renaming
Aaron Marcuse-Kubitza
12:33 AM Revision 10268: bugfix: inputs/GBIF/table.run: need to include lib/runscripts/mysql.table.run instead of table.run (table.run was accidentally substituted when inputs/.NCBI/table.run was copied to all new-style datasources
Aaron Marcuse-Kubitza

07/13/2013

10:35 PM Revision 10267: backups/Makefile: %.backup/restore: documented runtime (11 h; ~5 h to insert data). note that this is still much shorter than re-running column-based import.
Aaron Marcuse-Kubitza

07/12/2013

11:40 PM Revision 10266: planning/workflow/bien3_architecture.pptx: exported from bien3_architecture.odp, as requested by Martha. the .pptx format is buggy and doesn't show the slide thumbnails on the slide notes view, but will have to do as .ppt (the older MS PowerPoint format) doesn't support the graphics.
Aaron Marcuse-Kubitza

07/11/2013

04:08 PM Revision 10265: planning/workflow/bien3_architecture.odp: added wiki page notes (wiki.vegpath.org/2013-06-20_conference_call, wiki.vegpath.org/2013-06-27_conference_call) in the slide notes
Aaron Marcuse-Kubitza
03:41 PM Revision 10264: planning/workflow/bien3_architecture.odp: added responses to the red-highlighted questions (from e-mails to the list) in the slide notes
Aaron Marcuse-Kubitza
02:54 PM Revision 10263: planning/timeline/timeline.2013.xls: fixed formatting: removed internal cell borders in spacer lines
Aaron Marcuse-Kubitza
02:48 PM Revision 10262: added planning/workflow/bien3_architecture.odp with changes from Skype call with Martha, which include wiki page notes (wiki.vegpath.org/2013-06-20_conference_call) about the refactor-in-place method in the Notes area
Aaron Marcuse-Kubitza
02:44 PM Revision 10261: planning/timeline/timeline.2013.xls: updated with changes from Skype call with Martha
Aaron Marcuse-Kubitza
12:53 PM Revision 10260: inputs/*/ which do not contain any explicit collisions (wiki.vegpath.org/2013-06-27_conference_call#To-do-for-Aaron > #3.2 > the following datasources ...): switched to new-style import, which adds the staging table column renaming
Aaron Marcuse-Kubitza
12:41 PM Revision 10259: inputs/newWorld/: switched to new-style import, which adds the staging table column renaming. these tables are used by the public schema (schemas/vegbien.sql), so the renamings are applied there as well.
Aaron Marcuse-Kubitza
12:26 PM Revision 10258: inputs/bien_web/bien_web.schema.sql: regenerated using bin/my2pg, to remove the *_index dummy columns so they don't create lots of OMIT#... staging table columns
Aaron Marcuse-Kubitza
12:09 PM Revision 10257: inputs/*/*/map.csv: added distinguishing #... suffix (e.g. UNUSED#institutionID) to the special terms OMIT, PRIVATE, UNUSED (VegCore.vegpath.org#Special-terms) to avoid creating a collision in the staging table renaming
Aaron Marcuse-Kubitza
11:56 AM Revision 10256: bugfix: inputs/input.Makefile: Staging tables installation: $(allInstalls): don't filter out Source table, because it is now an installed table rather than just a mapping
Aaron Marcuse-Kubitza
11:33 AM Revision 10255: bin/filter_out_ci, lib/maps.py: simplify(): also remove distinguishing #... suffix from terms (e.g. UNUSED#institutionID), to support mapping multiple columns to the special terms OMIT, PRIVATE, UNUSED (VegCore.vegpath.org#Special-terms), *without* creating a collision in the staging table renaming. note that this change must *not* be made to bin/canon, because this would cause suffixed terms to be autorenamed to their *un*suffixed VegCore versions.
Aaron Marcuse-Kubitza
05:54 AM Revision 10254: backups/Makefile: $(restore): added --verbose to display pg_restore's incremental progress
Aaron Marcuse-Kubitza
05:34 AM Revision 10253: bugfix: inputs/newWorld/newWorldCountries/postprocess.sql: use UPDATE statement (followed by VACUUM ANALYZE to remove dead tuples) instead of in-place update (ALTER COLUMN TYPE USING), so that the statement can be run even after the public schema has been installed and its views use the columns. (a view using the columns would normally block an ALTER COLUMN TYPE statement on a referenced column.)
Aaron Marcuse-Kubitza
03:56 AM Revision 10252: bugfix: lib/runscripts/table.run: remake_VegBIEN_mappings(): when remaking, do not remake header.csv, because it should keep the original CSV columns rather than being reset to whatever the current staging table columns happen to be. to force-regenerate this, instead delete it first and then run remake_VegBIEN_mappings(). remake mode will now just regenerate map.csv from header.csv, in case map.csv's columns are incomplete or out of order.
Aaron Marcuse-Kubitza
03:55 AM Revision 10251: bugfix: lib/runscripts/table.run: remake_VegBIEN_mappings(): when remaking, do not remake header.csv, because it should keep the original CSV columns rather than being reset to whatever the current staging table columns happen to be. to force-regenerate this, instead delete it first and then run remake_VegBIEN_mappings(). remake mode will now just regenerate map.csv from header.csv, in case map.csv's columns are incomplete or out of order.
Aaron Marcuse-Kubitza
03:50 AM Revision 10250: bugfix: lib/runscripts/table.run: map_table(): do not rename view columns, since their column names come from their (column-renamed) joined tables rather than from a map.csv. header.csv, map.csv for views will generally become out-of-date whenever the joined tables change, so it is better not to generate them at all.
Aaron Marcuse-Kubitza
03:48 AM Revision 10249: lib/runscripts/table.run: added $is_view
Aaron Marcuse-Kubitza
03:27 AM Revision 10248: lib/runscripts/table.run: added $postprocess_sql to store postprocess.sql path, and use it in postprocess()
Aaron Marcuse-Kubitza
02:20 AM Revision 10247: bugfix: lib/sh/local.sh: prevent automated tests when the public schema contains the live DB, so the user doesn't have to explicitly specify can_test= when running the import on vegbiendev
Aaron Marcuse-Kubitza
02:19 AM Revision 10246: bugfix: lib/runscripts/table.run: import(): allow automated tests (remake_VegBIEN_mappings) to be disabled by setting can_test= if the public schema shouldn't be modified (e.g. if it's the live DB)
Aaron Marcuse-Kubitza
12:55 AM Revision 10245: bugfix: inputs/*/*/postprocess.sql: made all operations idempotent, so that postprocess.sql can be run repeatedly (e.g. by new-style import)
Aaron Marcuse-Kubitza
12:03 AM Revision 10244: schemas/util.sql: create_if_not_exists(): also suppress "multiple primary keys are not allowed" error
Aaron Marcuse-Kubitza

07/10/2013

10:10 PM Revision 10243: added inputs/newWorld/iso_code_gadm/.map.csv.last_cleanup
Aaron Marcuse-Kubitza
10:07 PM Revision 10242: inputs/*/Source/VegBIEN.csv: regenerated for new-style import, which uses a symlink to mappings/VegCore-VegBIEN.csv instead of a custom mapping using the original column names
Aaron Marcuse-Kubitza
09:53 PM Revision 10241: inputs/input.Makefile: Staging tables installation: %/install: run %/map_table at end to rename the staging table columns for new-style datasources
Aaron Marcuse-Kubitza
09:52 PM Revision 10240: inputs/input.Makefile: Staging tables installation: added %/map_table to run the new-style import staging table renaming
Aaron Marcuse-Kubitza
08:37 PM Revision 10239: inputs/bien2_traits/TraitObservation/map.csv: removed no longer needed mappings of dummy columns to OMIT, which were creating an unnecessary collision of staging table column names
Aaron Marcuse-Kubitza
08:30 PM Revision 10238: inputs/bien2_traits/bien2_staging.schema.sql: regenerated from MySQL version so that dummy columns (which used to be generated by bin/my2pg) will be replaced with dummy CHECK constraints instead. this avoids needing to map several dummy columns all to OMIT, which was creating an unnecessary collision of staging table column names.
Aaron Marcuse-Kubitza
08:20 PM Revision 10237: bin/my2pg*: keep MySQL indefinite dates as text strings instead of translating them (to the first of the month or year) to fit into a PostgreSQL timestamp. this allows the application to decide how to handle these values, which otherwise have no corresponding value in PostgreSQL. this requires changing the date/time related types to text instead of leaving them as-is, so that they can store the custom MySQL strings.
Aaron Marcuse-Kubitza
07:36 PM Revision 10236: planning/timeline/timeline.2013.xls: Geoscrubbing: made it a subtask of Adding derived columns. moved it to July so that it can be run for Naia's new project.
Aaron Marcuse-Kubitza
07:00 PM Revision 10235: planning/timeline/timeline.2013.xls: reordered tasks approximately in priority order (which corresponds to the month(s) in which they are scheduled). indented subtasks under their parent tasks.
Aaron Marcuse-Kubitza
06:51 PM Revision 10234: planning/timeline/timeline.2013.xls: crossed out completed rows and moved them to the bottom
Aaron Marcuse-Kubitza
06:46 PM Revision 10233: planning/timeline/timeline.2013.xls: use different-style checkmark because LibreOffice doesn't display the font of the previous one correctly anymore (it may already have been displayed incorrectly on other people's computers)
Aaron Marcuse-Kubitza
06:14 PM Revision 10232: planning/timeline/timeline.2013.xls: Reload existing data in need of refresh: added Oct because Rick Condit is supposed to provide us with a CTFS refresh that we would be allowed to use (he wouldn't let us use the 2011-4-1 full-DB export)
Aaron Marcuse-Kubitza
06:11 PM Revision 10231: planning/timeline/timeline.2013.xls: continuous tasks: populated past months
Aaron Marcuse-Kubitza
06:09 PM Revision 10230: planning/timeline/timeline.2013.xls: added Sep, Oct months and moved tasks into them. moved continuous tasks to separate section at bottom to avoid confusion with discrete tasks.
Aaron Marcuse-Kubitza
05:33 PM Revision 10229: planning/timeline/timeline.2013.xls: use bullet points (•) instead of background shading to indicate future tasks. this allows cells to easily be cleared by pressing Backspace, rather than having to copy a white-background cell on top of the cell.
Aaron Marcuse-Kubitza
05:26 PM Revision 10228: planning/timeline/timeline.2013.xls: use 3-letter months to make room for more months
Aaron Marcuse-Kubitza
05:23 PM Revision 10227: planning/timeline/timeline.2013.xls: added missing tasks: switching to new-style import, importing to normalized VegCore, adding derived columns
Aaron Marcuse-Kubitza
05:16 PM Revision 10226: planning/timeline/timeline.2013.xls: removed alterate-row color highlighting because it makes it difficult to reorder rows or insert new rows in the middle
Aaron Marcuse-Kubitza
04:51 PM Revision 10225: bin/my2pg: use util.sh $top_dir instead of setting $selfDir
Aaron Marcuse-Kubitza
04:50 PM Revision 10224: bin/my2pg*: use the util.sh sed wrapper, which fixes the LANG=*.UTF-8 "illegal byte sequence" errors on invalid UTF-8
Aaron Marcuse-Kubitza
04:33 PM Revision 10223: /Makefile: mysql-Linux: also install mysql-workbench, for use in modifying the VegCore ERD. (note that it has to be modified on Linux, because the Linux and Mac versions of MySQL Workbench position the lines differently.)
Aaron Marcuse-Kubitza
04:10 PM Revision 10222: /README.TXT: Maintenance: to backup files not in Time Machine: removed VirtualBox VMs because they are now in Time Machine, and do not need to be backed up separately
Aaron Marcuse-Kubitza
04:08 PM Revision 10221: /README.TXT: Maintenance: to synchronize a Mac's settings with my testing machine's: added steps to upload just the VirtualBox VMs
Aaron Marcuse-Kubitza
04:02 PM Revision 10220: bugfix: /README.TXT: Maintenance: to synchronize a Mac's settings with my testing machine's: added overwrite=1 so that old snapshots, etc. are also deleted
Aaron Marcuse-Kubitza
04:01 PM Revision 10219: /README.TXT: Maintenance: to synchronize a Mac's settings with my testing machine's: use better bin/sync_upload instead of put
Aaron Marcuse-Kubitza
03:59 PM Revision 10218: /README.TXT: Maintenance: to synchronize a Mac's settings with my testing machine's: removed no longer needed inplace=1, because the VirtualBox VMs now all use a snapshot covering the full disk, so that the full disk is not altered (removing the need to optimize backing up a large file) and just the diff files need to be backed up each time
Aaron Marcuse-Kubitza
03:41 PM Revision 10217: bugfix: lib/sh/util.sh: sed: must use alias instead of function because function causes segfault in redir() subshell when used with make.sh make() filter (may be bug in bash?). this involves translating `unset LANG` to `env LANG=` (`env -u` to unset a var isn't supported on Mac, but fortunately sed treats LANG="" the same as unset LANG).
Aaron Marcuse-Kubitza
03:06 PM Revision 10216: archived planning/goals/BIEN3_derived_data_products.docx and replaced with symlink to new BIEN_3_derived_data_products_NormalizedDB_only.docx
Aaron Marcuse-Kubitza
02:59 PM Revision 10215: added planning/goals/BIEN_3_derived_data_products_NormalizedDB_only.docx from Brad's e-mail
Aaron Marcuse-Kubitza
02:42 PM Revision 10214: bugfix: lib/sh/util.sh: sed: unset LANG to avoid "illegal byte sequence" errors on invalid UTF-8 for LANG=*.UTF-8. these occur e.g. with MySQL data that is in Latin-1.
Aaron Marcuse-Kubitza
02:36 PM Revision 10213: lib/sh/util.sh: sed: use function instead of alias so that env can be set up before calling sed
Aaron Marcuse-Kubitza
02:15 PM Revision 10212: planning/workflow/bien3_architecture.pptx: updated to Martha's revised version from 2013-7-3
Aaron Marcuse-Kubitza
04:13 AM Revision 10211: lib/runscripts/table.run: map_table(): run map_table repeatedly until no more renames are made: added command to do this
Aaron Marcuse-Kubitza
03:53 AM Revision 10210: lib/runscripts/table.run: map_table(): documented that collisions may prevent all renames from being made at once. if this is the case, map_table must be run repeatedly until no more renames are made. collisions may result if the staging table gets messed up (e.g. due to missing input columns in map.csv).
Aaron Marcuse-Kubitza
02:32 AM Revision 10209: inputs/*/*/map.csv for CSV tables with a row_num column: added missing row_num entry, which is needed by the staging table column renaming to make the order of the map.csv columns match the order in the staging table
Aaron Marcuse-Kubitza
02:27 AM Revision 10208: bugfix: inputs/*/Source/map.csv: added missing row_num entry, which is needed by the staging table column renaming to make the order of the map.csv columns match the order in the staging table. the staging table column renaming is now used by all Source tables.
Aaron Marcuse-Kubitza
02:18 AM Revision 10207: bugfix: populated empty inputs/IUCN/European_Red_List_Plants/header.csv
Aaron Marcuse-Kubitza
02:17 AM Revision 10206: inputs/CTFS/*/map.csv: added *.src.row_num from joined tables so that the map.csv input columns would match the staging table. this is needed for the staging table column renaming, which is positional rather than name-based to work with any existing column name.
Aaron Marcuse-Kubitza
01:50 AM Revision 10205: bugfix: inputs/input.Makefile: map.csv and derived files: use $(tables) instead of $(importTables) when making them so that the mappings of those tables are still kept up-to-date even though they are marked _no_import (and not imported into the main DB)
Aaron Marcuse-Kubitza
01:46 AM Revision 10204: inputs/CTFS/*/test.xml.ref: regenerated. these got out of date because even though these tables are included in import_order.txt, they are marked as _no_import, which prevents map.csvs and derived files from being kept up-to-date.
Aaron Marcuse-Kubitza
01:24 AM Revision 10203: bugfix: inputs/CTFS/*/VegBIEN.csv: regenerated from map.csv. they may have gotten out of date because they are marked as _no_import, even though they *are* in import_order.txt.
Aaron Marcuse-Kubitza

07/09/2013

05:33 PM Revision 10202: bugfix: added missing inputs/MO/Specimen/header.csv
Aaron Marcuse-Kubitza
05:32 PM Revision 10201: bugfix: added missing inputs/QFA/Specimen/header.csv
Aaron Marcuse-Kubitza
05:26 PM Revision 10200: bugfix: inputs/TEX/Specimen/header.csv: generated from staging table (was empty previously)
Aaron Marcuse-Kubitza
04:44 PM Revision 10199: bugfix: inputs/*/Source/map.csv: added missing row_num entry, which is needed by the staging table column renaming to make the order of the map.csv columns match the order in the staging table. the staging table column renaming is now used by all Source tables.
Aaron Marcuse-Kubitza
04:42 PM Revision 10198: added inputs/newWorld/iso_code_gadm/header.csv
Aaron Marcuse-Kubitza
04:31 PM Revision 10197: added inputs/analytical_db/table.run
Aaron Marcuse-Kubitza
02:59 PM Revision 10196: bugfix: inputs/VASCAN/Taxon/map.csv: added missing row_num column added by bin/csv2db
Aaron Marcuse-Kubitza
02:50 PM Revision 10195: lib/sql_io.py: cleanup_table(): added assertion that the table exists, so that if it doesn't, the error will occur as part of an assertion rather than as part of the util.table_nulls_mapped__get() call, which might confusingly lead users to believe that this is a bug in util.table_nulls_mapped__get() when in fact the problem is that the table is not installed
Aaron Marcuse-Kubitza
02:30 AM Revision 10194: fix: inputs/import.stats.xls: removed spurious diff comment on total time, which only applied to the previous import
Aaron Marcuse-Kubitza
02:28 AM Revision 10193: inputs/import.stats.xls: reformatted times longer than one day as a # of days instead of hours, for clarity. the days format is chosen automatically when the # hours exceeds one day.
Aaron Marcuse-Kubitza
01:04 AM Revision 10192: bugfix: inputs/*/Source/: added missing ./run, which creates the new-style staging tables with the metadata fields as part of the table. this is needed now that these subdirs use installed staging tables instead of metadata-only map.csvs.
Aaron Marcuse-Kubitza
12:56 AM Revision 10191: bin/map: removed no longer used support for map.csv input column prefixes (expand out the prefixes instead). this used to be used by SpeciesLink to use just one mapping for a single term with multiple DwC namespaces, but was replaced with an explicit, ordered rather than implicit, unordered /_alt-ing together of the terms.
Aaron Marcuse-Kubitza

07/08/2013

11:47 PM Revision 10190: bin/map: removed no longer accurate comment that this is case- and punctuation-insensitive, since the case- and punctuation-insensitivity is now instead handled by map.csv preprocessing scripts before the mappings are even provided to bin/map
Aaron Marcuse-Kubitza

07/06/2013

07:29 PM Revision 10189: inputs/.herbaria/: switched to new-style import, which renamed the columns to the VegCore names. this is done using the commands at wiki.vegpath.org/2013-06-27_conference_call#To-do-for-Aaron > "run the following for each datasource".
Aaron Marcuse-Kubitza
07:21 PM Revision 10188: lib/sql_io.py: cleanup_table(): don't run the slow ALTER TABLE statement again if the table has already been cleaned up. documented that it is idempotent (and actually was before this change as well).
Aaron Marcuse-Kubitza
07:19 PM Revision 10187: lib/sql_io.py: added table_nulls_mapped__set(), "__get() wrappers around the corresponding util schema functions
Aaron Marcuse-Kubitza
07:18 PM Revision 10186: lib/sql_gen.py: added table2regclass_text()
Aaron Marcuse-Kubitza
07:07 PM Revision 10185: schemas/util.sql: added table_nulls_mapped__get(), which gets whether a table's NULL-equivalent strings have been replaced with NULL
Aaron Marcuse-Kubitza
07:06 PM Revision 10184: schemas/util.sql: added table_flag__get(), which gets whether a status flag is set by the presence of a table constraint
Aaron Marcuse-Kubitza
06:56 PM Revision 10183: schemas/util.sql: added table_nulls_mapped__set(), which sets that a table's NULL-equivalent strings have been replaced with NULL
Aaron Marcuse-Kubitza
06:54 PM Revision 10182: schemas/util.sql: added table_flag__set(), which stores a status flag by the presence of a table constraint
Aaron Marcuse-Kubitza
06:52 PM Revision 10181: schemas/util.sql: create_if_not_exists(): also ignore duplicate_object exceptions, thrown when trying to add a duplicate constraint
Aaron Marcuse-Kubitza
06:00 PM Revision 10180: inputs/input.Makefile: %/postprocess: removed no longer used invocation of $*/import (precursor to the runscripts used in FIA)
Aaron Marcuse-Kubitza
05:39 PM Revision 10179: inputs/*/: added table.run for use by the table subdirs in new-style import. datasources without table subdirs do not need this.
Aaron Marcuse-Kubitza
05:35 PM Revision 10178: inputs/*/: added top-level Makefile which includes inputs/input.Makefile, so that make can be run directly on the datasrc dir without needing to specify `--makefile=../input.Makefile` (see input.Makefile $(selfMake))
Aaron Marcuse-Kubitza
05:17 PM Revision 10177: inputs/*/: added top-level Makefile which includes inputs/input.Makefile, so that make can be run directly on the datasrc dir without needing to specify `--makefile=../input.Makefile` (see input.Makefile $(selfMake))
Aaron Marcuse-Kubitza
05:05 PM Revision 10176: added inputs/test_taxonomic_names/Taxon/header.csv
Aaron Marcuse-Kubitza
04:02 PM Revision 10175: web/links/index.htm: updated to Firefox bookmarks. removed dead favicons. PostgreSQL: added bookmarks about triggers.
Aaron Marcuse-Kubitza
03:55 PM Revision 10174: bugfix: inputs/input.Makefile: %/VegBIEN.csv: for new-style datasources, use a symlink to mappings/VegCore-VegBIEN.csv directly instead of prefiltering VegCore-VegBIEN.csv to include only the columns in map.csv. prefiltering used to be performed as part of mapping the map.csv VegCore output terms to VegBIEN using bin/join, but is no longer needed because the staging table columns are now VegCore terms. instead, the full VegCore-VegBIEN.csv *is* needed so that derived columns added in stage I or II validations are detected by bin/map (rather than just the original source columns in map.csv).
Aaron Marcuse-Kubitza
03:37 PM Revision 10173: mappings/VegCore-VegBIEN.csv: cultivated, oldGrowth: use just cultivated if it's provided, rather than /_alt-ing it back with oldGrowth (which it was generated from)
Aaron Marcuse-Kubitza
03:30 PM Revision 10172: bugfix: mappings/VegCore-VegBIEN.csv: fixed priority of cultivated and oldGrowth so cultivated is used first if it's available
Aaron Marcuse-Kubitza
02:41 PM Revision 10171: bugfix: lib/runscripts/table.run: need to run remake_VegBIEN_mappings after mk_derived rather than before so the derived cols will be included in the automated test result
Aaron Marcuse-Kubitza
02:26 PM Revision 10170: bugfix: inputs/*/Source/: use installed staging table (with blank-line data.csv) in order to also work with new-style import. this also fixes a benign diff between the by-row and by-col test outputs, where row-based import would not import the Source/ entries because there was not at least one row in the input. note that in order to ensure that all datasources are properly run, you need to check `svn st|sort` against the datasource schema names to see if any are missing.
Aaron Marcuse-Kubitza
02:22 PM Revision 10169: inputs/*/logs: updated svn:ignore
Aaron Marcuse-Kubitza
02:22 PM Revision 10168: inputs/*/*/logs: updated svn:ignore
Aaron Marcuse-Kubitza
01:45 PM Revision 10167: bugfix: inputs/input.Makefile: SVN: add: don't add subdirs for datasources marked _no_import (e.g. datasources which only have an inputs/ dir to be listed in VegPath)
Aaron Marcuse-Kubitza
11:29 AM Revision 10166: bugfix: inputs/*/Source/data.csv for new-style datasources: need to include a blank row (plus a blank header) so that the metadata values are imported at least once instead of zero times, now that there is an installed staging table that will be iterated over. the blank row did not used to be necessary, because db_xml.put_table() has a special case for metadata-only tables with no installed table, which avoids iterating over the table's rows.
Aaron Marcuse-Kubitza

07/03/2013

10:48 PM Revision 10165: lib/sql_io.py: put_table() (column-based import): complexity note: clarified that INSERT RETURNING throws an error *on duplicate* instead of returning the existing row. added blank line after ¶ for readability.
Aaron Marcuse-Kubitza
10:44 PM Revision 10164: lib/sql_io.py: put_table() (column-based import): warning about triggers populating unique constraint-covered columns: corrected limitation to include only *the* unique constraint used to do the DISTINCT ON, since other unique constraints are not affected by column-based import. note that the primary key will normally not be the DISTINCT ON constraint, so trigger-populated natural keys are supported *unless* the input table contains duplicate rows for some generated keys.
Aaron Marcuse-Kubitza
10:20 PM Revision 10163: inputs/*/Source/ for new-style datasources: use an actual staging table instead of a metadata-only table, so that metadata values can be stored in the staging table instead of the map.csv (as will be required by new-style import)
Aaron Marcuse-Kubitza
08:21 PM Revision 10162: inputs/input.Makefile: SVN: $(svnFilesGlob): added data.csv, used to store versioned data (such as the empty data.csv used by Source/ tables which have their metadata in the map table instead)
Aaron Marcuse-Kubitza
07:45 PM Revision 10161: schemas/util.sql: type_qual(), type_qual_name(): added comments to distinguish these similarly-named functions, one of which gets a type qualifier and the other of which gets a qualified name (not the name of a type qualifier, which one might otherwise assume)
Aaron Marcuse-Kubitza
07:39 PM Revision 10160: schemas/util.sql: typeof(): support expressions that are not relative to a table (which do not have a table_ param). note that this requires removing the STRICT qualifier, so that NULL expressions will now produce an error instead of passing through as NULL.
Aaron Marcuse-Kubitza
07:10 PM Revision 10159: schemas/VegCore/VegCore.ERD.mwb: relationships legend: removed inheritance of base_class from record, so that the IS-A label would not confusingly appear to apply to the record connector stub instead of to the solid line between base_class and derived_class
Aaron Marcuse-Kubitza
06:51 PM Revision 10158: bugfix: schemas/util.sql: col_names(): need to exclude dropped columns (which remain included in the pg_attribute table until the next tuple rewrite), by filtering on `NOT attisdropped`. lib/sql.py table_col_names() is not affected by this because it is able to access the column names from the DB driver directly, after performing `SELECT * FROM table LIMIT 0`.
Aaron Marcuse-Kubitza
06:38 PM Revision 10157: schemas/util.sql: set_col_names_with_metadata(): don't delete the metadata entries from the map table, because they are now added *before* the renames take place, so that the renames can simply be performed on the constant columns themselves. this does, however, require that the metadata entries are always listed *last* in the map.csv (which is currently the case).
Aaron Marcuse-Kubitza
05:56 PM Revision 10156: lib/runscripts/table.run: map_table(): store the map table in the datasource schema, so that it can easily be referred to when using the staging tables. this also allows it to be found more easily when debugging its contents.
Aaron Marcuse-Kubitza
05:26 PM Revision 10155: lib/sh/db.sh: psql(): hide the verbose CONTEXT information that is output with each NOTICE by setting the VERBOSITY psql var to terse (postgresql.1045698.n5.nabble.com/Quiet-quot-CONTEXT-quot-td1906036.html#a1906037)
Aaron Marcuse-Kubitza
05:15 PM Revision 10154: *{.sh,run}: use new log-() instead of log+() with a negative #
Aaron Marcuse-Kubitza
05:14 PM Revision 10153: lib/sh/util.sh: added log-() because it's non-obvious that you would otherwise have to invoke log+() with a negative #
Aaron Marcuse-Kubitza
05:00 PM Revision 10152: schemas/util.sql: reset_map_table(): drop the table and recreate it instead of just creating it if it doesn't exist, so that any change to the util.map table is propagated to persistent map tables whenever they are reloaded from the map.csv
Aaron Marcuse-Kubitza
05:00 PM Revision 10151: lib/runscripts/table.run: map_table(): create the map table as a persistent table in the temp schema, so that its contents can be viewed for debugging
Aaron Marcuse-Kubitza
04:50 PM Revision 10150: schemas/util.sql: added drop_table()
Aaron Marcuse-Kubitza
04:39 PM Revision 10149: schemas/util.sql: set_col_names(): don't perform rename if the name is not changing, to avoid cluttering the debug output with unnecessary queries
Aaron Marcuse-Kubitza
04:21 PM Revision 10148: lib/runscripts/table.run: use new util.set_col_names_with_metadata() instead of util.set_col_names() so that metadata values (beginning with : ) are automatically mapped to constant columns rather than needing to add a mk_const_col() call to postprocess.sql for each of them. there are a lot of metadata value entries, especially in the Source/ tables for each datasource, so this will save time in translating the datasources to new-style import. note that this requires disabling the map_filter_insert trigger on the map table to prevent it from filtering out the metadata entries before util.set_col_names_with_metadata() can use them.
Aaron Marcuse-Kubitza
03:55 PM Revision 10147: bugfix: schemas/util.sql: set_col_names_with_metadata(): need `util.` before mk_const_col(). "to", "from" need to be referenced from row_. substring() needs to start from 2 rather than 1 because PostgreSQL string indexes are 1-based.
Aaron Marcuse-Kubitza
03:05 PM Revision 10146: schemas/util.sql: try_create(), create_if_not_exists(): use eval() so the executed statement will be echoed for debugging
Aaron Marcuse-Kubitza
02:58 PM Revision 10145: schemas/util.sql: added set_col_names_with_metadata()
Aaron Marcuse-Kubitza

07/02/2013

05:42 PM Revision 10144: bugfix: lib/sh/sync.sh: upload(): paths: don't dereference the path itself if it's a symlink; instead canonicalize just its parent dir. this allows syncing a specific file which is a symlink, rather than syncing the symlink's target.
Aaron Marcuse-Kubitza
05:40 PM Revision 10143: lib/sh/util.sh: added canon_dir_rel_path(), which canonicalizes just the parent dir if the path is a symlink, to leave the symlink itself untouched
Aaron Marcuse-Kubitza
05:08 PM Revision 10142: planning/workflow/validation/: archived BIEN2 validations documents which have been superseded by planning/goals/BIEN3_derived_data_products.docx, to avoid confusion
Aaron Marcuse-Kubitza
04:45 PM Revision 10141: planning/workflow/bien3_architecture.pptx: updated with clarifications made in today's conference call
Aaron Marcuse-Kubitza
02:31 PM Revision 10140: bugfix: bin/map: in_is_db: inline metadata value columns (used by new-style import) so that they can be compared by value in XML simplifying functions (lib/xml_func.py)
Aaron Marcuse-Kubitza
02:29 PM Revision 10139: lib/sql.py: added col_default_value(), col_is_constant(), which interface with corresponding util-schema functions
Aaron Marcuse-Kubitza
02:28 PM Revision 10138: lib/sql_gen.py: added col2col_ref() for interfacing with for SQL functions that take a util.col_ref
Aaron Marcuse-Kubitza
12:57 PM Revision 10137: schemas/util.sql: added is_constant(col_ref), for checking if a column has been marked "constant"
Aaron Marcuse-Kubitza
12:54 PM Revision 10136: schemas/util.sql: added col_comment()
Aaron Marcuse-Kubitza
12:53 PM Revision 10135: schemas/util.sql: mk_const_col(): add column comment "constant" to mark column as inlinable (needed by some mappings to have a literal value to compare)
Aaron Marcuse-Kubitza
12:03 PM Revision 10134: schemas/util.sql: added col_default_value(), which evaluates the col_default_sql() expression
Aaron Marcuse-Kubitza
11:51 AM Revision 10133: schemas/util.sql: added eval_expr_passthru() (passes NULL SQL through)
Aaron Marcuse-Kubitza
11:45 AM Revision 10132: bugfix: schemas/util.sql: eval_expr(): need to pass ret_type_null to eval2val()
Aaron Marcuse-Kubitza
11:42 AM Revision 10131: schemas/util.sql: added eval_expr() (does not require `SELECT ` before expr)
Aaron Marcuse-Kubitza
11:33 AM Revision 10130: schemas/util.sql: added col_default_sql()
Aaron Marcuse-Kubitza
11:26 AM Revision 10129: schemas/util.sql: eval(text, anyelement): added default polymorphic type text (can't be unknown because this would cause a "could not determine polymorphic type because input has type "unknown"" error). renamed to eval2val() to avoid overloading conflicts with eval(text) when no polymorphic type param is specified.
Aaron Marcuse-Kubitza
11:15 AM Revision 10128: schemas/util.sql: added value-returning eval()
Aaron Marcuse-Kubitza
11:02 AM Revision 10127: bugfix: lib/common.Makefile: $(asAdmin): need to use _postgres instead on Mac for OS X 10.8 Mountain Lion
Aaron Marcuse-Kubitza
11:01 AM Revision 10126: bugfix: *Makefile: $(asAdmin) invocations of Postgres commands: need to set DB user to postgres so that it won't default to the system user _postgres
Aaron Marcuse-Kubitza
10:57 AM Revision 10125: *Makefile: removed $(psqlOpts), $(psqlAsAdmin), which are now set by lib/common.Makefile
Aaron Marcuse-Kubitza
10:57 AM Revision 10124: lib/common.Makefile: added $(psqlOpts), $(psqlAsAdmin)
Aaron Marcuse-Kubitza
10:54 AM Revision 10123: bugfix: schemas/pg_hba.Mac.conf: use new postgres ident map instead of changing user to _postgres, because the DB user is still named postgres
Aaron Marcuse-Kubitza
10:53 AM Revision 10122: schemas/pg_ident.Mac.conf: added postgres map mapping the _postgres system user to the postgres DB user for ident authentication
Aaron Marcuse-Kubitza
10:45 AM Revision 10121: /Makefile: $(postgresReload-Darwin): also install pg_ident.Mac.conf
Aaron Marcuse-Kubitza
10:44 AM Revision 10120: placed pg_ident.conf under version control as schemas/pg_ident.Mac.conf
Aaron Marcuse-Kubitza
10:29 AM Revision 10119: *Makefile: removed $(asAdmin), which is now set by lib/common.Makefile
Aaron Marcuse-Kubitza
10:28 AM Revision 10118: lib/common.Makefile: added $(asAdmin)
Aaron Marcuse-Kubitza
10:26 AM Revision 10117: bugfix: schemas/pg_hba.Mac.conf: changed postgres to _postgres for OS X 10.8 Mountain Lion
Aaron Marcuse-Kubitza
09:48 AM Revision 10116: schemas/util.sql: added raise_undefined_column() for use in translating other exceptions to undefined_column
Aaron Marcuse-Kubitza
03:50 AM Revision 10115: bin/map: map_table(): Resolve prefixes: combined db_xml.ColRef() constructor call with creation of args (as tuple) for clarity
Aaron Marcuse-Kubitza
03:35 AM Revision 10114: bin/map: update_in_label(): use in_schema instead of the map spreadsheet column name when available, to allow using one spreadsheet for all datasources (which would not have a datasource-specific spreadsheet column name)
Aaron Marcuse-Kubitza
02:59 AM Revision 10113: schemas/util.sql: added mk_source_col(), which uses the schema name instead of the map spreadsheet header to get the datasource name
Aaron Marcuse-Kubitza
02:44 AM Revision 10112: schemas/util.sql: added table_schema()
Aaron Marcuse-Kubitza
01:15 AM Revision 10111: added planning/goals/iPlant_BIEN_Proposal_Final.pdf with Mark's e-mail notes in iPlant_BIEN_Proposal_Final.pdf.notes.txt
Aaron Marcuse-Kubitza

07/01/2013

11:52 PM Revision 10110: bugfix: schemas/util.sql: mk_map_table(): add trigger to remove metadata value entries from the map spreadsheet as it's being imported, since these do not correspond to actual columns in the staging table and will produce an error when trying to rename nonexistent columns to them. note that these entries will still need to be included properly in VegBIEN.csv, which will require changes to the VegBIEN.csv make target.
Aaron Marcuse-Kubitza

06/28/2013

04:54 PM Revision 10109: empty inputs/*/import_order.txt: added subdirs in the order they are used by inputs/input.Makefile, by running make on the inputs to auto-populate import_order.txt. import_order.txt is needed by the runscripts to run the right set of subdirs in the right order.
Aaron Marcuse-Kubitza
04:48 PM Revision 10108: added inputs/.TNRS/grants.sql, with statements to provide SELECT access to bien_read. these statements must be in grants.sql to avoid them being filtered out by pg_dump_limit.
Aaron Marcuse-Kubitza
04:47 PM Revision 10107: inputs/input.Makefile: added support for separate grants.sql file, which may contain GRANT statements that would normally be filtered out by pg_dump_limit
Aaron Marcuse-Kubitza
04:44 PM Revision 10106: inputs/input.Makefile: sql/install: added $debug option to run the *.sql import verbosely, to display which statements are being run. this should only be used for SQL files that use COPY FROM to import data, to avoid echoing pages of insert statements.
Aaron Marcuse-Kubitza
01:53 PM Revision 10105: inputs/input.Makefile: keep $(sortFile) up-to-date: use sort_file_updated=1 flag to indicate that import_order.txt has already been checked, so that recursive invocations of make don't need to recheck it. also use this flag instead of an explicit $(MAKECMDGOALS) list to prevent the $(sortFile) check from being infinite-recursively reinvoked when input.Makefile is read as part of the $(sortFile) check itself.
Aaron Marcuse-Kubitza
01:38 PM Revision 10104: inputs/input.Makefile: keep import_order.txt up-to-date by running `make $(sortFile)` each time make is run. this ensures that new datasources always have import_order.txt populated when make is first run. eventually, $(tables) can be always set to $(allTables) so that this auto-updating can also be used to ensure that new subdirs added by the user always make it into import_order.txt (so that they will be included in the subdirs that get remade, etc.). import_order.txt is primarily for specifying the order of the subdirs, but some datasources also use it to filter *out* subdirs, so it can't yet be always updated to include the full list of subdirs. however, the filter-out usage should no longer be necessary after the switch to new-style import.
Aaron Marcuse-Kubitza
12:58 PM Revision 10103: inputs/input.Makefile: added $(filter_make), used to filter the output of embedded $(shell make ...) invocations
Aaron Marcuse-Kubitza
11:39 AM Revision 10102: inputs/input.Makefile: $(sortFile): use $(filter-out)->then instead of $(filter)->else for clarity
Aaron Marcuse-Kubitza
11:21 AM Revision 10101: inputs/input.Makefile: added $(sortFile) (import_order.txt) target which adds any missing tables to import_order.txt
Aaron Marcuse-Kubitza
11:03 AM Revision 10100: inputs/input.Makefile: added list_tables to print $(tables) for use in populating import_order.txt
Aaron Marcuse-Kubitza
02:50 AM Revision 10099: web/links/index.htm: updated to Firefox bookmarks. grouped version control systems into new version control folder.
Aaron Marcuse-Kubitza

06/27/2013

09:54 PM Revision 10098: inputs/.NCBI/: added new-style import runscripts, which renamed the staging table columns to VegCore
Aaron Marcuse-Kubitza
04:48 PM Revision 10097: bugfix: lib/runscripts/datasrc_dir.run, subdir.run: need to remove leading . from dir name to get installed schema name, using new dir2schema()
Aaron Marcuse-Kubitza
04:47 PM Revision 10096: lib/runscripts/datasrc_dir.run, subdir.run: use new lib/sh/datasrc.sh, which contains code in common to both datasrc-related dir runscripts
Aaron Marcuse-Kubitza
04:46 PM Revision 10095: added lib/sh/datasrc.sh
Aaron Marcuse-Kubitza
03:47 PM Revision 10094: inputs/.TNRS/schema.sql: AcceptedTaxon: removed Annotations entry because the accepted name only contains name elements, not additional text (vegpath.org/cf_aff)
Aaron Marcuse-Kubitza
01:02 PM Revision 10093: bugfix: /README.TXT: Maintenance: syncing ~/bien to ~/Dropbox/svn: added overwrite=1 so that perms transfer from the authoritative ~/bien regardless of relative mtimes
Aaron Marcuse-Kubitza
12:45 PM Revision 10092: removed no longer used lib/import.sh. use lib/runscripts/table.run instead.
Aaron Marcuse-Kubitza
12:28 PM Revision 10091: added inputs/*/*/header.csv for CSV inputs, which are now generated by inputs/input.Makefile %/install
Aaron Marcuse-Kubitza
12:23 PM Revision 10090: added inputs/FIA/*/{VegBIEN.csv,test.xml.ref}, which are now generated by the mapping process for the joined-together tables (even though they are not used by the import, because only occurrence_all is imported)
Aaron Marcuse-Kubitza
12:20 PM Revision 10089: added inputs/GBIF/_archive/
Aaron Marcuse-Kubitza
12:18 PM Revision 10088: removed inputs/GBIF/Specimen/, which has been replaced by the refresh in raw_occurrence_record_plants/
Aaron Marcuse-Kubitza
12:17 PM Revision 10087: added inputs/GBIF/map.csv, used to regenerate inputs/GBIF/raw_occurrence_record_plants/map.csv when raw_occurrence_record_plants is resubset
Aaron Marcuse-Kubitza
12:12 PM Revision 10086: inputs/FIA/*/postprocess.sql: removed svn:executable attribute using `svn pdel svn:executable ...` now that these are not shell scripts
Aaron Marcuse-Kubitza
12:11 PM Revision 10085: removed no longer needed inputs/FIA/import. use inputs/FIA/run instead.
Aaron Marcuse-Kubitza
12:10 PM Revision 10084: inputs/FIA/*/import: changed to postprocess.sql for use by the runscripts
Aaron Marcuse-Kubitza
04:27 AM Revision 10083: added inputs/FIA/run
Aaron Marcuse-Kubitza
04:26 AM Revision 10082: added inputs/FIA/*/run. these do not yet use the postprocessing operations in */import.
Aaron Marcuse-Kubitza
04:24 AM Revision 10081: added inputs/FIA/table.run (for use by table subdirs) and helper Makefile
Aaron Marcuse-Kubitza
04:17 AM Revision 10080: added lib/runscripts/view.run, for use with table subdirs for views, such as inputs/FIA/occurrence_all/
Aaron Marcuse-Kubitza
02:14 AM Revision 10079: planning/timeline/timeline.2013.xls: added Reload analytical database checkmark for every Rebuild core database checkmark, because these are always done together as part of the import process
Aaron Marcuse-Kubitza
01:41 AM Revision 10078: bugfix: inputs/FIA/occurrence_all/import: don't re-prepend * to terms because this is a view, and the underlying columns have already been mapped
Aaron Marcuse-Kubitza
01:40 AM Revision 10077: bin/src_map: support custom (or no) new_term_prefix. no new_term_prefix is useful for views whose columns have already been renamed in the underlying tables and should not have * re-prepended.
Aaron Marcuse-Kubitza
01:03 AM Revision 10076: planning/timeline/timeline.2013.xls: moved longer-term goals to new August column, leaving near-term goals in July
Aaron Marcuse-Kubitza
01:00 AM Revision 10075: planning/timeline/timeline.2013.xls: erased cells where a task was planned but not worked on, so that all shaded cells in the past have check marks to indicate completion of a portion of the task, and empty shaded cells in the future indicate work left to do
Aaron Marcuse-Kubitza
12:50 AM Revision 10074: planning/timeline/timeline.2013.xls: updated for current progress. renamed "Rerun species range models" to "Prepare to rerun species range models" because the range modeling itself is not part of the BIEN DB development. added a column for July with the tasks that are not yet complete.
Aaron Marcuse-Kubitza

06/26/2013

06:57 PM Revision 10073: bugfix: inputs/FIA/REF_SPECIES/import: PLANT_SYMBOL_TYPE: prepended * since it's a datasource column, and needs to match up with *PLANT_SYMBOL_TYPE in other table for joins
Aaron Marcuse-Kubitza
06:57 PM Revision 10072: bugfix: inputs/FIA/REF_SPECIES/import: PLANT_SYMBOL_TYPE: prepended * since it's a datasource column, and needs to match up with *PLANT_SYMBOL_TYPE in other table for joins
Aaron Marcuse-Kubitza
06:23 PM Revision 10071: schemas/util.sql: try_create(): also ignore wrong_object_type exceptions thrown when trying to alter a view's columns
Aaron Marcuse-Kubitza
03:36 PM Revision 10070: added inputs/FIA/_src/run, which runs ./download
Aaron Marcuse-Kubitza
03:00 PM Revision 10069: lib/sh/make.sh: make(): run sys_cmd_path at a higher log_level since the make() steps should not be displayed by default
Aaron Marcuse-Kubitza
02:58 PM Revision 10068: /README.TXT: to synchronize vegbiendev, jupiter, and your local machine: added step to update mtimes/perms on ~/Dropbox/svn/ so that copying files back to ~/bien does not overwrite the permissions from what is on vegbiendev
Aaron Marcuse-Kubitza
02:44 PM Revision 10067: inputs/: don't upload test*.xml to jupiter on vegbiendev, because these files are also generated by the full database import but should only be backed up from one source machine, starscream (the Mac)
Aaron Marcuse-Kubitza
02:26 PM Revision 10066: bin/make: moved $make_filter_active test to lib/sh/make.sh make() so that it's also used when make() is run directly (e.g. in a runscript) rather than via the bin/make wrapper in the PATH
Aaron Marcuse-Kubitza
02:22 PM Revision 10065: bugfix: lib/sh/make.sh: make(): need to match absolute `make` paths such as /usr/bin/make
Aaron Marcuse-Kubitza
02:19 PM Revision 10064: lib/sh/util.sh: added self_name alias and use it in self/self_sys
Aaron Marcuse-Kubitza
02:18 PM Revision 10063: lib/sh/util.sh: added sys_cmd_path() and use it in cmd2sys
Aaron Marcuse-Kubitza
01:05 PM Revision 10062: bugfix: bin/make: use separate $make_filter_active flag instead of $is_outermost for avoiding duplicate output filtering, so that an outer runscript, which sets $is_outermost but does not activate the make filter, will not prevent the make filter from being activated when make is invoked
Aaron Marcuse-Kubitza
01:00 PM Revision 10061: bugfix: bin/make: need to use sys_cmd instead of command so that the system make command is invoked instead of the wrapper (which would cause infinite mutual recursion for the ~/bien working copy, although not for the ~/Dropbox/svn working copy because nonrecursive=1 was able to remove the single recursion)
Aaron Marcuse-Kubitza
12:19 PM Revision 10060: bin/make: use .rel to do relative includes
Aaron Marcuse-Kubitza
12:19 PM Revision 10059: bugfix: lib/sh/util.sh: .rel(): first use realpath() on BASH_SOURCE[1] in case it's a symlink (as it is for bin/make)
Aaron Marcuse-Kubitza
12:00 PM Revision 10058: inputs/FIA/_src/Makefile: Extraction: $(zips): use $(allZips) containing a zip for each state so that states that have not yet been downloaded and extracted (or had an empty dir created for them) will be downloaded. previously, the extract target only expanded existing zips but did not download new zips unless no zips had yet been downloaded. (this had been necessary because some states do not have a download, and the download of them would be continuously retried every time the Makefile was run.)
Aaron Marcuse-Kubitza
11:51 AM Revision 10057: bugfix: inputs/FIA/_src/Makefile: `%: %.zip`: if unzip fails because the download does not exist, create an empty dir for the state instead of aborting make
Aaron Marcuse-Kubitza
11:33 AM Revision 10056: inputs/FIA/_src/Makefile: use curl instead of wget because that is also available on Mac
Aaron Marcuse-Kubitza
11:32 AM Revision 10055: bugfix: lib/sh/web.sh: curl(): use --fail so that curl returns a nonzero exit status on error (e.g. file not found) instead of appearing to exit successfully but outputting an error HTML document instead of the file
Aaron Marcuse-Kubitza
11:05 AM Revision 10054: inputs/FIA/SUBPLOT/map.csv, import: prepended * to all FIA terms to clearly distinguish them from the VegCore terms. this is the standard convention for all datasources, to indicate which terms have not yet been mapped, but was not yet implemented at the beginning of new-style import (the FIA refresh was the first new-style datasource).
the following replacements were performed to make this change:
in all map.csv: replace regexp (?<=,)(?=[A-Z_]{2,}) wi...
Aaron Marcuse-Kubitza
08:59 AM Revision 10053: inputs/FIA/import_order.txt: added remaining src tables, whose runscripts will be invoked in the order listed by lib/runscripts/datasrc_dir.run
Aaron Marcuse-Kubitza
08:58 AM Revision 10052: added inputs/FIA/*/_no_import to src tables that are joined together in occurrence_all and should not also be imported separately once they are in import_order.txt
Aaron Marcuse-Kubitza
07:55 AM Revision 10051: inputs/GBIF/run: inherit from lib/runscripts/datasrc_dir.run, which uses import_order.txt to forward calls to the subdirs
Aaron Marcuse-Kubitza
07:54 AM Revision 10050: added blank runscripts inputs/GBIF/Source/run, Specimen/run because they are in import_order.txt (used by lib/runscripts/datasrc_dir.run)
Aaron Marcuse-Kubitza
12:34 AM Revision 10049: bugfix: bin/make: do not alter the PATH passed to the invoked make command, since this is a general-purpose wrapper and is not linked to a specific working copy (it could be used to wrap any make invocation, not just for commands in the svn dir). this uses lib/sh/local.sh's new PATH_add= flag.
Aaron Marcuse-Kubitza
12:30 AM Revision 10048: lib/sh/local.sh: added PATH_add= flag to allow turning off the addition of $bin_dir_abs to the PATH. this is useful for wrapper scripts that should not alter the PATH passed to their invoked command.
Aaron Marcuse-Kubitza
12:28 AM Revision 10047: bugfix: lib/sh/make.sh: make(): invoke only the system make command instead of any wrapper for it in the PATH (by using self_sys instead of self), to prevent infinite recursion. single recursion is resolved by nonrecursive=1, but there are cases where mutual recursion occurs due to the presence of two, different bin/makes in the PATH (e.g. if you have two working copies with bin/make, and one is symlinked in your ~/bin/ folder), and these cases can only be resolved by clearing out the PATH completely (since the bin/makes do not know of each other's existence, in order to remove their parent dirs from the PATH).
Aaron Marcuse-Kubitza
12:23 AM Revision 10046: lib/sh/util.sh: self_sys alias: use new sys_cmd() instead of `command -p` so that only the command path resolution is performed with a limited PATH, and the invoked command itself inherits the full PATH
Aaron Marcuse-Kubitza
12:22 AM Revision 10045: lib/sh/util.sh: added sys_cmd(), which runs a system command and allows running a system command of the same name as the script
Aaron Marcuse-Kubitza
12:20 AM Revision 10044: lib/sh/util.sh: added echo_builtin()
Aaron Marcuse-Kubitza

06/25/2013

06:37 PM Revision 10043: inputs/.rsync_ignore: test*.xml: turn on syncing again, but always treat the local side of the sync (starscream or vegbiendev) as the authoritative copy since they are the machines the tests can be run on
Aaron Marcuse-Kubitza
05:18 PM Revision 10042: /.rsync_ignore: temp files: hide them on upload so that they are never synced to jupiter. hiding is different than unidirectionally exclude'ing them, because it also causes them to be deleted on the destination if they were uploaded in previous syncs.
Aaron Marcuse-Kubitza
04:57 PM Revision 10041: inputs/VegBIEN/TWiki/.rsync_ignore: /**: turn syncing back on, but only allow it unidirectionally from vegbiendev->jupiter->starscream to avoid clobbering the live site or the jupiter backup. this is probably the only dir whose authoritative copy is *always* on vegbiendev. for all other dirs, edits can be made wherever convenient, so no copy is authoritative and no sync directions need to be restricted.
Aaron Marcuse-Kubitza
04:27 PM Revision 10040: /README.TXT: Maintenance: synchronization: fixed whitespace
Aaron Marcuse-Kubitza
04:07 PM Revision 10039: inputs/.rsync_ignore: install.log.sql: only exclude this on starscream (the local machine), using new machine-specific .rsync_filters, so that vegbiendev's copies of this will be backed up
Aaron Marcuse-Kubitza
03:46 PM Revision 10038: lib/sh/sync.sh: upload(): .rsync_filter: also support machine-specific filters, for cases when different machines produce the same file (e.g. a log file) but only one machine's copy should be backed up
Aaron Marcuse-Kubitza
03:43 PM Revision 10037: /README.TXT: Maintenance: to synchronize a Mac's settings with my testing machine's: removed filters that are now handled by .rsync_ignores
Aaron Marcuse-Kubitza
03:31 PM Revision 10036: added inputs/GBIF/_src/.rsync_filter.upload,download to prevent old versions of GBIFPortalDB-*.dump.gz from being downloaded to the local machine, while keeping them on jupiter. this avoids the need to store these files in ~/Documents/BIEN/large_files/ with symlinks from inputs/GBIF/_src/ to exclude them from the sync.
Aaron Marcuse-Kubitza
03:17 PM Revision 10035: bugfix: /README.TXT: Maintenance: to synchronize a Mac's settings with my testing machine's: sync ~/Dropbox/svn/ (the no-unversioned-files working copy) separately from the rest of the files, because .svn/ is now excluded by /.rsync_ignore, so that `svn up` needs to be used to keep the .svn/ dirs in sync. note that .svn/ should generally not be synced between machines, because they may use incompatible versions of the svn working copy format.
Aaron Marcuse-Kubitza
03:02 PM Revision 10034: /README.TXT: Maintenance: to synchronize a Mac's settings with my testing machine's: use new bin/sync_upload (with $sync_remote_subdir) so that per-dir .rsync_ignores are processed, and to use the default $sync_remote_url
Aaron Marcuse-Kubitza
02:57 PM Revision 10033: lib/sh/local.sh: $sync_remote_url: allow user to override just the sync subdir (not the whole URL) in $sync_remote_subdir. this is useful e.g. for backing up the Mac's files to jupiter.
Aaron Marcuse-Kubitza
02:28 PM Revision 10032: /README.TXT: Maintenance: to synchronize vegbiendev, jupiter, and your local machine: use new bin/sync_upload instead of specifying all the filter patterns manually. this replaces several `put` commands with various filters with just a bin/sync_upload each on vegbiendev and your machine (in overwrite=1 mode to force a complete sync).
Aaron Marcuse-Kubitza
02:21 PM Revision 10031: bugfix: backups/.rsync_filter.download: need to prevent existing backups from being deleted on the local side, too, by changing hide patterns to exclude
Aaron Marcuse-Kubitza
02:11 PM Revision 10030: lib/sh/sync.sh: upload(): make put's $subpath option relative to the currdir instead, like the --include paths. note that $subpath unfortunately can't be used in subdirs at this point because it will cause rsync to ignore the .rsync_ignores and .rsync_filters in parent dirs, including the essential .rsync_ignore in the sync root dir.
Aaron Marcuse-Kubitza
01:42 PM Revision 10029: /README.TXT: removed unnecessary `env` before kw params, which are treated as such whenever they appear before a command name
Aaron Marcuse-Kubitza
01:22 PM Revision 10028: bugfix: /README.TXT: updated `make backups/download` to `make backups/<file>/download`
Aaron Marcuse-Kubitza
01:21 PM Revision 10027: backups/Makefile: upload: use bin/sync_upload
Aaron Marcuse-Kubitza
01:12 PM Revision 10026: inputs/Makefile: download-logs: use bin/sync_upload like upload/download
Aaron Marcuse-Kubitza
01:07 PM Revision 10025: bugfix: /README.TXT: `make inputs/upload`, `make inputs/download`: added live=1 so that the sync operation runs rather than previewing what will be synced. removed test=1 because this flag is not used by put.
Aaron Marcuse-Kubitza
01:00 PM Revision 10024: bugfix: inputs/Makefile: upload, download: need to exclude files in .rsync_ignore, so that large local-only files, such as inputs/GBIF/raw_occurrence_record_plants/table*.tsv, do not have to be synced before `make inputs/upload` can complete (the corresponding .gz gets extracted instead); and deleted temp files in inputs/VegBIEN/TWiki/, such as active sessions, are not added back to the live copy on vegbiendev. previously, fixing this required extracting the rsync command run by `make inputs/upload`, etc. and manually editing it to exclude the applicable .rsync_ignore files, each time `make inputs/upload`, etc. was run (including before every column-based import).
Aaron Marcuse-Kubitza
12:23 PM Revision 10023: bugfix: bin/make: need to leave bin/, ~/bin/ in the PATH when running make nonrecursively, so that commands invoked by it which are located in these dirs (e.g. put, which will be used by `make inputs/upload`) can still be found. this requires using command()'s new nonrecursive=1 flag instead of running no_PATH_recursion, so that no_PATH_recursion() only affects the resolution of the command path, but does not propagate the filtered PATH to the invoked command itself.
Aaron Marcuse-Kubitza
12:18 PM Revision 10022: lib/sh/util.sh: command(): added nonrecursive=1 flag, which uses cmd2abs_path to run an external command nonrecursively
Aaron Marcuse-Kubitza
12:16 PM Revision 10021: lib/sh/util.sh: added cmd2abs_path, which makes the command in $1 nonrecursive
Aaron Marcuse-Kubitza
11:37 AM Revision 10020: bugfix: lib/sh/util.sh: PATH_rm(): also need to remove adjacent occurrences of the same path (or occurrences which become adjacent when other paths are removed), which :...: matching wasn't doing because the trailing : is consumed, preventing it from being matched at the beginning of the next path. since unlike filesystem paths with /, it is not necessary for a match to span multiple :-separated sections, we can just use new split() to split apart the PATH into an array of paths, filter each path, and join() them back together.
Aaron Marcuse-Kubitza
11:33 AM Revision 10019: lib/sh/util.sh: added split()
Aaron Marcuse-Kubitza
10:32 AM Revision 10018: lib/sh/util.sh: auto-echo common external commands: added `which`
Aaron Marcuse-Kubitza
10:32 AM Revision 10017: lib/sh/util.sh: auto-echo common external commands: use simpler echo_run instead of command since logging handling is not needed
Aaron Marcuse-Kubitza
08:50 AM Revision 10016: added backups/vegbien.r9897.backup.md5
Aaron Marcuse-Kubitza

06/23/2013

09:30 PM Revision 10015: lib/sh/sync.sh: upload(): documented that each --include path is relative to the *currdir*, not the root dir of the upload ($local_dir). this feature, although previously unintended, is actually better because the user can change to a subdir of the root dir and specify upload paths relative to the dir they are in. however, when invoking upload() from a script with --include paths specified, this means you need to use an absolute path (e.g. "$(dirname "${BASH_SOURCE[0]}")"/...; or the value that will become $local_dir, which for sync_upload() is $root_dir).
Aaron Marcuse-Kubitza
08:56 PM Revision 10014: backups/.rsync_ignore: replaced with .rsync_filter.upload to allow uploading new backups but not deleting existing backups if they don't exist on the local (rsync-invoking) side; and .rsync_filter.download to avoid downloading backups to the local side. this allows storing older backups just on jupiter, where there is much more disk space. note that this change must be made on the *remote* side (jupiter) for it to be effective, because these are remote-side rules and are only processed by the remote-side rsync instance.
Aaron Marcuse-Kubitza
08:55 PM Revision 10013: lib/sh/sync.sh: upload(): use directional .rsync_filter to supplement .rsync_ignore with all kinds of --filter rules. separate .rsync_filters are needed for the upload (swap=) and download (swap=1) directions because the sender and the receiver are reversed, causing asymmetric rules like protect/hide to change meaning.
Aaron Marcuse-Kubitza
07:48 PM Revision 10012: updated backups/TNRS.backup.md5
Aaron Marcuse-Kubitza
07:48 PM Revision 10011: added backups/TNRS.2013-6-17.backup.md5, TNRS.2013-6-22.backup.md5
Aaron Marcuse-Kubitza
03:58 PM Revision 10010: /README.TXT: Backups: TNRS cache: Back up/Restore: added runtimes (3 min/5.5 min)
Aaron Marcuse-Kubitza
03:52 PM Revision 10009: lib/sh/sync.sh: upload(): usage: documented put's swap=1 flag, which downloads instead of uploads
Aaron Marcuse-Kubitza
03:47 PM Revision 10008: added inputs/GBIF/raw_occurrence_record_plants/.rsync_ignore with filters that have previously needed to be manually added whenever `make inputs/upload` was run
Aaron Marcuse-Kubitza
03:46 PM Revision 10007: added inputs/GBIF/_MySQL/.rsync_ignore with filters from /README.TXT > Maintenance > to synchronize vegbiendev, jupiter, and your local machine. these filters will now be used with bin/sync_upload in addition to the periodic backup commands.
Aaron Marcuse-Kubitza
03:45 PM Revision 10006: added inputs/VegBIEN/TWiki/.rsync_ignore with filters from /README.TXT > Maintenance > to synchronize vegbiendev, jupiter, and your local machine. these filters will now be used with bin/sync_upload in addition to the periodic backup commands.
Aaron Marcuse-Kubitza
03:44 PM Revision 10005: added inputs/.rsync_ignore with filters from inputs/Makefile $(rsyncSrcs). these filters will now be used with bin/sync_upload in addition to `make inputs/upload`.
Aaron Marcuse-Kubitza
03:43 PM Revision 10004: added bin/.rsync_ignore with filters from /README.TXT > Maintenance > to synchronize vegbiendev, jupiter, and your local machine. these filters will now be used with bin/sync_upload in addition to the periodic backup commands.
Aaron Marcuse-Kubitza
03:40 PM Revision 10003: added backups/.rsync_ignore with filters from /README.TXT > Maintenance > to synchronize vegbiendev, jupiter, and your local machine. these filters will now be used with bin/sync_upload in addition to the periodic backup commands.
Aaron Marcuse-Kubitza
03:36 PM Revision 10002: /.rsync_ignore: added *.pyc
Aaron Marcuse-Kubitza
03:36 PM Revision 10001: added /.rsync_ignore with filters from lib/common.Makefile $(rsync). these filters will now be used with bin/sync_upload in addition to `make inputs/upload`.
Aaron Marcuse-Kubitza
03:34 PM Revision 10000: lib/sh/sync.sh: upload(): use --exclude filters from per-dir .rsync_ignore. note that --exclude-from can't be used for this, because it is relative to the currdir, not the rsync root, and therefore also requires the .rsync_ignore to exist rather than using it only if it exists.
Aaron Marcuse-Kubitza

06/22/2013

12:23 AM Revision 9999: bin/tnrs_db: documented total runtime (10 days)
Aaron Marcuse-Kubitza

06/21/2013

11:58 PM Revision 9998: bin/tnrs_db: documented current runtime (162 ms/name)
Aaron Marcuse-Kubitza

06/20/2013

10:58 PM Revision 9997: web/links/index.htm: updated to Firefox bookmarks. sorted NCEAS bookmarks to put homepage and support pages first.
Aaron Marcuse-Kubitza
06:21 PM Revision 9996: /README.TXT: Full database import: To run TNRS, etc. after the main import: clarified that you should only run `export version=<version>` if the import is named something *other than* public (i.e. it has not yet replaced the previous public schema)
Aaron Marcuse-Kubitza
06:14 PM Revision 9995: /README.TXT: Full database import: To run TNRS: removed `by_col=1` because by-column mode is not applicable to running TNRS. it is, however, needed when running import_scrub (i.e. `make inputs/<datasrc>/reimport_scrub by_col=1`).
Aaron Marcuse-Kubitza
06:10 PM Revision 9994: inputs/.TNRS/schema.sql: tnrs: vegbiendev update steps: added `make backups/TNRS.backup-remake` to back up TNRS before making changes to it. this provides a more recent restore point than the last import in case the changes mess things up. (however, the last import's backup is usually sufficient unless TNRS has been run since then.)
Aaron Marcuse-Kubitza
05:53 PM Revision 9993: inputs/.TNRS/schema.sql: tnrs_populate_fields(): added VACUUM ANALYZE and runtime (50 s)
Aaron Marcuse-Kubitza
05:42 PM Revision 9992: inputs/.TNRS/schema.sql: tnrs_populate_fields(): updated runtime (16 min)
Aaron Marcuse-Kubitza
05:09 PM Revision 9991: schemas/VegBIEN/taxonomy/higherPlantGroup.xlsx.src.txt: added Brad's comment that there are some holes in the Embryophyte subclasses list, and we need to validate it
Aaron Marcuse-Kubitza
04:49 PM Revision 9990: inputs/.TNRS/schema.sql: tnrs: documented that when changing this table's schema, you must also make the same changes on vegbiendev. included sample util.set_col_types() call with runtime (4 min).
Aaron Marcuse-Kubitza
03:58 PM Revision 9989: inputs/.TNRS/schema.sql: tnrs_populate_fields(): updated runtime (16 min)
Aaron Marcuse-Kubitza
03:32 PM Revision 9988: bugfix: inputs/.TNRS/schema.sql: tnrs_populate_fields(): need to schema-qualify invoked functions
Aaron Marcuse-Kubitza
03:29 PM Revision 9987: bugfix: inputs/.TNRS/schema.sql: tnrs_populate_fields(): Is_homonym: use the *_is_homonym flag for whichever of genus or family (in that order) is NOT NULL, rather than horizontal-ORing potentially NULL values together
Aaron Marcuse-Kubitza
03:22 PM Revision 9986: bugfix: inputs/.TNRS/schema.sql: family_is_homonym(), genus_is_homonym(): need to return NULL instead of false when input family/genus is NULL. EXISTS() does not support this, so STRICT is used to provide this functionality automatically.
Aaron Marcuse-Kubitza
03:19 PM Revision 9985: inputs/.TNRS/schema.sql: added family_is_homonym(), genus_is_homonym() and use them in tnrs_populate_fields()
Aaron Marcuse-Kubitza
03:15 PM Revision 9984: inputs/.TNRS/schema.sql: score_ok(): changed to IMMUTABLE and STRICT
Aaron Marcuse-Kubitza
03:14 PM Revision 9983: inputs/.TNRS/schema.sql: tnrs_populate_fields(): updated runtime (16 min)
Aaron Marcuse-Kubitza
02:41 PM Revision 9982: inputs/.TNRS/schema.sql: tnrs_populate_fields(): never_homonym: use Author_score threshold to exclude matches that are too fuzzy to confirm the presence of a plant name author
Aaron Marcuse-Kubitza
02:38 PM Revision 9981: bugfix: inputs/.TNRS/schema.sql: tnrs_populate_fields(): *_is_homonym: also need to check that there was no Author_matched (i.e. that it could be a homonym). Is_homonym: use new never_homonym var.
Aaron Marcuse-Kubitza
02:18 PM Revision 9980: inputs/.TNRS/schema.sql: tnrs_populate_fields(): updated runtime (18 min)
Aaron Marcuse-Kubitza
02:17 PM Revision 9979: inputs/import.stats.xls: Updated import times
Aaron Marcuse-Kubitza
02:07 PM Revision 9978: planning/workflow/bien3_architecture.pptx: stage II: removed Step prefix before stage #, which the other slides don't have
Aaron Marcuse-Kubitza
01:57 PM Revision 9977: added planning/workflow/bien3_architecture/stages.png
Aaron Marcuse-Kubitza
01:36 PM Revision 9976: added planning/workflow/bien3_architecture/stage_*.png
Aaron Marcuse-Kubitza
12:54 PM Revision 9975: added planning/workflow/bien3_architecture.pptx
Aaron Marcuse-Kubitza
08:20 AM Revision 9974: inputs/.TNRS/schema.sql: tnrs_populate_fields(): when changing this function: UPDATE statement: include TNRS schema since it may not be in the search_path
Aaron Marcuse-Kubitza
08:14 AM Revision 9973: inputs/.TNRS/schema.sql: tnrs_populate_fields(): Is_plant: also consider homonyms using new family_is_homonym, genus_is_homonym (see wiki.vegpath.org/Result_filtering#taxon_is_plant)
Aaron Marcuse-Kubitza
08:03 AM Revision 9972: inputs/.TNRS/schema.sql: tnrs: added Is_homonym derived col (uses IRMNG.family_homonym_epithet, genus_homonym_epithet)
Aaron Marcuse-Kubitza
07:54 AM Revision 9971: schemas/vegbien.sql: re-ran `make schemas/public/reinstall; make schemas/remake` cycle, which apparently changed sort order of statements
Aaron Marcuse-Kubitza
07:11 AM Revision 9970: /README.TXT: Full database import: disk space check: updated minimum (to 300GB) for new import schema size. note that most of the space (166GB) is indexes, and even of the 87GB of data, only 20GB is from GBIF and 15GB from FIA (so most of it is duplication).
Aaron Marcuse-Kubitza
07:07 AM Revision 9969: added inputs/IRMNG/*_homonym_epithet/map.csv, etc. (created by */run)
Aaron Marcuse-Kubitza
07:01 AM Revision 9968: bugfix: inputs/input.Makefile: `%/install %/header.csv: %/create.sql`: in noclobber mode, mark %/header.csv as .PRECIOUS so the existing file won't be deleted if the table already exists (causing an error exit)
Aaron Marcuse-Kubitza
06:54 AM Revision 9967: bugfix: lib/runscripts/table.run: remake_VegBIEN_mappings(): run yes using piped_cmd() so the SIGPIPE doesn't cause an errexit
Aaron Marcuse-Kubitza
06:45 AM Revision 9966: added inputs/IRMNG/{genus_homonym_epithet,family_homonym_epithet}/run, which inherit from ../table.run so that load_data() (which runs create.sql) is invoked
Aaron Marcuse-Kubitza
06:44 AM Revision 9965: added inputs/IRMNG/species_homonyms/new_terms.csv
Aaron Marcuse-Kubitza
06:43 AM Revision 9964: bugfix: added no-op inputs/IRMNG/Source/run so inputs/IRMNG/run would have something to invoke for it
Aaron Marcuse-Kubitza
06:35 AM Revision 9963: inputs/IRMNG/run: use lib/runscripts/datasrc_dir.run, which now provides import() and $subdirs
Aaron Marcuse-Kubitza
06:34 AM Revision 9962: lib/runscripts/datasrc_dir.run: extend import.run and provide an import() implementation that runs all the runscripts for import_order.txt subdirs
Aaron Marcuse-Kubitza
06:20 AM Revision 9961: lib/csvs.py: sniff(): support single-column spreadsheets by defaulting to the Excel dialect when the delimiter can't be determined
Aaron Marcuse-Kubitza
06:09 AM Revision 9960: inputs/IRMNG/: added family_homonym_epithet, genus_homonym_epithet lookup tables, which use util.all_same() to filter out internal Plantae homonyms
Aaron Marcuse-Kubitza
05:44 AM Revision 9959: schemas/util.sql: added all_same() aggregate
Aaron Marcuse-Kubitza
05:31 AM Revision 9958: schemas/util.sql: added not_empty(anyarray)
Aaron Marcuse-Kubitza
12:14 AM Revision 9957: schemas/util.sql: added not_null() (usable as an aggregate's FINALFUNC)
Aaron Marcuse-Kubitza
12:13 AM Revision 9956: schemas/util.sql: added not_null() (usable as an aggregate's FINALFUNC)
Aaron Marcuse-Kubitza

06/19/2013

10:18 PM Revision 9955: bugfix: inputs/IRMNG/import_order.txt: need to specify order so that Source is first
Aaron Marcuse-Kubitza
10:16 PM Revision 9954: bugfix: inputs/IRMNG/*/map.csv: remapped Authority to scientificNameAuthorship instead of authors (now data_authors <VegCore.vegpath.org?data_authors> for clarity)
Aaron Marcuse-Kubitza
09:59 PM Revision 9953: inputs/IRMNG/map.csv: updated to scrubbed output names from */map.csv (/map.csv does not currently get scrubbed)
Aaron Marcuse-Kubitza
09:51 PM Revision 9952: bugfix: inputs/IRMNG/species_homonyms/header.csv, map.csv: reset input columns to DSV (delim-separated values) header. they had gotten changed to the output names in running map.csv with remake=1, causing it to be remade from the (renamed) staging tables.
Aaron Marcuse-Kubitza
08:54 PM Revision 9951: inputs/input.Makefile: $(_svnFilesGlob): added *Makefile
Aaron Marcuse-Kubitza
08:51 PM Revision 9950: /README.TXT: `make inputs/{upload,download}`: first run with test=1 to see what the diffs will be
Aaron Marcuse-Kubitza
08:47 PM Revision 9949: added inputs/IRMNG/, including runscripts to download the names. this is now the 2nd datasource after GBIF to use runscripts, and the 3rd after FIA/GBIF to use new-style import.
Aaron Marcuse-Kubitza
08:45 PM Revision 9948: inputs/input.Makefile: $(_svnFilesGlob): added *run (runscripts)
Aaron Marcuse-Kubitza
08:24 PM Revision 9947: lib/runscripts/table.run: import(): also run remake_VegBIEN_mappings() to accept the test output. this function was previously unused, but was left in for future use when lib/import.sh was translated to lib/runscripts/table.run (it was used in its import.sh form in inputs/FIA/occurrence_all/import).
Aaron Marcuse-Kubitza
08:21 PM Revision 9946: bugfix: lib/runscripts/table.run: remake_VegBIEN_mappings(): need to change to $top_dir before running `rm header.csv map.csv`
Aaron Marcuse-Kubitza
08:18 PM Revision 9945: lib/sh/util.sh: added in_top_dir()
Aaron Marcuse-Kubitza
08:00 PM Revision 9944: lib/runscripts/table.run: remake_VegBIEN_mappings(): only remake header.csv, map.csv if this target is being run directly, to avoid needing to remake them every time. for tables that are views, this instead requires them to be explicitly remade when the view columns change.
Aaron Marcuse-Kubitza
07:07 PM Revision 9943: bugfix: lib/runscripts/subdir.run: subdir_make(): only remake if $remake has been explicitly propagated to subdir_make() by using self_make
Aaron Marcuse-Kubitza
06:51 PM Revision 9942: lib/sh/make.sh: added deferred_check_target_exists alias and use it in check_fake_target_exists
Aaron Marcuse-Kubitza
06:41 PM Revision 9941: added lib/sh/web.sh with curl wrapper
Aaron Marcuse-Kubitza
06:41 PM Revision 9940: lib/sh/make.sh: added check_wildcard_target_exists alias
Aaron Marcuse-Kubitza
06:37 PM Revision 9939: lib/sh/util.sh: added wildcard1 alias
Aaron Marcuse-Kubitza
06:37 PM Revision 9938: lib/sh/util.sh: added echo1()
Aaron Marcuse-Kubitza
06:32 PM Revision 9937: lib/runscripts/table.run: load_data(): first make sure schema is installed
Aaron Marcuse-Kubitza
06:31 PM Revision 9936: lib/runscripts/table.run: added datasrc_make_install()
Aaron Marcuse-Kubitza
06:31 PM Revision 9935: table_make_install(): take $install_log as an overridable kw param to support install logs in different locations
Aaron Marcuse-Kubitza
05:55 PM Revision 9934: lib/runscripts/table.run: load_data(): split noclobber functionality into separate table_make_install() function, which can be used by other install-related targets
Aaron Marcuse-Kubitza
03:27 PM Revision 9933: added schemas/VegBIEN/taxonomy/higherPlantGroup.xlsx.src.txt with Brad's description of how the names were chosen
Aaron Marcuse-Kubitza
02:37 PM Revision 9932: added schemas/VegBIEN/taxonomy/higherPlantGroup.xlsx
Aaron Marcuse-Kubitza
01:50 PM Revision 9931: schemas/VegBIEN/planning/taxonomy/: moved non-VegBIEN-specific resources to planning/resources/taxonomy/. this includes Brad's all-important Nomenclature_excerpt.ppt with the Latin taxonomic hierarchy suffixes on slide 5.
Aaron Marcuse-Kubitza
11:02 AM Revision 9930: bugfix: schemas/vegbien.sql: taxon_trait_view: use the TNRS-scrubbed name from ScrubbedTaxon when available
Aaron Marcuse-Kubitza
10:36 AM Revision 9929: schemas/vegbien.sql: split geoscrub_input_view's new-row-only filtering into separate view geoscrub_input_new, so that the full geoscrub_input rows are still available. the reduction in geoscrub_input from eliminating the already-scrubbed rows was only 280,000 (5076500 - 4799173) out of a possible 1.7 million (1707970), so it makes sense to just run geoscrubbing on the full input. (the lower-than-expected reduction is most likely due to rows from pre-refresh data being present in the original geoscrub_output table, which have been replaced by different, post-refresh input rows.)
Aaron Marcuse-Kubitza
10:18 AM Revision 9928: added exports/_archive/
Aaron Marcuse-Kubitza
10:17 AM Revision 9927: mappings/VegCore-VegBIEN.csv: genus->taxonlabel.taxonomicname: use new _filter_genus() (see r9882)
Aaron Marcuse-Kubitza
10:15 AM Revision 9926: backups/TNRS.backup.md5: updated
Aaron Marcuse-Kubitza
09:43 AM Revision 9925: bin/make_analytical_db: use new mk_table() instead of TRUNCATE/INSERT
Aaron Marcuse-Kubitza
09:41 AM Revision 9924: bin/make_analytical_db: added mk_table() and use it in mk_analytical_table()
Aaron Marcuse-Kubitza
09:30 AM Revision 9923: schemas/vegbien.sql: higher_plant_group_nodes: ferns and allies: added Lycopodiophyta node, as requested by Brad in the conference call (wiki.vegpath.org/2013-06-13_conference_call)
Aaron Marcuse-Kubitza
09:30 AM Revision 9922: schemas/vegbien.sql: geoscrub_input_view: exclude rows that have already been geoscrubbed, by anti-joining on geoscrub_output
Aaron Marcuse-Kubitza
09:11 AM Revision 9921: inputs/.geoscrub/geoscrub_output/postprocess.sql: set decimallatitude, decimallongitude types to double precision to facilitate joining with other double precision values
Aaron Marcuse-Kubitza
09:02 AM Revision 9920: inputs/.geoscrub/geoscrub_output/postprocess.sql: coords index: added rest of input columns so this can be used to check the existence of a result by input. added runtime (55 s). use idempotent create_if_not_exists().
Aaron Marcuse-Kubitza
08:17 AM Revision 9919: schemas/vegbien.sql: higher_plant_group_nodes: ferns and allies: added Lycopodiophyta node, as requested by Brad in the conference call (wiki.vegpath.org/2013-06-13_conference_call)
Aaron Marcuse-Kubitza
08:08 AM Revision 9918: bugfix: schemas/vegbien.sql: higher_plant_group_nodes: removed ferns and allies nodes Anthocerotophyta, Marchantiophyta, Bryophyta, which were incorrectly said to be part of this clade in the BIEN2 analytical DB overview (/planning/workflow/validation/BIEN2_Analytical_DB_overview.docx > p. 13 bottom > last ¶). see http://wiki.vegpath.org/2013-06-13_conference_call#fix-higher_plant_group_nodes-mapping .
Aaron Marcuse-Kubitza
07:58 AM Revision 9917: bugfix: /Makefile: postgres-Linux: phpPgAdmin: added steps to configure it for Apache 2.4
Aaron Marcuse-Kubitza

06/18/2013

07:49 PM Revision 9916: /run: geoscrub_input/make(): documented runtime (40 s)
Aaron Marcuse-Kubitza
06:22 PM Revision 9915: bin/make_analytical_db: added `/run export_` to make the geoscrub_input CSV export
Aaron Marcuse-Kubitza
06:21 PM Revision 9914: inputs/.TNRS/schema.sql: tnrs_populate_fields(): removed no longer needed casts of *_score to double precision
Aaron Marcuse-Kubitza
06:06 PM Revision 9913: inputs/.TNRS/schema.sql: tnrs: *_score: changed type to double precision because these fields are always floats. this also avoids the need to manually cast them to double precision each time they are used.
Aaron Marcuse-Kubitza
05:55 PM Revision 9912: lib/tnrs.py: HTTP requests: rewrapped lines
Aaron Marcuse-Kubitza
05:53 PM Revision 9911: lib/tnrs.py: updated HTTP requests to match current web app
Aaron Marcuse-Kubitza
05:51 PM Revision 9910: bugfix: lib/tnrs.py: download_request_template: changed dirty to true (to match the current web app), which is apparently needed to apply the source_sorting setting to the downloaded TSV in addition to the GUI results
Aaron Marcuse-Kubitza
05:29 PM Revision 9909: lib/tnrs.py: retrieval_request_template: turned source_sorting back off, because it causes any match from the first source to always be used, even if it has a lower match score than the match from the other source. (Brad confirms that this should be off.) I think we had this on originally to ensure that only Tropicos results were used when available, rather than USDA when it was a better match. *** note that due to a bug in the web app, this change will not actually be effective, because the source_sorting option is only applied to the GUI results, not the downloaded TSV. ***
Aaron Marcuse-Kubitza
04:27 PM Revision 9908: inputs/.TNRS/schema.sql: tnrs: Name_number: changed type to integer so it would sort numerically
Aaron Marcuse-Kubitza
04:24 PM Revision 9907: inputs/.TNRS/schema.sql: added pkey on Time_submitted, Name_number
Aaron Marcuse-Kubitza
04:21 PM Revision 9906: inputs/.TNRS/schema.sql: changed Name_submitted pkey to a unique constraint to allow adding a pkey on Time_submitted, Name_number instead
Aaron Marcuse-Kubitza
04:14 PM Revision 9905: inputs/.TNRS/schema.sql: Time_submitted, Name_number: added NOT NULL constraints so that they can be used in a unique constraint
Aaron Marcuse-Kubitza
02:21 PM Revision 9904: lib/tnrs.py: submission_request_template: include GCC in addition to Tropicos, because it provides more synonyms than Tropicos for Asteraceae, and the accepted names still match the Tropicos backbone (https://projects.nceas.ucsb.edu/nceas/projects/bien/wiki/2013-06-13_conference_call#include-GCC-when-running-TNRS)
Aaron Marcuse-Kubitza

06/17/2013

08:18 PM Revision 9903: inputs/.TNRS/tnrs/tnrs.make: removed no longer needed end time, now that the total runtime is printed
Aaron Marcuse-Kubitza
08:17 PM Revision 9902: inputs/.TNRS/tnrs/tnrs.make: print the total runtime using `time`
Aaron Marcuse-Kubitza
08:14 PM Revision 9901: inputs/.TNRS/tnrs/tnrs.make: include the end time in addition to the start time so that the total runtime can be calculated
Aaron Marcuse-Kubitza
07:59 PM Revision 9900: lib/sh/util.sh: command-specific alternate stdin/stdout/stderr: choice of 40/41/42: added mnemonic that 4 looks like A for Alternate
Aaron Marcuse-Kubitza
 

Also available in: Atom